Hoshin Co., Ltd. List of Products and Services

For small-scale excavation work such as sewer, gas, and electricity, "Aluminum Belly Support" is optimal. 【Features】 ○ Available in a wide variety of types and sizes, allowing you to choose according to your needs. ○ Equipped with a resin cap, preventing dirt and debris from entering and making it heavy. ○ When stacked, wires do not get caught, making storage easy. ○ Lightweight, significantly improving work efficiency. ○ Made of aluminum, which is resistant to rust. ≪For specifications and details, please refer to the URL below or contact us.≫

• Work tools
• Water Supply Facilities
• Piles, caissons, sheet piles

Soil Retention Materials "Belly Support Holder/Belly Support Bracket" allow for easy horizontal alignment and height adjustment, ensuring a secure and safe installation. By simply changing the belly support bracket, it can accommodate various sizes of belly supports. 【Features】 ○ Easy alignment of the belly support → Set the belly support at a position between 340mm and 2440mm (in 50mm increments) from the top of the sheet pile. ○ Compatible with various sizes of belly supports → Three types of brackets are available to match the width of the belly support. For more details, please contact us.

• Temporary Construction Materials

The "Aluminum Sheet Pile [HAY-3833N] Dedicated Extraction Tool (PAT)" is set in the extraction hole of the sheet pile, allowing for easy and quick removal during the extraction process, while protecting the tip of the sheet pile and the extraction hole. 【Features】 ○ Safe ○ Labor-saving For more details, please contact us.

• Work tools

The "Stainless Steel N-Type" water pressure manual pump is easy to maintain and highly durable. Please use it in connection with an aluminum hydraulic jack. 【Features】 ○ Easy to maintain and highly durable For more details, please contact us.

• Piping and insulation

The "Kan Sinkun Junior I/II" for measuring the pipe core and pipe bottom of water supply and drainage pipes can easily measure the pipe core and pipe bottom just by placing it on the pipes. Compared to methods using a plumb bob or a leveling tool, it allows for accurate measurements and can be completed at more than twice the speed. 【Features】 ○ Measures the pipe core and pipe bottom during the installation of water supply and drainage pipes ○ Easy for anyone to use ○ Made of durable, easy-to-hold aluminum that is resistant to rust For more details, please contact us.

• Water Supply Facilities
• Other measuring instruments

The special formwork "Metacon Frame" allows for the seamless connection of steel formwork and plywood using U-clips. It is ideal for use with plywood in sloped curved surfaces, infill sections, top slopes, and edge frames with steel formwork. 【Features】 ○ Seamless connection of steel formwork and plywood using U-clips. For more details, please contact us.

• Formwork material

By adopting a ratchet-type slider, it has become possible to significantly improve the work efficiency of extension and adjustment tasks on site. By changing the orientation of the holder, it can be used for corner batten, round batten, or flat pressing depending on the application. 【Features】 ○ Adoption of a ratchet-type slider greatly improves work efficiency for extension and adjustment on site ○ Adapter with swivel function ○ Compatible with corner batten, round batten, and flat pressing For more details, please contact us or download the catalog.

• Frame construction accessories

The water drainage pipe clog prevention device "Pipe Filter" demonstrates excellent drainage effectiveness due to its superior permeability and water collection capabilities. It also prevents sediment runoff with a permeable mat. It can be installed in sloped areas and irregular openings, making installation easy and hassle-free. Newly added is the "footed type," which can be secured with spring force to the water drainage holes with diagonal slits, further expanding its usability. 【Features】 ■ Excellent permeability and water collection, enhancing drainage effectiveness ■ Superior durability, maintaining stable performance ■ Prevents clogging while stopping sediment runoff ■ Orange color makes post-installation photo management easy *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Airport facilities
• River construction
• Drainage and water removal

The water drainage pipe fixing bracket "Pipe Holder" is extremely stable and does not come off during concrete pouring. It can be installed with the same standard products for VP pipes, VU pipes, and paper tubes. 【Features】 ○ Easy installation without worrying about the fixing angle ○ Excellent stability ○ Prevents deformation of the water drainage pipe (small diameter) ○ Compatible with VP pipes, VU pipes, and paper tubes ○ Durable and reusable For more details, please contact us or download the catalog.

• River construction
• Drainage and water removal
• Retaining wall

In the civil engineering industry, precise construction and durable materials are required to ensure the strength of structures. Particularly in stone masonry concrete work and block masonry work, the quality of the formwork significantly affects the accuracy and strength of the finished product. Traditional formwork can present challenges such as poor workability, difficulty in reuse, and the use of release agents. Our block extraction formwork, "Block Panel," addresses these issues and supports the construction of high-quality structures. [Application Scenarios] - Stone masonry concrete work - Block masonry work - Projects requiring extraction formwork [Benefits of Implementation] - Improved workability - Enhanced durability - Cost reduction through repeated use - Reduced environmental impact by eliminating the need for release agents

• Ceiling panels and decorative panels

In the construction industry, there is always a demand for shortening construction periods and reducing costs. Particularly in stone masonry concrete work and block masonry work, the efficiency of the removal and installation of formwork is a crucial factor. Traditional formwork has issues such as poor workability, difficulty in concrete release, and challenges in reuse. Our block extraction formwork, "Block Panel," was developed to address these issues and improve work efficiency. 【Usage Scenarios】 - Stone masonry concrete work - Block masonry work - Any site requiring extraction formwork 【Benefits of Implementation】 - Reduction in work time - Cost savings - Effective use of resources through formwork reuse

• Ceiling panels and decorative panels

This is a backing form made of thermoplastic resin polypropylene and glass fiber composite material, which excels in chemical resistance (alkali), impact resistance, and toughness, and is easy to work with, durable, and reusable. 【Applications】 It is ideal for pull forms in stone masonry concrete work and block masonry work. 【Features】 ○ Lightweight and highly elastic, can be used for curves. ○ Uses special resin, providing excellent concrete release properties. ○ After pulling, it can be easily cleaned with water and reused. ○ No release agent is necessary. ○ Recyclable. For more details, please contact us or download the catalog.

• Ceiling panels and decorative panels

The "Stopper" is a formwork support rod specifically designed for block masonry that significantly reduces the time required for the conventional back concrete removal formwork creation process. It maintains consistent dimensions and can reduce the number of personnel by about two. The removal formwork will not collapse. This product is suitable for supporting the removal formwork during block masonry and for determining the width of the back concrete. 【Features】 ■ Always maintains back concrete widths (10cm, 15cm, 20cm) ■ The removal formwork does not collapse ■ The formwork assembly work is completed instantly *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material

The asphalt joint repair material "Quick Seal (for crack repair)" is a product that can be directly applied to the pavement surface and easily adhered using a hand torch. By repairing cracks that occur early on, it can extend the lifespan of the pavement. 【Features】 - Ideal for repairing cracks that occur early on - Easily adheres with a hand torch - Suitable for various climatic conditions For more details, please contact us or download the catalog.

• Reinforcement and repair materials
• Safety and consumables
• Secondary paving products

Quick Stick can be easily used to bond pavement markers or to make small crack repairs. It can be applied anytime with just a burner. 【Features】 ○ For small crack repairs ○ As an adhesive for road markers ○ For asphalt and Portland cement pavements For more details, please contact us or download the catalog.

• Reinforcement and repair materials
• Safety and consumables
• Paving of sidewalks, roads, parking lots and stadiums

With four protruding rods, it can securely sandwich both sides of the sheet pile, providing stability and allowing for quick and easy installation work, while also protecting the tip of the sheet pile. It can also be used with lightweight steel sheet piles Type 1 and Type 2. *Please refrain from using heavy machinery such as backhoes for installation work, as this may deform or damage the tip of the sheet pile. *When using with sheet piles from other manufacturers, it may not be usable depending on the shape. 【Features】 ○ Safety ○ Labor-saving

• Work tools

The leveling work of the top surface of the foundation concrete can be done easily. The finish is beautiful, and high-precision construction can be performed. 【Features】 - Easy leveling work of the top surface of the foundation concrete - Beautiful finish and high-precision construction For more details, please contact us or download the catalog.

• Drainage and water removal

Compatible with all types of formwork, including steel foundation formwork and plywood formwork. After construction, the ear section can be easily folded. 【Features】 ○ Strength is improved compared to conventional products, allowing for safe use ○ Compatible with all steel foundation formwork and plywood formwork For more details, please contact us or download the catalog.

• Frame construction accessories

The wastewater pipe stop plug "Stop Ball" is used when temporary water stoppage is needed for maintenance work on wastewater drainage pipelines, cleaning and dredging inside the pipes after a disaster, various investigations, repairs, and construction work for drainage measures. It is available in sizes that accommodate pipe diameters from 75mm to 2400mm. The "Stop Ball" is easy to use; just inflate it with air. There is a wide range of options available, including a short type that is easy to handle and has a shorter overall length for various applications and pipe diameters, as well as a long type reinforced with high-quality Kevlar fibers that offers excellent elasticity, and a high-flow drainage type that is perfect for replacing water with large flow rates. Sewage systems play a crucial role in maintaining and securing a clean and comfortable living environment, as well as ensuring the water quality of public water bodies. However, with the increasing aging of sewage facilities in recent years, products like this are essential for maintenance work to prevent "road subsidence accidents" and "sewage leaks." *For more details, please contact us or refer to the catalog.*

• Dam construction
• Water Supply Facilities

The "Stop Water Ball Short Type" is a device that uses a stop water ball tailored to the pipe diameter, designed for temporary water stoppage during tasks such as cleaning, dredging, various inspections, tests, and repairs within the pipe. It expands by injecting air using a foot pump or compressor, creating a tight seal against the pipe's interior to stop the water flow. Additionally, the version with a bypass can be used for various tests such as pressure tests and water-tight tests, as well as for water replacement work. It is available in a total of 10 types: 5 sizes without a bypass and 5 sizes with a bypass, suitable for pipe diameters ranging from 75 to 300 mm. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities
• Sewerage facilities

The "Stop Water Ball Long Type" is reinforced with high-quality Kevlar fibers, offering excellent elasticity and compatibility with various pipe diameters. The bypass-free version can be bent up to 90° while deflated, making it suitable for installation in small-diameter manholes. The version with a bypass can be used for various tests such as pressure tests and water-tightness tests, as well as for water replacement work. It expands by injecting air using a foot pump or compressor, adhering tightly to the inside of the pipe to stop water flow. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities
• Sewerage facilities

The "Stop Water Ball Large Flow Drainage Type" is suitable for water replacement work that requires the passage of large flow drainage through a large bypass section. It is reinforced with high-quality Kevlar fibers, offering excellent elasticity and compatibility with various pipe diameters. Additionally, the drainage flange ring can be replaced according to the actual flow rate. The material is SBR synthetic rubber (styrene-butadiene rubber) reinforced with Kevlar fibers. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities
• Sewerage facilities

The steel simple scaffold FT scaffold is a type of scaffold with removable hooks, making it ideal for formwork dismantling and final inspection scaffolding. It can be directly attached to concrete structures. It can be installed at two points above and below using form ties and bolts, allowing for safer work. Additionally, the lower part has elongated holes, so the installation spacing can be freely set (450mm to 900mm pitch). The angle of inclination can be adjusted freely, and it can be used from a reverse 3-degree slope to about a 9-degree slope. By attaching a dedicated hook (sold separately), it can also be mounted on horizontal battens. For more details, please contact us.

• Work tools
• Scaffolding and Support Materials
• Frame construction accessories

The Stop Water Plug Cam Stopper CAM is compatible with work rods. It is suitable for high ceramic pipes, ceramic pipes, PVC pipes, ribbed pipes, fume pipes, cast iron pipes, and poly pipes. With its lever mechanism, it allows for quick one-touch attachment and detachment, reducing work time. By using a cam lock, it enables safe operation from a distance. Additionally, it features a function to drain water from the center section. We offer a lineup of 11 sizes starting from φ100 mm. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Work tools
• Manhole body

The Stop Water Plug Cam Stopper PRO is compatible with high ceramic pipes, ceramic pipes, PVC pipes, ribbed pipes, fume pipes, cast iron pipes, and poly pipes. It features a lever mechanism for quick one-touch attachment and detachment, which can reduce work time. The durability of the sealing rubber has been improved. Additionally, it includes a function to drain water from the center section. It can be customized to sizes up to φ1400mm upon request. For more details, please contact us.

• Sanitary fixtures
• Work tools

The sewer mirror allows for inspection inside pipes without entering sewers or manholes. It is easy to adjust the length, and the mirror angle can be adjusted to over 90°. Additionally, the pole is made of aluminum, making it lightweight, compact, and convenient for transport. The Mirror Type I has a mirror diameter of 80×130mm, a pole length of 600–1000mm (2 sections), and weighs 330g. The Mirror Type II has a mirror diameter of 125×170mm, a pole length of 900–2500mm (3 sections), and weighs 660g. Both types come with a cover. For more details, please contact us.

• Work tools

SP Mortar for shaping, filling, and repairing concrete structures is a premixed mortar that can be used simply by mixing with water, eliminating the need for sand and cement. It is ideal for patching repairs, crack repairs, chip repairs, and more. It can be used in a wide range of fields, including civil engineering, construction, equipment, and plumbing, and it also performs well for repairing concrete precast products. Additionally, it can be shaped and formed with tools such as trowels, spatulas, and cutters until fully cured. It has excellent adhesion and waterproofing properties. For more details, please contact us or refer to the catalog.

• Work tools
• Waterproofing work
• Plastering and painting work

The S-type/V-type manhole cover caps are the definitive solution for drainage cover caps that combine safety and aesthetics. A new lineup made of aluminum has also been added. These caps can seal the handle holes of drainage covers in residential areas, stores, and factories, preventing accidents from falling objects and during passage. The clip part uses spring steel (SUS), which firmly secures the cover with the spring's rebound and the protrusions on the sides, eliminating any wobbling. The surface of the cap has a non-slip finish. Additionally, it has drainage holes to prevent water from accumulating around it. For more details, please contact us or refer to the catalog.

• Steel
• Safety and consumables
• Gutters and U-shaped gutters

Concrete sludge dissolving remover Concrete Clean is used for cleaning concrete sludge that has adhered to temporary equipment such as metal and resin. After applying the concentrated solution with a brush, wait for a while and then wash it with a high-pressure washer; using a metal brush or scraper will enhance the effect. This can shorten the time required for surface preparation work. When working, be sure to wear protective goggles, rubber gloves, and rubber protective clothing. For more details, please contact us or refer to the catalog.

• Work tools
• Safety and consumables

Asphalt Cleaner is a cleaning and removal agent for asphalt that has adhered to asphalt finishers and other equipment. It easily removes even strongly adhered asphalt. Spray the product in its concentrated form, let it sit for a few minutes, and then rinse with water. If the dirt is severe, brush it with a brush or similar tool. It can also be used on colored asphalt. When working, be sure to wear protective goggles, rubber gloves, and rubber protective clothing. For more details, please contact us or refer to the catalog.

• Work tools
• Safety and consumables

The pipe pallet for organizing, storing, and transporting single pipes is an easy-to-set-up, safe, and convenient pipe storage device that significantly streamlines the organization, storage, and transportation of single pipes. It allows for three-dimensional storage and takes up minimal space even on narrow construction sites. Additionally, it can be lifted with a strong hook, making it safe and efficient. For more details, please contact us.

• Work tools
• Safety and consumables
• Transport machinery

The auto level, which is active in a wide range of fields from leveling surveys to civil engineering and construction, is always required to provide precision and durability in harsh site environments. Topcon's auto levels are equipped with excellent environmental performance, shutting out rain and water intrusion. By combining a bright and visually appealing optical design with a quick and reliable automatic correction mechanism, they allow for rapid targeting with stable accuracy, enabling efficient work. With a rich lineup, they cater to various usage purposes and perform strongly in daily site operations. For more details, please contact us or refer to the catalog.

• Other measuring instruments

The Auto Level AS-2 and AS-2C are reliable auto levels that are completely waterproof, have a high magnification (34X), a minimum focusing distance of 90cm, and of course, are high precision, easy to use, and packed with high performance. They are ideal for precise measurements and can be used in a wide range of applications such as leveling, civil engineering, and construction. Both the AS-2 and AS-2S feature telescopes sealed with O-rings and sealants filled with nitrogen gas, ensuring complete sealing. You can use them with confidence even in rainy or humid conditions. For more details, please contact us or refer to the catalog.

• Other measuring instruments

The Auto Level AE-7 and AE-7C are fully waterproof auto levels that are ideal for use in narrow spaces such as construction sites, designed for short-distance applications. They offer stable accuracy and are high-performance auto levels that can be easily used in various settings. The minimum focusing distance of the telescope is just 20 cm, making them perfect not only for general leveling surveys but also for use in tight spaces like construction sites and interior work. They feature a one-axis coarse and fine focus adjustment system with two functions, allowing for quick and reliable focusing. For more details, please contact us or refer to the catalog.

• Waterproofing work
• Interior construction
• Other measuring instruments

The Auto Level AP-8, AC-2s, and AX-2s are equipped with a built-in automatic correction device using a magnetic damper system, allowing for stable and high-precision measurements even when subjected to external micro-vibrations or shocks. The shortest focusing distance is 75 cm (from the front of the objective lens), making it convenient for work in tight spaces. A reflective mirror is positioned at the top of the circular bubble tube, enabling you to check the position of the bubble while looking through the telescope. For more details, please contact us or refer to the catalog.

• Other measuring instruments

The LL500 has a working range with a diameter of 500m and can produce an automatically corrected laser reference plane. It can be easily set up on any site, allowing one person to perform surveying tasks that typically require two. Additionally, multiple receivers can be used to establish the reference plane. With its correction function for temperature changes, it can meet stringent accuracy requirements in all environmental conditions. For more details, please contact us or refer to the catalog.

• Other measuring instruments

Beam support is ideal for small-scale excavation work such as electricity, telephone, and gas.

• Work tools
• Water Supply Facilities

Tighten the screw to expand the rubber and stop the water flow. It is equipped with a function (cap) to discharge water. The stop water plug is ideal for pipe cleaning and repairs. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities

Sponge balls are ideal for cleaning tools in drainage pipes. Various sizes with diameters ranging from 100 to 350 mm are available. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities

We will perform internal cleaning using a rope attachment. We offer various sizes with a nominal diameter of 100 to 300 mm. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities

During drain cleaning, it is ideal for pipe cleaning tools such as pipe brushes and sponge balls. Tie a rope to the silver glass line and pull it in. Be sure to attach a calling rope to the rear of the sponge. The 7mm diameter comes with a side hole tip fitting, while the 11mm and 14mm diameters come with a snake head. For more details, please contact us or refer to the catalog.

• Sanitary fixtures
• Water Supply Facilities