ノザワ List of Products and Services

We would like to introduce the "Alcas Secondary Waterproof Joint Specification" handled by Nozawa Co., Ltd. In the event of a sealing break, the water drainage hardware and gasket installed at the joint area suppress the intrusion of rainwater. Any water that enters the joint is directed to the hollow section of the panel and drained from the lowest layer. Please feel free to contact us if you need assistance. 【Features】 ■ Suppresses the intrusion of rainwater ■ Water entering the joint is directed to the hollow section of the panel * For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work

We would like to introduce the "Alcas Equal Pressure Joint Specification" handled by Nozawa Co., Ltd. By introducing the necessary air into the joint interior and eliminating the pressure difference between the outside and the joint interior, we prevent the intrusion of rainwater. Some rainwater may enter the joint due to the air introduction, but it is drained through the air inlet provided at each layer without reaching the interior. 【Features】 ■ Prevents the intrusion of rainwater ■ No need for sealing materials on the exterior side ■ Improved dirt resistance and maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Other services and technologies

"Asrock Insulation Plus" is an insulation panel that has insulation material pre-attached in the factory to Asrock. By installing the steel frame and fireproof coating separately, it achieves "external insulation" in steel frame construction. Additionally, it resolves the condensation issues that have been a challenge in steel frame construction by implementing external insulation, significantly improving the durability of the building. 【Features】 ■ Excellent insulation performance ■ Shortened construction period and rationalized installation ■ Easy separation and sorting ■ Resolves condensation issues ■ Enables "external insulation" without thermal bridges *For more details, please refer to the PDF materials or feel free to contact us.

• panel

The "Asrock Louver" is a louver that consciously selects and adjusts light, wind, and line of sight. It features a dedicated extruded cement board with wires incorporated into the base material, and safety is considered through four types of specialized attachment methods. Additionally, this product is gaining attention for its purpose of reducing environmental impact, such as lowering air conditioning loads through solar radiation adjustment and improving lighting efficiency through light adjustment. 【Functions】 ■ Fluorine ■ Polyurethane *For more details, please refer to the PDF document or feel free to contact us.

• Other wall materials

The "Refusukai/Refusukai Mini" is a design panel that has been designed with a specific angle of reflection based on Japan's annual solar angle on the surface of ASRock. During the summer, when the solar angle is high, the panel reflects a larger proportion of infrared rays into outer space, which reduces energy absorption at the surface and contributes to heat island mitigation. In contrast, during the winter, when the solar angle is low, the panel reflects a larger proportion of infrared rays back to the ground, allowing the ground to store heat. 【Features】 ■ The "solar reflection function" contributes to improving indoor and outdoor environments according to the seasons (functionality is only effective with horizontal installation). *For more details, please refer to the PDF document or feel free to contact us.

• panel

We would like to introduce the "Asrock Solar Wall" handled by Nozawa Corporation. Solar power generation, an inexhaustible clean energy source that does not emit CO2. If you wish to replace it with a high-performance solar cell system in the future, it is possible to exchange only the solar cell modules. [Features] ■ Achieves a smart wall surface ■ Allows for replacement of only the solar cell modules ■ Contributes to enhancing the company's image *For more details, please refer to the PDF document or feel free to contact us.

• Other wall materials

We would like to introduce the "Asrock Green Wall" handled by Nozawa Co., Ltd. By allowing for free shape molding, it directly holds special planting substrate blocks, creating a wall surface covered in greenery immediately after installation. Additionally, the weight of the green area is reduced by 80%, achieving low cost and high performance. 【Features】 ■ Reduction of total costs and improvement of construction efficiency for wall greening ■ A safe system that does not damage the wall surface ■ Reduction of overall system weight and wall thickness ■ Flexible planting arrangement is possible ■ Improvement of indoor environment and suppression of heat island effect due to the heat absorption effect of the planting soil *For more details, please refer to the PDF materials or feel free to contact us.

• Other wall materials

We would like to introduce the "Natural Series" handled by Nozawa Co., Ltd. To reduce color variation, we have specially managed base finish panels within the process. Additionally, we also offer "Natural Plus," which achieves high performance at a low cost. 【Features (excerpt)】 ■ Water tightness performance: 5000Pa ■ Water tightness performance: 3000Pa ■ Water tightness performance: 2750Pa ■ Reduced construction work ■ Factory processing *For more details, please refer to the PDF document or feel free to contact us.

• Other wall materials

We would like to introduce the "Asrock Tile Panel" handled by Nozawa Co., Ltd. Since tile processing is done in-house, there is less variation in tile adhesion strength, ensuring stable quality. Additionally, due to strict inspection standards, we maintain high adhesion performance. 【Features】 ■ Water tightness performance: 5000Pa ■ Water tightness performance: 3000Pa ■ Water tightness performance: 2750Pa ■ Factory processing *For more details, please refer to the PDF document or feel free to contact us.

• panel

We would like to introduce the "factory-painted products" handled by Nozawa Co., Ltd. By completing the surface finishing simultaneously with the exterior wall construction, it is possible to shorten the overall construction period. Additionally, the computer-controlled painting robots follow intricate programs to ensure that all products are finished uniformly. Please feel free to contact us when you need our services. 【Features】 ■ Water resistance performance: 5000Pa ■ Water resistance performance: 3000Pa ■ Water resistance performance: 2750Pa ■ Factory processing *For more details, please refer to the PDF document or feel free to contact us.

• Plastering and painting work

We would like to introduce the "Grid Design Series" handled by Nozawa Co., Ltd. The slits arranged within the panel provide contrast to the wall surface. You can choose from three types: plain finish, factory-painted single color, and two-color finish. Please feel free to contact us when you need assistance. 【Features (excerpt)】 ■ Water tightness performance: 5000Pa ■ Water tightness performance: 3000Pa ■ Water tightness performance: 2750Pa ■ Reduced construction work ■ Factory processing *For more details, please refer to the PDF document or feel free to contact us.

• Other wall materials

We would like to introduce the "Wood Design Series" handled by Nozawa Co., Ltd. This series combines 24 types of wood grain panels and adopts an endless manufacturing method that takes advantage of the characteristics of extrusion molding. Additionally, it eliminates the need for advanced craftsmanship and repair processes required in the "Cedar Board Real Formwork Concrete Method." [Features (excerpt)] ■ Water tightness performance: 5000Pa ■ Water tightness performance: 3000Pa ■ Water tightness performance: 2750Pa ■ Reduced construction work ■ Factory processing *For more details, please refer to the PDF document or feel free to contact us.

• Other wall materials

We would like to introduce the "Embossed Series" handled by Nozawa Co., Ltd. The light reflection created by the embossed design, ranging from 1mm to 10mm in depth, produces deep shadows and a sense of heaviness on the wall surface. Please feel free to contact us when you need assistance. 【Features】 ■ Water resistance performance: 5000Pa ■ Water resistance performance: 3000Pa ■ Water resistance performance: 2750Pa ■ Reduced construction work ■ Factory processing *For more details, please refer to the PDF materials or feel free to contact us.

• Other wall materials

We would like to introduce the "Design Panels" handled by Nozawa Co., Ltd. The standard movement width is 600mm, with a dynamic option of 900mm, and lengths can be manufactured up to 5000mm. We offer a wide variety of rib-shaped panels with different heights and pitches that provide various expressions, as well as random embossed panels, among many other types. Please feel free to contact us when you need assistance. 【Lineup (Excerpt)】 ■ Soleil Line ■ Tall Line ■ Gem Lock ■ Ref Sky ■ Ref Sky Mini *For more details, please refer to the PDF materials or feel free to contact us.

• panel

We would like to introduce the "Flat Panel" handled by Nozawa Co., Ltd. This panel features a surface that has been ground and smoothed, characterized by a sharp and delicate texture. We offer standard widths of 600mm and 900mm, and it has been widely adopted for exterior walls and partition walls. Please feel free to contact us when you need assistance. 【Features (Excerpt)】 ■ Water tightness performance: 5000Pa ■ Water tightness performance: 3000Pa ■ Water tightness performance: 2750Pa ■ Factory processing ■ Surface ground products *For more details, please refer to the PDF document or feel free to contact us.

• panel