イザワ List of Products and Services

Low elution and low autofluorescence adhesive tape that minimizes detection interference! Proven results in medical/analytical equipment applications! We offer 3M's "Microfluidic Diagnostic/Microplate Sealing Material," which has extremely low elution and significantly reduces the impact on samples. We provide a wide variety of materials with various characteristics, such as low autofluorescence and high transparency. 【Features】 ■ Hydrophilic treatment film - Improves the flowability of samples within the channel, contributing to reduced diagnostic time - Allows diagnosis with a small amount of sample ■ Spacer tape - Low elution, can be used in areas that come into contact with samples - Available in various thicknesses and colors to suit applications ■ Sealing tape - Low elution, can be used in areas that come into contact with samples - Low autofluorescence, suppresses interference with detection *Product catalog can be immediately accessed via "PDF Download." For any other inquiries, please feel free to contact us.

• Safety and consumables

The "3M Full Harness" is a fall arrest device that meets new standards while achieving a balance between safety and workability. 【Safety】 It features a structure (loop-type waist belt) that follows the movements during work, making it less likely to interfere with tasks, such as the belt becoming taut. 【Workability and Comfort】 In addition to a belt structure that does not hinder body movement, we also offer products with pads that distribute the load on the shoulders. In the event of a suspension, it has a structure (congestion prevention strap) that alleviates pressure on the groin area, reducing the risk of congestion. Furthermore, it employs a structure (pelvic support structure) that effectively distributes impact loads across the entire buttocks during a fall, reducing localized load concentration. *For more details, please download the PDF or contact us.

• Safety and consumables

At Izawa Co., Ltd., we offer 3M's "VHB Acrylic Foam Structural Adhesive Tape." It can also be used as an alternative or supplement to welding and screw fastening. 【Differences between Welding and VHB Acrylic Foam Structural Adhesive Tape】 　～Welding～ ・Extremely high bonding strength. ・Requires skilled technique for a clean weld. ・May cause distortion due to heat. ・Cannot be used in areas where open flames are prohibited. 　～Tape～ ・Easy adhesion for anyone. ・No impact on the substrate. ・Can be used in various locations. 【Differences between Screw Fastening and VHB Acrylic Foam Structural Adhesive Tape】 　～Screw Fastening～ ・Screws themselves are very inexpensive. ・Drilling is required. ・Stress concentrates on the screw holes, posing a risk of breakage. ・Exposed screws may reduce aesthetic appeal. ・Galvanic corrosion can occur when joining dissimilar metals. 　～Tape～ ・No drilling required. ・The tape itself absorbs stress, making it less likely to break. ・Not exposed on the surface. ・Prevents galvanic corrosion as metals do not touch (the tape is in between). *For more details, please refer to the PDF document or feel free to contact us.

• glue
• others

This product is a lightweight and unobtrusive retractable lanyard. The foldable shock absorber effectively absorbs impact during a fall. Some products feature hooks with a swivel loop to reduce twisting of the lanyard. Additionally, it has a compact design when not in use and extends during use, making it less intrusive during work. Even in the twin type, it is designed to be lightweight at approximately 1.2 kg, reducing the burden during work. 【Features】 ■ Shock absorption ■ Retractable web ■ Lightweight ■ Hook with swivel *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The product always maintains the lanyard length at its shortest, and during a fall stop, the locking function can suppress the fall distance. The folding shock absorber effectively absorbs the impact during a fall. It features a shock-resistant design that is less likely to be damaged by external impacts during use in harsh environments or during a fall. Additionally, we offer products such as the "3M Carabiner (for retractable lanyards)" and "Carabiner for retractable lanyards," as well as "Carabiner for twin retractable lanyards," which further reduce the risk of disengagement due to interference between lanyards. 【Features】 ■ Retractable function ■ Shock absorption ■ Hook with swivel ■ Locking function during a fall ■ High-durability retractor ■ High-strength webbing *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

This product is a fall arrest device that allows the D-ring on the chest belt to be connected to a vertical lifeline or safety block. When using a lanyard, it has a structure that allows the hook to be removed instantly. It also helps prevent falls when the rope gets caught on surrounding objects. Thanks to its unique adjustment feature, the belt length can be quickly adjusted by simply rotating the lever. Additionally, due to its retractable structure, there is no excess belt end. It is suitable for fall arrest measures during ladder ascent and descent. 【Features】 ■ Maximum allowable weight is 128 kg ■ Front D-ring ■ Easy release lanyard keeper ■ Rotating belt adjustment feature ■ Loop-type waist belt, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

This product is a fall arrest device that can also be used for work positioning. With a soft and sturdy pad, it stabilizes the body for comfortable work when used for work positioning. Additionally, it has a structure that does not strain the back when bending forward, and it supports the waist from two directions to stabilize posture during a fall. We also offer the "3M Protector Work Positioning Rope," which can secure the body during work. 【Features】 ■ Maximum allowable weight is 128 kg ■ Parachute-style belt adjustment function ■ Loop-type waist belt ■ Belt keeper ■ X-shaped back belt, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "3M Protector Full Harness Type H" is a fall arrest device that features side loops with a high degree of freedom for large leg movements and a sliding loop-type waist belt that adapts to various movements during work. It employs sewing technology that minimizes the propagation of damage even if some threads are cut, providing sufficient strength to withstand falling impacts. 【Features】 ■ Maximum allowable weight: 128 kg ■ Parachute-style belt adjustment function ■ Belt keeper ■ X-type back belt ■ Impact indicator, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

This product is a fall arrest device with a highly flexible structure that allows for significant movement of the thighs. During a fall, it effectively distributes the impact load across the entire buttocks, reducing localized load concentration. The equipped impact indicator has a structure that peels off upon impact, making it easy to identify harnesses with a fall history and preventing misuse. Additionally, the water-repellent treatment applied to the belt makes it resistant to mold and dirt accumulation. 【Features】 ■ Maximum allowable weight: 128 kg ■ Side loops ■ Can be used in conjunction with tool belts ■ Loop-type waist belt ■ Parachute-style belt adjustment function, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "3M DBI-SALA ExoFit Light Full Harness" features a model that can be quickly donned, fits the body well, and is easy to adjust. One of these models, the "Parachute Belt Adjuster Model," has a slim design that minimizes snagging on surrounding protrusions, allowing the belt to be tightened simply by pulling up from the top, making it a fall arrest device. It employs an X-shaped back belt that supports the waist from two directions during a fall, stabilizing posture, and does not restrict the back when bending forward. 【Features】 ■ Maximum allowable weight: 128 kg ■ Parachute-style belt adjustment function ■ Impact indicator ■ Flexible belt ■ Pelvic support structure, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "3M DBI-SALA ExoFit Light Full Harness" features a model that can be quickly donned, fits the body well, and is easy to adjust. One of its options, the "Rotating Belt Adjuster Model," allows for simple belt adjustments by just turning a lever, and due to its retractable structure, the belt ends do not hang loose, making it a fall arrest device. It has a design that allows for instant removal of the hook when using a lanyard. It also helps prevent falls when the rope gets caught on surrounding objects. 【Features】 ■ Maximum allowable weight: 128 kg ■ Rotating belt adjustment function ■ Easy release lanyard keeper ■ Quick connect buckle ■ Adjustable chest belt, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "3M Safety Walk Anti-Slip Tape Type LR" is an anti-slip tape that supports quick evacuation and guidance during sudden power outages with its glow-in-the-dark feature. When a flashlight is shone on it in the dark, the tape glows brightly due to the reflective material, allowing for better visibility of the ground and enhancing safety during movement. 【Features】 ■ Flat surface, indoor use ■ Supports quick evacuation and guidance with glow-in-the-dark feature ■ Tape glows brightly due to reflective material ■ Improves safety during movement by allowing visibility of the ground *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Spill Kit SRP-PETRO" is a box-type liquid absorbent material. It weighs only 2 kg. This handy kit can absorb approximately 15 liters of oil and organic solvents. We also offer a "Oil Spill Kit Refill Set." 【Specifications (SRP-PETRO)】 ■ Drum Size: W520mm × H310mm × D150mm ■ Contents ・ HP-156 × 5 sheets ・ T-4 × 3 bottles ・ Collection poly bag × 1 piece ・ Zip tie × 1 piece ・ Hazardous material label × 1 piece ■ Absorption Capacity: 15L/box ■ Weight: 2 kg *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Spill Kit JSK 12080P" is a drum-type liquid absorbent. It contains oil-absorbent materials that are oleophilic and hydrophobic, allowing it to respond to oil and organic solvent spills while absorbing very little water. The "JSK12080P" and "JSK6040P" come with a gas mask, chemical protective clothing, and goggles. 【Product Lineup】 ■JSK 12080P ■JSK 6040P ■JSK 3020P *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Maintenance Sorbent M-4/M-12" is a boom-type liquid absorbent. It can be used to prevent leaks around machinery and to contain spills when they occur. Additionally, it is suitable for use with water-soluble cutting oils. We offer two selectable sizes. 【Features】 ■ Prevents leaks around machinery and contains spills when they occur ■ Suitable for use with water-soluble cutting oils ■ Available in two selectable sizes *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Maintenance Sorbent M-30 (M-PL715)" is a pillow-type liquid absorbent material. Due to its thickness, it can be placed in areas where dripping of water-soluble cutting oil is anticipated, preventing the spread of oil. 【Specifications】 ■ Size: 177mm × 380mm ■ Weight: 170g per piece ■ Packaging: 16 pieces per box ■ Absorption capacity: 30L per box *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Maintenance Sorbent M-FL550DD" is a folded-type liquid absorbent material. This single box can accommodate various shapes of wipes and absorbents used on site. It can also absorb only water. 【Features】 ■ Type that absorbs both water and oil ■ Compatible with various shapes of wipes and absorbents ■ Can absorb only water *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Chemical Sorbent P-300" is a pillow-type liquid absorbent material. Due to its thickness, it can be placed in areas where liquid dripping is anticipated to prevent the spread of liquid. 【Specifications】 ■ Size: 177mm × 380mm ■ Weight: 170g per unit ■ Packaging: 16 units per box ■ Absorption capacity: 30L per box *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Chemical Sorbent P-200" is a boom-type liquid absorbent with a long length. It can be used for leak prevention around machinery and for preventing the spread during a leak. 【Specifications】 ■ Size: Diameter 76mm × Length 1200mm ■ Weight: 360g per unit ■ Packaging: 12 units per box ■ Absorption capacity: 47L per box *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Chemical Sorbent P-110" is a sheet-type liquid absorbent that is effective in preventing the leakage of liquid hazardous materials. It is soft, allowing it to adapt to various applications in different environments. 【Specifications】 ■ Size: 280mm × 330mm ■ Weight: 26g per sheet ■ Packaging: 50 sheets per box ■ Absorption capacity: 14L per box ■ Thickness: approximately 2.7mm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Chemical Sorbent C-FL550DD" is a folded-type liquid absorbent material. It absorbs acids, alkalis, oils, and water. This single box can accommodate various shapes of rags and absorbent materials for your worksite. 【Specifications】 ■ Size: 127mm × 15.2m ■ Weight: 1600g/roll ■ Packaging: 1 roll/box ■ Absorption capacity: 38L/box ■ Thickness: Approximately 12.6mm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent T-210" is a chip-type liquid absorbent material. It easily fits into small gaps and is suitable for oil absorption on uneven floors and concrete. It also has elasticity, making it usable as cushioning material during the transportation of hazardous materials related to oil. 【Specifications】 ■ Weight: 11,000g/bag ■ Packaging: 1 bag ■ Absorption capacity: 120L/bag *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent T-30" is a pillow-type liquid absorbent material. Due to its thickness, it can be placed in areas where oil drips are anticipated to prevent the spread of oil. 【Specifications】 ■ Size: 177mm × 380mm ■ Weight: 170g/piece ■ Packaging: 16 pieces/box ■ Absorption capacity: 30L/box *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Absorbent T-4" is a standard type of liquid absorbent material. It is a long boom type used for leak prevention around machinery and for preventing the spread during leaks. 【Specifications】 ■ Size: Diameter 76mm × Length 1200mm ■ Weight: 360g per unit ■ Packaging: 12 units per box ■ Absorption capacity: 47L per roll *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent T-100J" is a roll-type liquid absorbent material. By laying it down in areas with little foot traffic or under machinery, it allows for easier preparation and cleanup compared to using rags or sheets, thereby improving work efficiency. 【Specifications】 ■ Size: 965mm × 20m ■ Weight: 7800g/roll ■ Packaging: 1 roll/bag ■ Absorption capacity: 102L/roll ■ Thickness: Approximately 5.6mm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent T-151J/T-156J" is a sheet-type liquid absorbent material. It is suitable for use in oil-water separation layers and for wiping up spilled oil on factory floors, as it does not easily sink in water even when it absorbs oil. You can choose from two types with different thicknesses to match your work environment. 【Features】 ■ Standard type ■ Does not easily sink in water even when it absorbs oil ■ Ideal for use in oil-water separation layers and for wiping up spilled oil on factory floors ■ Available in two types with different thicknesses *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent HP-100" is a roll-type liquid absorbent material. Due to its length, it can be laid out in areas with little foot traffic or around large machinery, making preparation and cleanup easy and improving work efficiency. It has a laminated finish on one side. 【Specifications】 ■ Size: 965mm × 43.9mm ■ Weight: 9100g/roll ■ Packaging: 1 roll/bag ■ Absorption capacity: 218L/bag ■ Thickness: approximately 4.5mm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent HP-556" is a sheet-type liquid absorbent that has been treated for static electricity prevention. It is suitable for absorbing highly flammable liquids such as gasoline in low humidity and dry environments. 【Specifications】 ■ Size: 430mm × 480mm ■ Weight: 45g/roll ■ Packaging: 100 sheets/box ■ Absorption capacity: 108L/box ■ Thickness: Approximately 4.5mm *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Absorbent HP-156/HP-255" is a sheet-type liquid absorbent material. It has a laminated finish on one side, making it soft and resistant to tearing, which makes it suitable for oil-water separation layers and for wiping up spilled oil on factory floors. You can choose from two types with different thicknesses. 【Features】 ■ One-sided lamination ■ Soft and tear-resistant ■ Available in two thickness options *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Oil Sorbent P-FL550DD" is a folded-type liquid absorbent material. This single box can accommodate various shapes of wipes and absorbents used on-site. The high-performance type utilizing 3M's Microband technology boasts an absorption capacity of about twice that of the standard type and approximately 20 times its own weight. It has been laminated on one side to enhance strength. 【Features】 ■ Type that absorbs only oil ■ Compatible with various shapes of wipes and absorbents ■ Absorption capacity of about 20 times its own weight ■ One side laminated *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "High Flexibility Type (Polyether-based Urethane)" is a sheet suitable for punching processing that is ideal for adhesion to plastics. It is made of high-flexibility polyurethane foam coated with an acrylic adhesive. It can be used as a non-slip material, cushioning material, and also as a packing. 【Features】 ■ Suitable for adhesion to plastics ■ Made of high-flexibility polyurethane foam coated with an acrylic adhesive ■ Can be used as a non-slip material, cushioning material, and also as a packing *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Clear Type (Polyester-based Urethane)" is a die-cutting sheet coated with an acrylic adhesive that excels in shear adhesion, made from highly elastic polyurethane. It can be die-cut into circles, squares, or other necessary shapes and can be directly attached for use as a non-slip surface, rubber feet, or cushioning material. [Features] ■ Can be die-cut into the required shape and directly attached for use as a non-slip surface, rubber feet, or cushioning material. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

The "Colored Type (Polyether-based Urethane)" is a punched processing sheet coated with a rubber-based adhesive or an acrylic-based adhesive that excels in shear adhesion, applied to elastic polyurethane. It can be punched into circles, squares, or other necessary shapes and can be directly installed for use as anti-slip, rubber feet, or cushioning material. Additionally, a PVC-free type is also available. 【Features】 ■ Can be punched into the required shape and directly installed for use as anti-slip, rubber feet, or cushioning material. *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

The "Colored Type (Polyether-based Urethane)" is a molded product coated with a rubber-based pressure-sensitive adhesive that has excellent shear adhesion to a highly elastic colored polyurethane. Silicone-based adhesives exhibit excellent adhesion to surfaces that are difficult to bond, such as UV-coated surfaces. The lineup includes various shapes, sizes, and three colors: white, black, and gray. Additionally, there is a type with an embossed surface that is less likely to adhere to the bonded surface. 【Features】 ■ Coated with a rubber-based pressure-sensitive adhesive that has excellent shear adhesion to colored polyurethane ■ Exhibits excellent adhesion to UV-coated surfaces and others *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Clear Type (Polyester-based Urethane)" is a molded product coated with elastic, transparent urethane and acrylic or silicone-based pressure-sensitive adhesives. It exhibits excellent adhesion to surfaces that are difficult to bond, such as UV-coated surfaces. We offer a lineup that includes "types with embossed surfaces that are less likely to adhere" and "colored types mixed with color powders." 【Features】 ■ Coated with transparent urethane and acrylic-based pressure-sensitive adhesives ■ Exhibits excellent adhesion to UV-coated surfaces and more *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

At Izawa Co., Ltd., we handle components for microfluidic diagnostic devices manufactured by 3M, as well as products related to microplate sealing tapes. The company offers customized microchannels for microfluidic diagnostic devices, utilizing adhesives with minimal impact on samples, hydrophilic treatment films, and high-definition surface technology. 【Features】 <Components for Microfluidic Diagnostic Devices> ■ Excellent processability with low elution components ■ Capable of forming channels that come into contact with samples ■ Usable in biosensors such as blood glucose diagnostic chips and blood test cards <Microplate Sealing Tapes> ■ Developed for the purpose of laminating and sealing microplates ■ Provides a range of products that combine characteristics such as high transparency, chemical inertness, low autofluorescence, and low tackiness based on adhesives with minimal impact on samples ■ Usable for sealing channels in microfluidic diagnostic devices, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

We offer a wide range of "3M Aerosol Adhesives," including "Spray Adhesive 55," which allows for soft adhesion that can be applied, removed, and reapplied; "Spray Adhesive 77," which adheres firmly without wrinkling even on thin materials; and "Spray Adhesive 88," which has a very soft adhesive layer even after drying. Please choose according to your application. 【Product Lineup】 ■ Spray Adhesive 55 ■ Spray Adhesive 77 ■ Spray Adhesive 88 ■ Spray Adhesive 99 ■ Spray Adhesive 111 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

This product is an adhesive for application at 200°C. We offer a wide range of options suitable for bonding soft woods such as particle board and plywood, as well as for temporarily fixing other materials, starting with "3738." We also have "7399" and "3748V0," which are ideal for bonding polyethylene and polypropylene, allowing you to choose according to your needs. 【Lineup (excerpt)】 ■3738 ■3747 ■3748 ■3762 ■3764, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

This product is a hot melt adhesive system that melts adhesive with a dedicated applicator using heat and applies it. It features high-speed adhesion and is solvent-free, effectively streamlining adhesive work and improving the working environment. We offer a wide range of adhesives, from general-purpose types for cardboard to those for difficult-to-bond materials like polyolefins. 【Product Lineup (Partial)】 <Hot Melt Type> ■ Hot Melt Applicator TC ■ Hot Melt Applicator TCQ ■ Hot Melt Applicator PGII ■ Hot Melt Applicator AEII *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

The product is a high heat-resistant, high-performance water-based adhesive. Since it uses water as a solvent, it does not produce toxic gases and is also non-flammable. 3M's water-based adhesives are used in various fields such as automotive, electronics, construction, and general industry. Additionally, we offer "industrial adhesives" that have excellent adhesion properties, durability, and sprayability. 【Product Lineup】 ■3M Water-Based Adhesive AC1200 ■3M Water-Based Adhesive SP-7533 ■3M Water-Based Adhesive JA-7562 ■3M Water-Based Adhesive FT1000NF ■3M Water-Based Adhesive for Polyolefins PP1000 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

The "3M Polyurethane Adhesive and Sealant" is a refillable type, making it a cost-effective non-structural adhesive. It is easy to handle as you simply insert the sausage pack into a dedicated gun and push it out. Cartridges can sometimes cause the adhesive to harden due to moisture intrusion, but the sausage pack has high airtightness, ensuring long-lasting quality. As the material is extruded, the bag is compressed, so there is no bulky waste. We also offer the "3M Hybrid Adhesive and Sealant." 【Lineup】 ■540 ■740 ■560 ■760 ■590 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

The "3M Scotch-Weld Anaerobic Adhesive Series" is a liquid acrylic adhesive that begins polymerization when oxygen is blocked in the presence of metal ions. It is suitable for preventing loosening in vibration-prone areas. Additionally, we offer the instant adhesive "IG40/IG40H," which can strongly bond not only common materials but also EPDM, which has been difficult to bond in the past. 【Lineup (partial)】 ■TL22J ■TL42J ■TL43J ■TL71J ■TL62J, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

"3M Scotch-Weld Moisture-Curing Hot Melt" is an adhesive that, like general hot melt adhesives, is applied by heating and cures through self-crosslinking with moisture in the air after application. It combines the fast bonding characteristics of hot melt adhesives with the excellent adhesion and durability of reactive adhesives. It adheres strongly to glass, metal, and polystyrene. Both hand gun type and pail can type are available. 【Features】 ■ Shortening of the bonding process is possible, just like with conventional hot melt adhesives ■ Exhibits excellent adhesion and high heat resistance ■ Can bond materials that are sensitive to heat without damage ■ Does not contain flammable solvents ■ Strongly adheres to glass, metal, and polystyrene ■ Available in hand gun type and pail can type *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

The "3M Scotch-Weld 1-Part Epoxy Adhesive" comes with the base and hardener pre-mixed, so there is no need for measuring or mixing. It cures by heating, demonstrating high adhesive strength and durability. It can be used for bonding structures as an alternative to welding or riveting. 【Product Lineup】 ■SW2214 ■IW2190 ■IW2460 ■IW2510 *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue

The "3M Scotch-Weld EPX Adhesive System" is a system that quantitatively mixes and dispenses a two-component adhesive. The main agent and hardener in cartridges are quantitatively mixed and dispensed using a dedicated handgun and nozzle. This eliminates the hassle of mixing two components and provides stable adhesion. 【Product Lineup (Excerpt)】 ■DP-100 Clear ■DP-100 Plus Clear ■DP-105 Clear ■DP-110 Clear ■DP-110 Gray, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• glue