メーコー List of Products and Services

"MK Dampate" is used in crackless joint treatment methods that suppress the occurrence of cracks at joint areas. The "thick application" type has less shrinkage among elastic putties, while the "thin application" type is a micro-elastic putty that balances the opposing elements of elasticity and grindability, making it suitable for polishing. For areas where cracks are anticipated, such as single-layer gypsum board or door openings, the occurrence of cracks is reduced compared to conventional methods. 【Features of the thin application type for interior use】 - A micro-elastic putty that balances the opposing elements of elasticity and grindability - Can be applied up to approximately 1.5mm thick - Environmentally friendly with zero VOC (below 0.1%) - Easy to polish with minimal dust dispersion, making it suitable for renovation sites *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

"MK Zero Con" is an internal synthetic resin emulsion putty that is ultra-lightweight (6.5 kg for 12L), making it easy to carry on-site. It combines excellent workability and thick application performance comparable to finishing putties. It can be applied up to 10 mm thick in one coat, and there is no concern about shrinkage with normal application thickness. Compared to conventional thick application putties, the particles are finer, making it less likely to produce edges when smoothing, resulting in a beautiful finish. 【Features】 ■ Formaldehyde emission rating: F☆☆☆☆ ■ Excellent workability and thick application performance ■ Less likely to produce edges when smoothing, resulting in a beautiful finish ■ No concern about shrinkage with normal application thickness (approximately 3 mm) ■ Ultra-lightweight putty (6.5 kg for 12L) *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

"MK Stain Stop" is an environmentally friendly water-based primer that takes into consideration both people and the environment. It works by encapsulating the components of resin and stains within the coating, preventing them from bleeding to the surface. Low VOC and low odor. The smell during painting is hardly noticeable, allowing for a comfortable environment to be maintained. [Features] ■ JIS Certification Number JP0306001 JIS K 5663 F☆☆☆☆ ■ Water-based, cationic special resin, quick-drying ■ Low VOC: less than 1% ■ Low odor: not noticeable ■ Non-polluting: water-based and safe *For more details, please refer to the PDF document or feel free to contact us.

• Other plastering finishing agents

"MK ECO Super Putty" is an internal synthetic resin emulsion putty that can be applied in thin layers up to 1.5mm (in one application). It is suitable for various substrates, including concrete, mortar, slate, ALC, cement-based materials, and gypsum board for internal substrate adjustments. With a special ultra-lightweight formulation, it is lightweight, making troweling work very easy. 【Features】 ■ JIS K 5669 General Type for Thin Application ■ Versatile Type: Can be applied in thin layers up to 1.5mm (in one application) ■ Ultra-lightweight: The special ultra-lightweight formulation makes it easy to work with ■ Suitable Substrates: Internal substrate adjustment materials such as concrete, mortar, and gypsum board ■ Capacity and Packaging: 12L (in a petroleum can) / 2.5L x 4 cans (in a cardboard box) *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

"MK Just Putty" is a lightweight substrate adjustment material made of synthetic resin emulsion, suitable for both internal use and medium to high application types. It has excellent trowel handling, filling properties, and sanding performance. Weighing only 13kg, it is easy to carry, while having nearly the same volume as the conventional 20kg putty. Additionally, it is a low-viscosity type that does not require water dilution or stirring, contributing to improved work efficiency, especially in large-scale and high-rise projects. 【Features】 ■ JIS K 5669 General thin application type ■ Adhesion: Good ■ Workability: Excellent trowel handling, filling properties, and sanding performance ■ Versatile type: Can accommodate a wide range from medium to high applications ■ Lightweight: Easy to carry at 13kg, nearly the same volume as the conventional 20kg putty *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

"MKIII Putty" is a synthetic resin emulsion putty for general thin application. It can cover medium and thick applications, allowing for a reduction in construction time. It is neither too hard nor too soft, resulting in a fine finish and excellent sanding feel. Both the knife cutting and stretchability are good, achieving ultimate workability. 【Features】 ■ JIS K 5669 for general thick application (F☆☆☆☆) ■ Both knife cutting and stretchability are good, achieving ultimate workability ■ Suitable for medium and thick applications ■ Fine finish and excellent sanding feel ■ Convenient 12L (13Kg) oil can for easy transport (direct fill) *For more details, please refer to the PDF materials or feel free to contact us.

• Joint material

This catalog introduces a list of "putty" handled by Meiko Co., Ltd. Since our establishment in 1941, we have been dedicated manufacturers of construction paints and materials, and our greatest mission has been to develop products in line with construction methods and to provide products that meet our customers' needs. In particular, our building substrate adjustment materials (putty, fillers, sealers) have been our main products and have earned the trust of our customers for many years. [Contents (excerpt)] ■ General thin application (for interior use) ■ General thick application (for interior use) ■ Water-resistant thin application (for interior and exterior use) ■ Water-resistant thick application (for interior and exterior use) ■ Special purpose products *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint
• Reinforcement and repair materials

"New Pindex" is a substrate adjustment agent for interior decoration. It prevents absorption even after top coating, further improving coverage and reducing noticeable absorption unevenness. Additionally, due to the effect of a thick coating film, it completely covers the fuzziness of the board surface. 【Features】 ■ No absorption even after top coating ■ Further improved coverage, reducing noticeable absorption unevenness ■ Moderate peaks conceal putty treatment marks ■ The effect of a thick coating film completely covers the fuzziness of the board surface *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

"Dancork Non-Bleed" is a sealing material made from acrylic and free of plasticizers. It is suitable for filling gaps, repairing cracks, and treating joints in ALC panels, as well as for internal and external wall surfaces and ceiling corners. Due to its excellent elasticity after curing, it follows the movement of components well, is easy to use because it is water-based, and poses no fire hazard or toxicity. 【Features】 ■ Rich in flexibility and stretchability, with excellent weather resistance ■ No bleeding on painted surfaces as it does not contain plasticizers ■ Easy to use due to being water-based, with no fire hazard or toxicity ■ Excellent elasticity after curing, allowing it to follow the movement of components well ■ Excellent extrudability from the tube *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• Exterior coating materials

"Speed 30" is a primer putty specifically designed for adjusting various interior substrates such as gypsum board, concrete, mortar, and ALC panels. It features finely ground particles, significantly reducing shrinkage, and achieves a feather-light trowel application. With an ultra-lightweight packaging (12 kg/box), it boasts the same coverage area as conventional putties (16-20 kg/box). 【Features】 ■ 30-minute working time type developed specifically for painting substrates ■ Finely ground particles that minimize shrinkage ■ Achieves a feather-light trowel application ■ Ultra-lightweight packaging with coverage area equivalent to conventional putties ■ Achieves a beautiful finish when used in conjunction with "bridge tape" *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

The "Konapate Silky II 60・120 Type" is a primer putty specifically designed for adjusting various interior substrates such as gypsum board, concrete, mortar, and ALC panels. This type has less shrinkage compared to conventional products, and the particles have become even finer. With an ultra-lightweight packaging (14kg/box), it boasts the same coverage area as conventional putties (16-20kg/box). 【Features】 ■ Finer particles ■ Less shrinkage compared to conventional products ■ Ultra-lightweight packaging with the same coverage area as conventional putties ■ Contains anti-mold agents ■ Putty color: cream *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

The "Konapate Silky 60・120 Type" is a primer putty specifically designed for adjusting various interior substrates such as gypsum board, concrete, mortar, and ALC panels. It has fine particles and minimal shrinkage, making the finishing of the top putty easy. When used in conjunction with "MK Bridge Tape," the seams of the putty become less noticeable. 【Features】 ■ Fine particles with minimal shrinkage ■ Easy finishing of the top putty ■ Good workability and trowel cutting ■ Excellent mold and rust resistance ■ Reduced visibility of putty seams when used with MK Bridge Tape *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

"Konapate V 60・120 type" is a reaction-curing powder filler. Pour clean water (approximately 500cc per 1kg of Konapate V) into a clean container, and while sprinkling "Meiko Konapate V" into it, knead for 2 to 3 minutes until the powder is no longer visible, forming a paste for use. If it is too hard or too soft, adjust by adding water or Meiko Konapate V as needed. For the top coat after curing, please use Meiko Paste (general thin coating or water-resistant thin coating). It cures quickly, allowing for a shortened construction period. [Features] - Contains antifungal agent - Reaction-curing powder filler - No cracking or shrinkage from thick application - Cures quickly, reducing construction time - Good adhesion with top paste (Meiko Paste) *For more details, please refer to the PDF materials or feel free to contact us.

• Interior coating materials
• paint

"Kurinna One Top Putty" is an internal synthetic resin emulsion putty for general thick and thin applications. It pursues the ideal workability with the smoothness of finishing putty and the firmness of thick putty. You can use it immediately after opening the can, and it is designed to be resistant to surface scratches, allowing for easy and smooth sanding. Leave everything from thick application to finishing to us. 【Features】 ■ Dual-purpose type ■ Convenience considering the job site ■ Excellent workability ■ Reliable filling properties ■ Suitable sanding properties ■ Compatibility with topcoats *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

"Kurinna Non-Paper Putty" is designed for general use (internal) with a thin application. It is suitable for substrates such as gypsum board, concrete, mortar, slate, and ALC. In the case of a painted finish, please use it as a top putty. The visibility of joints in the putty has been minimized, significantly improving workability. Additionally, in the case of plaster finishes, it can be used as both a base and top putty, and it will not result in uneven gloss even without sanding the putty. 【Features】 ■ Labor-saving in work processes ■ General-purpose thin application type for internal use ■ In the case of a painted finish: - Used as a top putty - Minimizes visibility of joints, significantly improving workability ■ In the case of plaster finishes: - Used as both base and top putty - Does not result in uneven gloss even without sanding the putty *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

"Kurinna Joint Compound" is an internal synthetic resin emulsion putty for general thick application. It can be used without dilution or stirring, offers good workability for repeated tasks, and does not clump. It focuses on grindability, achieving a balance that is neither too hard nor too soft. It has excellent adhesion and good bonding with the substrate. 【Features】 - Drying time is faster than conventional thick putties, leading to reduced construction time. - Can be used without dilution or stirring. - Minimal shrinkage and excellent thick application performance. - Focused on grindability, achieving a balance that is neither too hard nor too soft. - Excellent adhesion and good bonding with the substrate. *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

"Kurinna Lookstone" is an environmentally friendly, low-odor decorative exterior finish material that is completely water-based. It has anti-algae and anti-mold properties, which help suppress the growth of algae and mold. Even in areas where spraying is not possible, roller application can be done with the same paint as spraying, ensuring that the design remains consistent. 【Features】 ■ Achieves a sealer-less method ■ Can be applied by both spraying and rolling with the same paint ■ Matte finish ■ High decorative quality ■ Completely water-based *For more details, please refer to the PDF document or feel free to contact us.

• paint

"Kurinna Nice Paste" is an internal synthetic resin emulsion putty for general thin application. It is a super low-viscosity type that can be used as is, without dilution or stirring. It boasts smoothness and excellent workability with good cutting and stretching properties, making it resistant to scratches and easy to sand lightly. 【Features】 ■ Super low-viscosity type ■ Outstanding workability ■ Free adjustment of thickness ■ Suitable grinding properties ■ Excellent adhesion *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• paint

This product is a joint putty suitable for crack resistance. The "Carbolite," which has a proven track record in various crack prevention and repair applications, is now compatible for both interior and exterior use. It has excellent adhesion and forms a strong coating. 【Features】 ■ Forms a tough and elastic coating ■ Creates a highly waterproof coating ■ Excellent adhesion and workability *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Interior and exterior wall coating materials

"Guard II" is a versatile repair material that is pre-mixed and suitable for both interior and exterior use, based on acrylic. After several improvements, its workability has been enhanced compared to conventional types, and it has obtained JISK5669 (for water-resistant thick application). Due to minimal shrinkage, repairs can be completed in a single application, and unlike repairs with mortar, there is no need for on-site mixing, which leads to a reduction in construction time. 【Features】 ■ Usable for both interior and exterior, with excellent workability and strong adhesion to the substrate ■ Allows for a single thick application of up to 10 mm for holes and depressions ■ Provides a fine finish, suitable for water-based and low-solvent paints *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials

This product is a repair material for cracks and chips in exterior walls. It has quick-drying properties and excellent workability, adhering well to the substrate. It can be applied in thicknesses of up to 5mm in one application. It is suitable for substrates such as concrete, mortar, blocks, slate, bricks, and wood. 【Features】 - Easy to use and safe, comes in a tube - Can be applied in thicknesses of up to 5mm in one application - Quick-drying with excellent workability - Adheres well to the substrate *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• Reinforcement and repair materials

"MK Multi Sealer NANO" is a high-penetration, high-adhesion type one-component primer. It is suitable for lightweight materials with low specific gravity that have high absorption, such as calcium silicate boards, ALC, mortar, concrete, and gypsum boards with cut joints. The resin particles have been refined to penetrate deeper into the substrate, stopping the absorption of highly water-absorbent materials while also increasing surface strength. 【Features】 ■ Widely and multi-purpose use ■ Usable for repainting ■ Reinforcement of fragile materials ■ Excellent penetration ■ Significant performance improvement for topcoats ■ Compatible with a wide range of materials *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials
• Exterior coating materials

"MK Bridge Tape" is an interior-use fiberglass tape. Produced domestically, it ensures a stable supply of quality, eliminating fraying and uneven adhesive, thus improving work efficiency. Furthermore, with a thickness of only 0.12mm, which is about half that of conventional fiberglass tape, it becomes less noticeable on uneven surfaces, allowing for an even cleaner finish. 【Features】 ■ Stable quality supply due to domestic production ■ Eliminates fraying and uneven adhesive, improving work efficiency ■ Achieves a thinness of 0.12mm ■ Being thinner than conventional fiberglass tape allows for reduced putty usage and less labor, leading to cost savings *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof tape, adhesive, drain, protective panel

"MK New Calcium Sealer" is an environmentally friendly sealer that is safe, low-odor, and non-polluting. It is specifically designed for internal calcium boards but is also suitable for other substrates with high absorption. It has excellent adhesion and compatibility with topcoats, superior permeability, and enhances the strength of weak surfaces. 【Features】 ■ Quick drying and easy to work with due to being water-based ■ Safe, low-odor, and environmentally friendly ■ Good adhesion and compatibility with topcoats ■ Superior permeability that enhances the strength of weak surfaces ■ Compatible with brush, roller, and spray application ■ Suitable for fire-resistant covering boards *For more details, please refer to the PDF document or feel free to contact us.

• Interior coating materials

【Features】 - Color and gloss can be selected to match your image using marble-like paint. - A finish that harmonizes tranquility and calmness. - A warmth that envelops the space. - Create a unique wall with a finish that is exactly as you envision. - Reproducing ancient walls recognized by painting professionals in Europe as "Antic Stucco."

• Interior coating materials

"Kurinna Chōrikimaru" is a synthetic resin emulsion putty for internal and semi-external use that contributes to crack reduction in conventional joint treatment methods. Compared to traditional crack-resistant putties, it excels in workability and sandability. Additionally, since the finish is close to that of standard finishing putties, it is possible to perform putty treatment using only "Kurinna Chōrikimaru." 【Features】 ■ Lighter workability compared to conventional crack-resistant putties ■ Sandability similar to standard putties ■ Excellent adhesion ■ A dual-purpose type that can be used for thick application and finishing *For more details, please refer to the PDF document or feel free to contact us.

• Gypsum board and moldings

"Kurinna MAX Putty" is an internal synthetic resin emulsion putty that achieves excellent workability with a smooth application. It can be used without dilution or stirring, and there is almost no concern about shrinkage with a typical application thickness of around 3mm. Additionally, due to its excellent thick application performance, it can be applied up to 10mm thick in a single application. 【Features】 ■ Achieves smooth workability ■ Usable without dilution or stirring ■ Extremely low shrinkage ■ Can be applied up to 10mm thick in a single application ■ Dries faster than conventional kneaded putties, contributing to improved work efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Plastering base material

"MK Field Putty" is an internal synthetic resin emulsion putty that pursues lightness, smoothness, and fatigue-free workability. It can be diluted with water from 0% to 8%, providing versatility in workability, and there is almost no concern about shrinkage with a typical coating thickness (around 3mm). The sanding quality is unexpected for a thick putty, and it dries faster than conventional kneaded putties, contributing to improved work efficiency. [Features] - Pursues workability - Extremely low shrinkage - Sandability and drying - Can be applied up to 10mm thick in one coat - Ultra-lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Plastering base material

"Kurinna OT Paste" is a smooth and stretchable type of internal synthetic resin emulsion paste for both vertical and horizontal use, designed for putty application. Compared to conventional dual-purpose putties, it significantly reduces shrinkage, and there is almost no concern about shrinkage with a typical application thickness (around 3mm). Additionally, it has been formulated to dry faster than traditional products, making it quicker for drying in areas like corner treatments where drying is usually slow. [Features] - Dual-purpose type - Satisfactory workability - Reduced shrinkage - Remarkable drying time - Enhanced sanding properties *For more details, please refer to the PDF document or feel free to contact us.*

• Plastering base material

Complete water system (acrylic silicone resin) Applicable for both roller and spray application Launched with confidence by the pioneer of water-based multi-color pattern paints The finish is a matte type, further enhancing the design quality We have prepared 15 colors to meet the requests of our clients.

• Renovation and repair methods

Meiko's "Krinna Breath Weather" is a coating material that purifies unpleasant odors and transforms them into clean air, featuring lime plaster functionality. It has antibacterial effects, suppresses infectious diseases transmitted through walls, and adsorbs harmful substances to reduce the occurrence of sick house syndrome. This product is available for both interior and exterior walls, and comes in options for roller finishing and trowel finishing to allow for a variety of design expressions. 【Features】 ■ Coating material with lime plaster functionality ■ Reduces the occurrence of sick house syndrome ■ Effective against allergies and atopy ■ Can be applied over wallpaper for easy repainting ■ Clean and natural white appearance *For more details, please refer to the PDF document or feel free to contact us.

• Plaster wall
• Interior and exterior wall coating materials
• Plaster wall

Easy to apply, with a luxurious and beautiful finish. Environmentally friendly! This is a completely water-based exterior multi-color paint. 【Features】 ○ Completely water-based, unlike conventional multi-color paints ○ Forms a highly weather-resistant coating with excellent acid resistance for exterior use ○ Prevents discoloration and achieves low pollution thanks to the properties of acrylic silicone ○ Elastic and has excellent adhesion to the substrate ○ The first in Japan to offer two types: for roller and spray application ○ High design quality ○ Suitable for repainting due to performance aspects like adhesion and elasticity, along with high design quality! *For more details, please download the catalog or contact us. *Feel free to request the color sample book with all 18 colors or a physical sample paint board (A4 size).

• Exterior coating materials

We will mix the aggregates according to the pattern, eliminating the need for on-site mixing. With a wide variety of patterns and if they are in pastel colors, we will not charge for the colorants.

• Interior construction
• Exterior coating materials
• Interior coating materials