テクネ計測 List of Products and Services

● Low-cost, compact, high-precision area flow meter (flow meter) ● Low leakage and capable of handling gases at the ppm level ● Panel embedding type with minimal protrusion, suitable for embedding in panels ● Compact and simple structure with a width of about 120mm, and selectable fittings for easy installation ● Compliant with RoHS directive ■ The NFM series is a panel embedding type flow meter with minimal protrusion width, suitable for embedding in panels. For more details, please download the catalog or contact us.

• Other measuring instruments

● Calibration at multiple temperature points achieves accurate measurements across the entire temperature range. ● The detection principle recommended by the Ministry of Economy, Trade and Industry is an optical sensor. ● Pressure and temperature correction functions. ● Available in wall-mounted and duct-insert types. ■ The EE8915 can reliably measure CO2 concentration under harsh conditions and complies with relevant railway standards. ■ Railway Standards EN50155:2017 - Electronic equipment used in railway vehicles EN50121-1:2017 - Electromagnetic compatibility - General EN50121-3-2:2016 - Electromagnetic compatibility - Railway vehicles EN61373:2010 - Equipment for railway vehicles - Shock and vibration testing EN50125-1 - Environmental conditions for equipment - Equipment on railway vehicles EN45545-2 - Fire behavior requirements for materials used in railway vehicles EN50306 - Cables for railway vehicles with special fire resistance performance

• Other measuring instruments

● Temperature and humidity transmitter suitable for calibration in the pharmaceutical field ● Probe can be detached from the housing ● Housing material can be selected from polycarbonate/metal ● Wall-mounted/rail-mounted (DIN EN 50022) ■ The EE220 is a temperature and humidity transmitter with a detachable housing and probe. ■ In the FDA (Food and Drug Administration) regulatory field, on-site calibration may be required, and the EE220 can accommodate this with two types of probes. By using an extension cable, the EE07 probe can be connected to the calibrator without removing it from the EE220 main unit.

• Other measuring instruments

● Successor model of the laser moisture meter Model 4010BR ● World's smallest compact wavelength-variable diode laser moisture meter ● Capable of measurement even with trace amounts of ammonia gas present ● Explosion-proof class Class I, Div I, Group B, C, D ● Equipped with data logger and sampling system ● Measurement at PPM levels ● Measurement time is within just 2 seconds (90% response) ■ Model 4010LX is suitable for moisture measurement under conditions requiring explosion-proof functionality, primarily in natural gas and petrochemical applications. Gas molecules such as saturated water vapor, oxygen, and hydrogen contained in process gas have the property of absorbing near-infrared light. The wavelength range at which gas molecules absorb near-infrared light varies depending on the type of gas, and by precisely measuring the wavelength range absorbed by saturated water vapor using TDLAS, it is possible to accurately measure the amount of saturated water vapor without being affected by other gas molecules. Additionally, the design has been revised to address the issues of high cost and the need for large installation space that were problems with conventional laser absorption spectroscopy, achieving miniaturization and lower prices. *For more details, please refer to the PDF document or feel free to contact us.*

• Other measuring instruments

● Condensation prevention through sensor heating function ● CO2 measurement principle: dual-wavelength non-dispersive infrared method (NDIR), with automatic calibration function ● Measures CO2, relative humidity (RH), temperature, and pressure (p) ● Analog output or BACnet MS/TP or Modbus RTU ● Maximum CO2 measurement range of 5% (50,000 ppm) ■ The EE872 is equipped with a heating function, demonstrating high reliability even in harsh and condensation-prone environments. With an IP65 housing and replaceable filters, it offers excellent protection in contaminated environments. If you select the H2O2 catalytic filter, it can also be used for applications that involve sterilization with H2O2. ■ The automatic calibration function enables accurate CO2 measurements regardless of temperature, altitude, or weather conditions.

• Other measuring instruments

● Protection of the delicate sensor part by a filter ● Maintenance of appropriate flow rate ● A simple and most reliable sampling system ● Available with a pump for applications requiring negative pressure or suction (B) ■ Even without deep expertise in dew point measurement, you can easily start dew point measurement by introducing a starter kit and simply connecting the piping. The standard piping size is 6mm, with an optional size of 1/4 inch. ■ There is also a starter kit APM that combines the dew point meters TK-100TR or TE-660TR with sampling equipment in one box. For more details, please download the catalog or contact us.

• Other measuring instruments
• Other analytical equipment

● For outdoor and weather-related applications ● Displays conversion values for temperature, humidity, dew point, frost point, and specific enthalpy ● Optional radiation shield can be installed ● HCT01 sensor element is robust against harsh environments such as pollutants ■ EE210 OUTDOOR The EE210 Outdoor temperature and humidity transmitter is suitable for outdoor applications. In addition to high-precision temperature and humidity measurements, it can also display conversion values for dew point, frost point, and specific enthalpy. The optional HA010501 radiation shield can be installed on walls and other surfaces. The radiation shield shortens response time due to the effects of natural ventilation and protects the sensing probe from solar radiation and rainfall. For more details, please download the catalog or contact us.

• Other measuring instruments

We offer a range of explosion-proof measuring instruments, including explosion-proof dew point meters. If you are having trouble measuring moisture or oxygen, please feel free to consult us. 【Product Lineup】 ■ Explosion-proof Dew Point Meter - Explosion-proof Dew Point Transmitter 'TK-100TR-EX' A dew point meter certified for explosion-proof use in Japan (TIIS). ■ Temperature and Humidity / Moisture Meter in Oil - Temperature and Humidity Dew Point Transmitter 'EE300Ex-HT' A product certified for intrinsic safety explosion-proof use in Japan, measuring temperature, humidity, and moisture in oil. ■ Oxygen Concentration Meter - Galvanic Explosion-proof Installed Oxygen Concentration Meter '210BX/2010BX' (Certified overseas by IEC/CSA, application for domestic certification in progress) For measuring oxygen in conditions requiring explosion-proof products, in % and ppm. - Inert Gas Control System (ICS) 'Oxytron 2000/Mini-ICS' Certified for explosion-proof use in Japan, for monitoring oxygen concentration and controlling the flow rate of inert gases. ■ Hydrogen Sulfide Meter - Explosion-proof Trace Hydrogen Sulfide Analysis System '3010BX' Certified for explosion-proof use in Japan (application in progress), capable of measuring 0 to 2,000 ppm. *Please feel free to contact us regarding measurement ranges and accuracy.

• Other measuring instruments

Techne Measurement Co., Ltd. goes beyond the framework of selling individual measuring instruments and devices, and strongly responds to customer requests for purchasing complete control panels. To achieve this, we aim to be an "Engineering Expert Company" and wish to contribute to our customers. We have compiled a collection of case studies featuring photos of custom-made measurement control panels we have manufactured in the past, along with their applications and main internal components. Please take a moment to read it from the "PDF Download." [Contents] ■ Dew Point Measurement Control Panel ■ Dew Point, Oxygen Concentration, and Hydrogen Concentration Measurement Control Panel ■ Explosion-Proof Oxygen Measurement Unit ■ Dew Point Measurement Panel ■ Explosion-Proof Oxygen Measurement Unit 　　　　　　　　　　　　　　　　etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

● Domestic development, domestic manufacturing, domestic calibration ● Obtained Japan domestic explosion-proof (TIIS) certification ● Dew point measurement range of -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● High response speed ● Competitive pricing system ● Short delivery time ● Comprehensive support system ● Traceability to national standards ■ The TK-100 explosion-proof dew point transmitter is a capacitive dew point meter developed with the measurement of moisture in gases in explosive hazardous areas in mind. This device forms an intrinsically safe explosion-proof system in combination with an insulation barrier, allowing for use in specially hazardous locations (formerly classified as Type 0 locations). The insulation barrier is installed in a non-hazardous area, and power supply to the transmitter is also provided from a non-hazardous area. For further details, please download the catalog or contact us.

• Other measuring instruments

● Compact shape convenient for portability ● High response speed ● Automatic calibration function ● Dew point measurement from -60 to +20 ℃dp ● Moisture meter in gases ● Automatic calibration (chemical purge function) ■ The TE-660HD is a handheld dew point meter that combines the TE-660 dew point transmitter and the TKN-MH1 monitor. It displays the dew point on the monitor, making it suitable for spot checks. ■ To pursue compactness and low cost, it is specialized for dew point measurement and does not include functions such as logging. For more details, please download the catalog or contact us.

• Other measuring instruments

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Other measuring instruments

● Weight 2kg, smaller than A4 size when laid flat (including handle) ● Developed and manufactured domestically ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Comprehensive support system ● Powered by 4 AA batteries or AC adapter The portable dew point meter TK-100 YN model is equipped with the capacitive dew point meter TK-100 transmitter, weighing only 2kg and smaller than A4 size when laid flat, making it lightweight and compact for easy transport. This allows for unrestricted usage locations and enables dew point measurement in various situations. For more details, please download the catalog or contact us.

• Other measuring instruments

● High response speed ● Automatic calibration function ● Measurement values can be selected from dew point, frost point, or ppm ● Output is either analog output 4-20mA or digital output Modbus RTU ● Automatic calibration (chemical purge function) ■ The polymer-type dew point meter TE-660 can measure low dew point ranges down to -60 ℃dpp, making it suitable for applications such as dew point management of compressed air and management of dry environments like plastic dryers. It features an automatic calibration function, allowing for accurate measurements with high response speed. ■ By using the optional USB-RS485 converter and the free downloadable configuration software, you can perform sensor calibration, set Modbus parameters, and change the range of the analog output. ■ When combined with the optional monitor (model: TK-100MS), it can be used as an online dew point meter (model: TE-660ON). For more details, please download the catalog or contact us.

• Other measuring instruments

● Mirror cooling type dew point meter ● Proven track record as a national standard instrument worldwide ● Dew point and frost point highest accuracy ±0.1 ℃ ● High response speed ● Precise and stable measurement of high dew point and low dew point ■ The Model 373 series manufactured by Swiss MBW is widely adopted as a national standard instrument in various countries. 【Main institutions adopting MBW as a national standard instrument】 U.S. NIST U.K. NPL Germany PTB NMIJ (National Metrology Institute of Japan) Spain INTA France CETIAT Switzerland METAS Italy INRIM Finland CMA Netherlands NMI Singapore SPRING Many others ■ The Model 373 series includes multiple models. Please select a model based on the dew point range you wish to measure. Model selection examples: 【Low dew point range up to -95℃】→ MBW 373LX 【High dew point range up to +95℃】→ MBW 373H 【Wide range from -70℃ to +95℃】→ MBW 373LHX There are several other models available. For more details, please contact us or refer to the catalog.

• Other measuring instruments

● Dew point measurement range: -60 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only MBW973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measuring instruments

We are pleased to present a dew point meter selection guide that clearly explains the basics of selecting dew point meters, the principles of dew point meters, and examples of selection based on dew point range and accuracy, using graphs and photos. Please take a moment to read it by downloading the PDF. 【Contents】 ■ Basics of Dew Point Meter Selection ■ Principles of Dew Point Meters ■ Examples of Selection Based on Dew Point Range and Accuracy ■ Introduction to Dew Point Meters Additionally, our company offers a variety of dew point meters, including the 'TK-100 Online Dew Point Meter,' and we can recommend a dew point meter that suits your needs and usage. *For more details, please refer to the PDF document or feel free to contact us.

• Other analytical equipment

● Temperature measurement range up to 180℃ ● Maximum pressure 2MPa ● Measurement possible with water activity (aw) / moisture content (ppm) ● 3.5-inch TFT color display (optional) ● Equipped with data logging function ■ The EE360 is a high-precision moisture meter for oil that measures water activity (aw) and temperature, and can also calculate ppm. Measuring moisture in oil helps diagnose contamination and degradation of the oil, ensuring that the timing for oil replacement is not missed. The probe can be used in environments with a maximum temperature of 180℃ and a maximum pressure of 2MPa, and you can choose between ISO parallel threads or NPT threads for positioning. If you select the optional ball valve, the probe can be attached and detached without stopping the process. The housing is designed for easy installation and maintenance, and can be selected from IP65 polycarbonate or stainless steel. For more details, please download the catalog or contact us.

• Other measuring instruments

● Measurement of water activity value (aw) and oil temperature (°C) to calculate water content (ppm) ● TFT touchscreen ● 10 types of oil parameter settings available ● Data logging function (approximately 2 million points) ● One-point or two-point calibration with a simple calibration kit (optional) ■ TEKHNEport-Oil measures the water activity value (aw) and oil temperature (°C) in oil, allowing for the calculation of water content (ppm). It can store parameters for 10 different types of oil needed for conversion, enabling the management of multiple types of oil with a single unit. Using these parameters, more accurate measurements of water content in oil can be achieved. Measuring water content in oil is useful for diagnosing oil contamination and degradation, ensuring that the timing for oil replacement is not missed.

• Other measuring instruments

● Gas explosion-proof/dust explosion-proof certification for installation in Zone 0 Div. 1 (based on certification) ● Conversion to related physical quantities ● Stainless steel housing and stainless steel probe ● Capable of measuring temperatures from -40 to 180 °C ● Maximum pressure 2 MPa ■ The EE300Ex-M1 is developed for measuring humidity (RH) and temperature (T) in explosive hazardous areas. In addition to Japan TIIS certification, it has obtained explosion-proof certifications from Europe (ATEX), international (IECEx), South Korea (KCs), and North America (FM). The EE300Ex can be used for flammable gas and dust applications. ■ It is also possible to customize the set values using the included configuration software outside of the explosion-proof area. This includes settings for analog output, temperature and humidity calibration, etc. ■ In addition to measurements in gas, it has also obtained intrinsic safety explosion-proof certification from Europe (ATEX) and international (IECEx) for measuring moisture content in oil (absolute moisture content in ppm) and relative moisture activity values. For further details, please download the catalog or contact us.

• Other measuring instruments

● Relative humidity measurement and temperature measurement ● Calculation of dew point, absolute humidity, and mixing ratio is also possible ● Available in wall-mounted, duct insertion, and remote probe types ● Alarm output 2 channels (standard) ● Digital output Modbus RTU/Modbus TCP (optional) ● Environmental resistance IP65 The high-precision, high-functionality temperature and humidity dew point transmitter EE310 is a hygrometer for industrial applications. The probe can be adapted to the customer's environment, supporting high-temperature environments with a maximum temperature range of 180°C and medium-pressure environments with a maximum pressure of 2 MPa. Probe selection examples: 【Wall-mounted type】→T1 【Duct-mounted type】→T2 【Remote probe type medium pressure (temperature: -40°C to 180°C, pressure: atmospheric pressure)】→T5 【Remote probe type high temperature (temperature: -40°C to 180°C, pressure: 1 kPa to 2 MPa)】→T10 【Remote probe type for temperature measurement Φ6 mm】→T24 For more details, please download the catalog or contact us.

• Other measuring instruments

● Probes can be selected according to the purpose ● 11 types of probes for measuring temperature and humidity, wind speed, and CO2 ● Data logging function ● Up to 2 million data points can be stored in internal memory ● Free data management software ● The CO2 probe is equipped with an optical sensor recommended by the Ministry of Economy, Trade and Industry, with an automatic correction function. ■ TEKHNEPort is a rugged handheld unit equipped with multifunctionality. It allows for the selection of probes that can be used according to the application, making it suitable for various purposes. It can be operated via a touchscreen, and the TFT LCD can display measurement values in up to three units. A total of 23 measurement units are available, including the following (available measurement units vary by probe): - Relative Humidity RH - Temperature T - Dew Point Td - Absolute Humidity dv - Mixing Ratio r - Wind Speed v - Volumetric Flow Rate V̇ - Atmospheric Pressure p - CO2 ppm For more details, please contact us or refer to the catalog. #Thermometer and Hygrometer

• Other measuring instruments

● High response speed with dry chamber ● Easy connection (just connect the piping to the main unit) ● Developed and manufactured domestically ● Accuracy ±2 ℃dp ● Powered by 4 AA batteries or AC adapter The portable dew point meter model TK-100NK-1 is equipped with the capacitive dew point meter transmitter TK-100. It features a dry chamber system that keeps the dew point sensor detection part in a desiccant when not measuring, which particularly enhances the response speed on the low moisture side (dew point below -50℃). You can easily start dew point measurement by simply connecting the piping to the main unit and turning on the power. In emergencies, AA batteries can also be used. For more details, please download the catalog or contact us.

• Other measuring instruments

● Measurement at % and PPM levels ● Galvanic battery-type sensor resistant to combustible gases and organic solvents ● Unique patented sensor with high response speed, long lifespan, and disposable design ● Standard equipment includes sampling system and solenoid valve ● Real-time data management via computer ● Data logging function ■ Model 2001RS is an oxygen analyzer capable of measuring from 0 to 10,000 ppm. Model 201RS is an oxygen analyzer capable of measuring from 0.1% to 25%. ■ All operations, including setting the output range, configuring two alarm points, and changing the span during calibration, can be performed from the front panel without removing the oxygen meter from the panel. Additionally, the sensor is designed as a disposable cartridge, allowing for easy manual replacement from the front panel. For more details, please download the catalog or contact us.

• Other analytical equipment

● PPM level measurement ● High response speed and long lifespan. Disposable proprietary patented sensor ● Realization of miniaturization - new book size, 2.2 kg ● Data logging function ● International intrinsic safety explosion-proof certification ■ This is a portable oxygen analyzer for PPM measurement that uses a galvanic battery (electrochemical type). ■ It is an ultra-compact portable device equipped with a data logger, needle valve, flow meter, and bypass line as standard in a new book-sized body. ■ The sensor is cartridge-type, so when replacing it, you can simply open the cap on the front panel and replace the cartridge to resume measurements. For more details, please download the catalog or contact us.

• Other analytical equipment

★This model has been discontinued. The successor model is the iTMA.★ ● Inline measurement of moisture in corrosive gases is possible ● Measurement range: 0-2500 ppm ● Maximum accuracy ±1% ● Available in rack mount, desktop, and portable options ● Measurable gases: Cl2, HCl, H2S, SF6, H2SO4, SO2, HBr, CO2, Ar, N2, H2, He, D2, O2, C2H2, hydrocarbons, PH3, refrigerants, etc. ■ The TMA series continuous moisture analyzer for corrosive gases utilizes the principle of phosphorus pentoxide (electrolytic) moisture analysis. It is available in desktop, 19” rack mount, and portable types. It also supports Japanese display. In addition to ppm display, simultaneous display of dew point is possible, and all settings such as measurement range, alarm settings, and data logging settings (optional) can be configured from the front of the unit.

• Other measuring instruments

● Intrinsically safe explosion-proof certified products (overseas IEC/CSA certified) ● Percent level measurement, 4 range arbitrary output settings available (Model 210BX) ● PPM level measurement, 7 range arbitrary output settings available (Model 2010BX) ● Equipped with data logger and sampling system ■ The Model 210BX/2010BX is an oxygen analyzer that allows all operations to be performed from the front panel without removing the main unit from the panel. ■ It is suitable for percent and PPM measurement under conditions requiring explosion-proof products, primarily in the natural gas and petrochemical sectors. ■ In the United States, it boasts a 95% market share in the natural gas and coal seam methane gas industry, with annual sales of 1,000 units. For more details, please download the catalog or contact us.

• Other analytical equipment

● Built-in sintered filter, flow sensor, and display ● Compact design with a weight of approximately 3.5 kg and a maximum width of 318 mm ● Automatic calibration function ● Stored in a sturdy resin case ■ The filter is equipped with an element with a pore diameter of 2 μm to remove debris. The flow rate can be adjusted using the adjustment valve on the front panel, and the confirmation of the proper flow rate is possible with a display lamp. A one-touch fitting is used for the gas IN port, and a quick fitting that allows for easy piping as needed is adopted for the OUT port, enabling measurement to start easily without tools. For more details, please download the catalog or contact us.

• Other measuring instruments

● The detection principle recommended by the Ministry of Economy, Trade and Industry is an optical sensor. ● Equipped with automatic CO2 calibration function (automatic correction function). ● High-precision measurement. ● Wall-mounted or portable tabletop placement. ● CO2 concentration displayed in color in stages from 0 to 5000 ppm. ● No maintenance required. ■ The CO2 Guard 10 accurately displays the surrounding carbon dioxide concentration as an indicator of indoor air quality (IAQ). By displaying CO2 levels with an LED, it helps determine the need for ventilation, such as opening windows. Proper ventilation and indoor air quality are very important for maintaining a healthy living and working environment. Maintaining good indoor air quality can reduce the risk of aerosol infections, such as the coronavirus, even in densely populated spaces. Additionally, ventilating based on CO2 levels can significantly reduce energy costs compared to irregular ventilation. For more details, please contact us or refer to the catalog.

• Other measuring instruments

★This model has been discontinued. The successor model is the Model4010LX.★ ● The world's smallest compact wavelength-variable diode laser moisture meter ● Explosion-proof class Class I, Div I, Group B, C, D ● Equipped with data logger and sampling system ● Measurement at PPM levels ● Measurement time is just under 2 seconds (90% response) ■ The Model4010BR is well-suited for moisture measurement under conditions requiring explosion-proof functionality, primarily in natural gas and petrochemical applications. Gas molecules such as saturated water vapor, oxygen, and hydrogen contained in process gas have the property of absorbing near-infrared light. The wavelength range at which gas molecules absorb near-infrared light varies by gas type, and by precisely measuring the wavelength range absorbed by saturated water vapor using TDLAS, it is possible to accurately measure the amount of saturated water vapor without being affected by other gas molecules. Additionally, we have re-evaluated the design concerning the issues of high cost and the need for large installation space that were present in conventional laser absorption spectroscopy, achieving miniaturization and lower prices. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other analytical equipment

To perform accurate moisture measurement, it is necessary to select appropriate piping materials and equipment. The installation location and method for dew point meters and monitors vary for each user. There are various requests, such as when there are limitations on installation space, when it is necessary to comply with factory-specific installation guidelines, or when there is a desire to use them in multiple locations. Our company can leverage years of experience to provide various suggestions during installation. We will inquire about the gas you wish to measure, its pressure and dew point level, and the surrounding atmosphere of the equipment to provide you with the optimal solution for moisture and oxygen management in the gas. For details regarding the installation of dew point meters, please refer to the URL below.

• Other measuring instruments

At Tekune Measurement, we conduct traceable calibrations of various measuring instruments in an environment optimized for calibration, with strict temperature and humidity control at our technical center within the headquarters. Traceable calibrations are divided into two types: 1) JCSS calibration in accordance with ISO/IEC17025 2) ISO9001 calibration in accordance with ISO9001. For dew point meters, we use a mirror-cooled dew point meter as the reference instrument and perform reliable calibrations using a high-precision humidity generator. Additionally, we have established a Class 1000 clean booth, allowing us to conduct calibrations in a clean environment as needed. *Class 1000 is a measure of cleanliness in clean booths, indicating that there are no more than 1000 particles per cubic foot. For more details on traceability, please visit the URL below.

• others

We position the entire process from proposal of solutions to delivery and post-sales support as "Total Support." At every stage, we strive to provide services that satisfy our customers in a "swift and accurate" manner. We believe that this will enable us to achieve our goal of having our customers use our products for a long time. For more details about Total Support, please visit the URL below.

• others

● Equipped with sensor heating function ● Suitable for high humidity and chemically contaminated environments ● Quickly recovers even during condensation ● Detection using HMC01 monolithic polymer cell ● Capable of measuring high temperatures up to 180°C and high pressures up to 10MPa The EE33 temperature and humidity dew point transmitter for high humidity and harsh environments is the top-of-the-line device for humidity and temperature measurement in the series. It can measure relative humidity, dew point, absolute humidity, and more with high responsiveness and reliability even under the most severe conditions. Successor model: HTS801 For more details, please download the catalog or contact us.

• Other measuring instruments

● Zero atmospheric release of SF6 gas ● Equipped with gas collection cylinder and pump-back function ● SO2 measurement available as an option ● Comes with a Pelican case ● SF6 gas recovery and reuse ■ The portable dew point and purity meter MBW973-SF6 for insulating gas SF6 is a high-precision dew point and SF6 measurement analyzer. It is equipped with a gas collection cylinder and pump-back function, allowing for easy and quick measurements without releasing SF6 gas into the atmosphere. For more details, please contact us or refer to the catalog.

• Other analytical equipment

● Dew point measurement range -30 to +99 ℃dp (depending on the model) ● Maximum accuracy for dew point and frost point ±0.1 ℃dp ● Measurement heads can be selected according to application ■ The MBW473 is a high-precision mirror-type dew point meter that allows for the selection of measurement probes based on application. Probe selection examples: 【Direct insertion type RP2】 Can be directly inserted into the chamber to be measured, such as a constant temperature and humidity chamber, eliminating installation hassle. 【Standard pipe installation type SH2】 The standard model of the MBW473 with a suction fan and inflow-type dew point measurement head. Suitable for various applications. 【Pipe installation dew point compatible type SHX】 High temperature and high dew point specification. Equipped with a suction fan, it is ideal for measurements inside high-temperature constant temperature chambers, etc. For more details, please contact us or refer to the catalog.

• Other measuring instruments

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor strong against combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer at PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement from the front panel. For more details, please download the catalog or contact us.

• Other measuring instruments

● Dew point measurement range: -60 to +95 ℃dp (depending on the model) ● Built-in heater (MBW573H/HX models) ● Compatible with DP3 (MBW573S) ■ The MBW573 allows for immediate measurement with its built-in pump, flow meter, pressure sensor, and heater (MBW573H/HX models). When measuring dew points above room temperature, heating of the piping is required, but the heating control can be set from the front panel. Customers can quickly and easily start dew point measurement by simply connecting tubing to the sample gas IN and OUT on the back of the device, without the need to prepare separate flow meters or pumps. Model selection examples: 【Low dew point range up to -60℃】→ MBW573S 【High dew point range up to +95℃】→ MBW573HX 【Medium dew point range from -30℃ to +70℃】→ MBW573H For more details, please contact us or refer to the catalog.

• Other measuring instruments

The sensor uses aluminum oxide as its material and detects and measures the electrical capacitance of water molecules. It has a higher sensitivity than polymer sensors and can detect trace amounts of moisture, but its response speed is inferior. It is commonly used in applications such as semiconductors, glove boxes, and battery manufacturing in environments with consistently low dew points. The measurement range is -100 °C dp to +20 °C dp. For more details on the principle of capacitive dew point meters (aluminum oxide), please refer to the URL below.

• others

Following the measurement control panels for heat treatment furnaces, a common application produced by Tekune Measurement is the measurement of dew point, oxygen concentration, hydrogen concentration, and other parameters in compressed air and various gases (such as nitrogen, argon, hydrogen, methane, etc.). In this application, since the pressure is usually positive, there is no need to address negative pressure with pumps; instead, it is necessary to manage positive pressure with regulators and similar devices. Additionally, depending on the gas, it may be necessary to address contamination and the liquefaction of volatile substances.

• Other measuring instruments

● Compact modular type analyzer, small and easy to integrate into equipment ● Large and bright LED, easy to operate ● Rich monitor interface RS232C, current, voltage, range voltage ● Not affected by hydrogen, methane, sulfur gas, carbon monoxide, carbon dioxide, etc. ■ MODEL 1100 is a galvanic cell type oxygen analyzer that can measure oxygen concentration at percent levels. It can be used in environments where flammable gases are present, making it suitable for applications ranging from research and development to industrial measurement. ■ It is a compact panel mount type, allowing for installation on a panel or use as a desktop unit. The oxygen concentration is easily readable on the 3/4 inch 4-digit LED, and various operations such as calibration can be easily performed using the three buttons on the surface. For more details, please download the catalog or contact us.

• Other measuring instruments

● Accurate measurement even at low wind speeds ● Measurement of wind speed and temperature ● Top-class H2O2 resistance due to protective coating ● Display of wind speed and sensor status with LED light ● Easy cleaning due to GMP-compliant design ● Straight or 90° right-angle probes of various lengths ■ The EE680 is a transmitter capable of high-precision measurement of wind speed and temperature under low wind speed conditions. The GMP-compliant design makes it ideal for clean rooms and safety cabinets in the pharmaceutical, life sciences, and microelectronics industries. For more details, please download the catalog or contact us.

• Anemometer

● Measurement and recording of temperature/humidity/dew point/CO2/atmospheric pressure ● Capable of logging up to 3,200,000 data points ● USB and Ethernet compatible ● 2 external analog inputs ● Four models to choose from based on application ● The CO2 sensor recommended by the Ministry of Economy, Trade and Industry operates on an optical detection principle ● Equipped with CO2 automatic calibration function (automatic correction function) ■ The HUMLOG20 data logger is a product that balances cost-effectiveness with multifunctionality and high precision, measuring and recording humidity, temperature, atmospheric pressure, and CO2 concentration. ■ THI model (standard specification) ... Measurement and recording of temperature and humidity/dew point THIP model ... Measurement and recording of temperature, humidity, dew point, and atmospheric pressure TCO model ... Measurement and recording of temperature, humidity, dew point, and CO2 E model ... Analog input from external sensors and digital input interface

• Other measuring instruments

● Can be installed in hazardous location Class 1 (Zone 1) ● Obtained domestic explosion-proof certification ● Sensors with excellent long-term stability ● Probes can be replaced without calibration (optional) ● Environmental resistance: IP65 The EE100Ex temperature and humidity dew point transmitter is developed for measuring humidity (RH) and temperature (T) in explosive hazardous areas. In addition to Japanese CSA certification up to Zone 1, it has also obtained explosion-proof certification from European (ATEX) and international (IECEx) standards. For more details, please download the catalog or contact us.

• Other measuring instruments

In addition to measurement and control panels for heat treatment furnace applications and compressed air and various gas applications, we also manufacture measurement and control panels for various other applications and their peripheral devices in-house. We can also accommodate measurement control panels that only contain measuring instruments other than those sold by our company, so please feel free to contact us.

• Other measuring instruments