松原産業 List of Products and Services

The Pinal Wall is a fence made of expanded polystyrene. Unlike block or wooden fences, it is lightweight yet safe, and has a high level of design! ■ Three Features ○ Safety through Lightweight Design The Pinal Wall is lighter than block or stone walls, making it less susceptible to the effects of natural disasters such as wind and earthquakes. ○ Reduced Construction Time Using the Pinal Wall can shorten the construction period. It is very lightweight and easy to handle compared to block or stone fences, which also reduces work time. ○ Cost Reduction The Pinal Wall can lead to a reduction in work time and construction processes due to the expected shortening of the construction period. For more details, please contact us.

• Gates, walls and fences

This document is a certification for excellent insulation materials. Our "Pinal Foam" has been certified based on the provisions of Article 6 of the Excellent Insulation Material Certification System Implementation Regulations by the Japan Building Materials and Housing Equipment Industry Association. For details, please refer to the PDF document. [Contents (partial)] ■ Certification category ■ Certified items ■ Certified products ■ Certification registration number ■ Certification registered company name *For more information, please refer to the PDF document or feel free to contact us.

• Heat insulation and heat shielding methods
• Insulation work

In 2013, the Expanded Polystyrene Association called for the provision of test specimens from its members and measured the thermal conductivity (λ) over time from immediately after the production of a total of 53 specimens corresponding to JIS A 9511 standards "Type 1, Type 2, Type 3, Type 4" at a public testing institution for up to 90 days. In 2016, three years later, the thermal conductivity of the specimens was measured again at a public institution to investigate the actual "time-dependent changes over three years." As a result, it was demonstrated that "the change in insulation performance of EPS is extremely small compared to other foamed plastics." The "long-term stability of insulation performance" is an essential factor for ensuring and maintaining a comfortable living space, as well as for prolonging the lifespan and value of housing. The "EPS insulation building materials," which have been proven to have extremely little change in long-term insulation performance, can be considered reliable insulation materials not only at the time of new construction but also for long-term residence. *For more details, please refer to the PDF document or feel free to contact us.

• Heat insulation and heat shielding methods
• Insulation work

We would like to introduce our "Insulation Precut System for Rigid Floors." We process materials such as Pinal Form and deliver them to your specified location. There is no need for cutting work on-site, resulting in minimal waste and a reduction in construction time. The absence of cutting debris from on-site processing leads to an improved work environment and reduced cleaning efforts. 【Features】 ■ No cutting work required on-site ■ Minimal waste generated on-site ■ Reduced construction time ■ Simplified construction process, leading to lower labor costs ■ Prevents insulation debris and dust from scattering to neighboring areas due to wind *For more details, please refer to the PDF document or feel free to contact us.

• Heat insulation and heat shielding methods
• Insulation work
• Other flooring materials

The "iZA Panel" is an insulation panel system that achieves HEAT20: G1 and G2 grades, allowing for the simultaneous installation of insulation materials, rafters, and sheathing (plywood) during the framing stage. It features "Pinal Foam," a long-lasting insulation material with minimal aging degradation, as its standard specification. Being a structural panel, it enables reduced construction work and shortened construction periods, with panel dimensions and insulation materials available in custom sizes. 【Features】 ■ Achieves HEAT20: G1 and G2 grades ■ Long-term performance insulation material Pinal Foam as standard specification ■ Simultaneous installation of insulation materials, sheathing, and rafters ■ Custom design options available *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)
• Heat insulation and heat shielding methods
• Insulation work

Matsubara Industry's environmentally friendly expanded polystyrene insulation material "Pinal Foam" fits perfectly without gaps, providing excellent insulation performance! It is also ideal for external insulation methods. We can deliver it pre-cut to the required dimensions, allowing for waste reduction and shortened construction time. *Limited to the first 30 companies, we are giving away cut samples! For more details, please contact us using the form below. 【Benefits of Pre-Cutting】 ◆ Significantly reduces the generation of scrap materials on site, greatly lowering industrial waste disposal costs! ◆ Prevents insulation material shavings and dust from scattering to neighboring areas due to wind! ◆ When delivered in 3x6 sheets, about 18-25% is typically lost, but we eliminate that loss! ◆ Simplifies the construction process, reducing costs through shortened construction time! ◆ Thick insulation materials that meet next-generation energy-saving standards can also be cut! *We are currently offering a catalog with case studies! For more details, please contact us or download the catalog to view it.

• Bead method polystyrene foam
• Insulation work
• Heat insulation and heat shielding methods

Matsubara Industry's environmentally friendly expanded polystyrene insulation material "Pinal Foam" fits perfectly without gaps, providing excellent insulation effectiveness! It is also ideal for external insulation methods. We can deliver it pre-cut to the required dimensions, allowing for no waste and a reduction in construction time. *Limited to 30 companies for cut sample gifts! For more details, please contact us using the form below. 【Benefits of Pre-Cutting】 ◆ Significantly reduces the generation of scrap materials on site, greatly lowering industrial waste costs! ◆ Prevents insulation material shavings and dust from scattering to neighboring areas due to wind! ◆ When delivered in 3x6 sheets, about 18-25% is typically lost, but this loss can be eliminated! ◆ Simplifies the construction process, reducing costs through shortened construction time! ◆ Thick insulation materials compliant with next-generation energy-saving standards can also be cut! *Catalogs with case studies are currently being distributed! For more details, please contact us or download the catalog to view.

• Bead method polystyrene foam
• Insulation work
• Heat insulation and heat shielding methods

Matsubara Industry's environmentally friendly expanded polystyrene insulation material "Pinal Foam" fits perfectly without gaps, providing excellent insulation performance! It is also ideal for external insulation methods. We can deliver it pre-cut to the required dimensions in advance, allowing for waste reduction and shortened construction periods. *Limited to the first 30 companies: Free cut samples! For more details, please contact us using the form below. 【Benefits of Pre-Cutting】 ◆ Significantly reduces the generation of scrap materials on-site, greatly lowering industrial waste disposal costs! ◆ Prevents insulation material shavings and dust from scattering to neighboring areas due to wind! ◆ When delivered in 3×6 sheets, approximately 18-25% is typically lost, but we eliminate that loss! ◆ Simplifies the construction process, reducing costs through shortened construction periods! ◆ Thick insulation materials compliant with next-generation energy-saving standards can also be cut! *Catalogs with case studies are currently available! For more details, please contact us or download the catalog to view.

• Bead method polystyrene foam
• Insulation work
• Heat insulation and heat shielding methods

Matsubara Industry's environmentally friendly expanded polystyrene insulation material "Pinal Foam" fits perfectly without gaps, providing excellent insulation effectiveness! It is also ideal for external insulation methods. We can deliver it pre-cut to the construction dimensions in advance, allowing for no waste and a reduction in construction time. *Limited to 30 companies, free cut samples available! For more details, please contact us using the form below. 【Benefits of Pre-Cutting】 ◆ Significantly reduces the generation of scrap materials on-site, greatly lowering industrial waste disposal costs! ◆ Prevents insulation material shavings and dust from scattering to neighboring areas due to wind! ◆ When delivered in 3x6 sheets, about 18-25% is typically lost, but this loss can be eliminated! ◆ Simplifies the construction process, reducing costs through shortened construction time! ◆ Thick insulation materials compliant with next-generation energy-saving standards can also be cut! *Catalogs with case studies are currently available! For more information, please contact us or download the catalog to view.

• Bead method polystyrene foam
• Insulation work
• Heat insulation and heat shielding methods

More and more clients want to build houses with external insulation. However, I believe that there are challenges in construction, such as sagging of siding and the fitting of window frames. At Matsubara Sangyo, we can meet our customers' needs by providing dedicated screws for external insulation and suggesting high-performance insulation materials. Please feel free to consult us. 【Features】 ○ Dedicated screws for external insulation available ○ Suggestions for high-performance insulation materials For more details, please contact us.

• Insulation work
• Heat insulation and heat shielding methods

We also handle exterior decorative materials for commercial facilities (pine moldings), so please feel free to consult with us. In addition to excellent durability and weather resistance, they can be freely shaped, allowing for a wide variety of designs. 【Features】 - We handle exterior decorative materials for commercial facilities (pine moldings) - Excellent durability and weather resistance - Freely shapeable - A wide variety of designs possible For more details, please contact us.

• Insulation work

To achieve a low-carbon society, the construction of ultra-long-lasting homes cannot be avoided. We will propose insulation materials tailored to each individual building plan. [Features] - Pinal foam is suitable for long-lasting homes due to its minimal aging deterioration. - We will propose insulation materials that match the plan of each individual building. For more details, please contact us.

• Insulation work
• Housing structure technology/long-term superior housing technology

Pinal Form does not use formaldehyde or chlorpyrifos during the manufacturing and molding of raw materials. Therefore, it can be used as building material without restrictions on usage area (F☆☆☆☆ grade). Additionally, acetaldehyde, which has been newly added to the "Act on the Promotion of Quality Assurance in Housing" (Housing Quality Assurance Act), is also not used during the manufacturing and molding of raw materials, just like formaldehyde, allowing for safe use. Pinal Form helps ensure that the families of our clients can live safely and healthily. 【Features】 - Pinal Form does not use formaldehyde or chlorpyrifos during the manufacturing and molding of raw materials. - It can be used as building material without restrictions on usage area (F☆☆☆☆ grade). - Acetaldehyde is also not used during the manufacturing and molding of raw materials, just like formaldehyde. For more details, please contact us.

• Insulation work

If you have any questions about eco-friendly renovations, please feel free to consult us. The application for the housing version of eco points started on March 8. Pinal Form has also been certified as insulation material eligible for eco point issuance and has been registered with the Ministry of Economy, Trade and Industry. For details on the issuance of eco points during renovations, please do not hesitate to contact us. 【Features】 - If you have any questions about eco-friendly renovations, please feel free to consult us. - Certified as insulation material eligible for eco point issuance and registered with the Ministry of Economy, Trade and Industry. - The installation of insulation material during renovation work is highly effective. For more details, please contact us.

• Insulation work

We will propose insulation materials that meet the energy-saving standards requested by the customer. Please feel free to consult us about anything, such as not having space for insulation or being unable to meet the Grade 4 standards for external insulation. 【Features】 ○ Proposing insulation materials that meet the energy-saving standards requested by the customer ○ Compatible with next-generation energy-saving standards and Grade 4 For more details, please contact us.

• Insulation work

In the case of wall insulation, Matsubara Sangyo Co., Ltd.'s insulation material is measured on-site between columns and studs while assigning numbers, and it is pre-cut at a dedicated factory according to each number. Therefore, on-site, the insulation material can be filled in with almost no processing required to match the assigned numbers. Additionally, during exterior insulation installation, we can also accept layout drawings and pre-cut each piece for delivery, which eliminates the need for processing on-site. 【Features】 ○ Measurements are taken on-site between columns and studs while assigning numbers, and pre-cut at a dedicated factory according to each number. ○ On-site, the insulation material can be filled in with almost no processing required to match the assigned numbers. ○ During exterior insulation installation, we can accept layout drawings and pre-cut each piece for delivery. ○ Eliminates the need for processing on-site. For more details, please contact us.

• Insulation work

In the case of wall insulation, Matsubara Sangyo Co., Ltd. pre-cuts each piece of insulation material to fit between the columns and studs at our dedicated factory before delivery. This eliminates the need for cutting on-site, contributing to a shorter delivery time. Additionally, when performing exterior insulation installation, we can also accept layout drawings and pre-cut each piece for delivery, further reducing on-site cutting efforts and shortening delivery times. 【Features】 - Each piece is pre-cut at our dedicated factory to fit between the columns and studs. - Eliminates the need for cutting on-site, contributing to shorter delivery times. - We can also accept layout drawings for exterior insulation installation and pre-cut each piece for delivery. For more details, please contact us.

• Insulation work

In the case of wall cavity insulation, our insulation material has slits, allowing it to be slightly compressed during filling. This results in excellent workability, fitting perfectly between the posts and studs. Additionally, during exterior insulation installation, we can receive layout drawings and pre-cut each piece for delivery. On-site, you simply need to install according to the drawings. 【Features】 ○ Excellent workability, fits perfectly between posts and studs ○ Can deliver pre-cut pieces ○ On-site installation is done according to the drawings For more details, please contact us.

• Insulation work

Matsubara Sangyo Co., Ltd. engages in manufacturing from the perspective of "helping our customers prosper" and continuously provides associated services. To achieve this, we value communication with our customers as well as internal and external communication. We strive to grasp our customers' needs faster than they do and are committed to responding to those needs with speed and the highest quality in the world. We aim to create a culture that initiates change and to work with a spirit of cooperation and harmony. As a result, we aspire to create a workplace where all employees and everyone involved with Matsubara Sangyo can work with pride. We always want to be of service to our customers. [Features] - Flexible responses made possible by being a local insulation material manufacturer - Pre-cut services available even for a one-tatami mat floor renovation or a single room wall renovation For more details, please contact us.

• Insulation work

Matsubara Sangyo Co., Ltd. engages in manufacturing from the perspective of "for our customers to prosper" and continuously provides associated services. To achieve this, we value communication with our customers as well as internal and external communication. We strive to grasp our customers' needs faster than they do and commit the entire company to respond to those needs with speed and the highest quality in the world. We aim to create a culture that initiates change and accomplishes work with a spirit of cooperation and harmony. As a result, we aspire to create a workplace where all employees and everyone involved with Matsubara Sangyo can work with pride. We always want to be of service to our customers. [Features] - Technical and proposal capabilities unique to an insulation material manufacturer - Responsive to customer requests tailored to their needs - Capable of handling large lots with one of the largest production facilities on the Sea of Japan side For more details, please contact us.

• Insulation work

Matsubara Sangyo Co., Ltd. engages in manufacturing from the perspective of "for our customers to prosper" and continuously provides associated services. To achieve this, we value communication with our customers as well as internal and external communication. We strive to grasp our customers' needs faster than they do and respond with speed and the highest quality in the world, making every effort as a company to meet our customers' demands to the fullest. We aim to create a culture that initiates change and accomplishes work with a spirit of cooperation and harmony. As a result, we aspire to create a workplace where all employees and everyone involved with Matsubara Sangyo can work with pride. We always want to be of service to our customers. [Industry] - For construction companies and house manufacturers - For house manufacturers and renovation companies - For renovation companies Please contact us for more details.

• Insulation work

EPS insulation material can be processed into various shapes using an NC cutting machine. Additionally, by creating molds, it is also possible to produce even more complex shapes of insulation. The shapes of houses are diversifying, and recently, there has been an increase in residential designs that are rich in aesthetics and creativity, leading to the emergence of modern homes. Board-type insulation can also meet a wide range of requests, from square to triangular and round shapes. 【Features】 ○ EPS insulation material can be cut into various shapes. ○ Triangular shape for gable walls → Cut into a triangular shape for on-site delivery according to the roof slope. ○ Round windows → Insulation is cut to match round windows, creating a rounded shape for delivery. For more details, please contact us.

• Roof and gutter construction
• Insulation work

The "Expanded Polystyrene Insulation Foundation Course" is a method of insulating the outside and inside of the foundation. Unlike floor insulation, which creates a buffer space under the floor, foundation insulation insulates the outer perimeter of the foundation without insulating the space underneath the floor, thereby incorporating the underfloor area into the living space and maintaining temperature. This improves the underfloor environment and is considered safe against wood decay. Additionally, since there are water supply and hot water pipes under the floor, the risk of accidents due to freezing is reduced. 【Features】 ○ Pre-cut and delivered to the height of the foundation, similar to walls and roofs ○ Antimicrobial type insulation materials for foundations can also be provided ○ When combined with skirt insulation, foundation insulation enhances the insulation effect even further For more details, please contact us.

• Roof and gutter construction
• Insulation work

The "Expanded Polystyrene Insulation Roof Course" is a method for installing insulation on a house's roof. By insulating the roof, it prevents the comfortable air conditioned indoors from escaping outside. Additionally, it effectively prevents temperature increases in the attic caused by heat buildup in the roof, making it very useful when utilizing the attic space as a loft or storage area. 【Methods】 - Rafter Filling Insulation Method - External Insulation Method - Purlin Insulation Method For more details, please contact us.

• Roof and gutter construction
• Insulation work
• Heat insulation and heat shielding methods

The "Expanded Polystyrene Insulation Wall Course" is a method of installing insulation material throughout the entire wall of a house. By insulating the walls of the house, it prevents the comfortable air that has been heated or cooled from escaping outside. In winter, it helps to prevent temperature drops due to cold air and stops the wall surface from cooling down to the dew point. There are mainly two types of wall insulation methods: filling insulation and external insulation. The filling insulation method involves measuring the internal dimensions between the posts and studs and pre-cutting each piece at a specialized factory. The thickness of the insulation material can be designed freely. The pre-cut products have slits, making them easier to fill. 【Methods】 ○ Filling insulation method ○ External insulation method For more details, please contact us.

• Insulation work
• Heat insulation and heat shielding methods

The "Expanded Polystyrene Insulation Floor Course" is a method of installing insulation material on the floor. By adding floor insulation, it alleviates the coldness of the flooring and prevents the comfortable air conditioned inside from escaping under the floor (outside the house). 【Method】 ○ Filling method between rafters (between joists) ○ Rigid floor method (Nedales method) For more details, please contact us.

• Insulation work

The "Whole House Styrofoam Insulation Course" is a program that installs insulation throughout an entire single-family home. It aims to create a home that is warm in winter and cool in summer by insulating the floors, walls, and roof without any gaps. Insulating the ground floor is even more effective. Additionally, there may be cases where insulation is applied to the foundation instead of the floor. By insulating the entire house with Pinal Form, the home will be warm in winter and cool in summer. This can save on annual heating and cooling costs and contribute to CO2 reduction. It also helps in preventing the ongoing issue of global warming. This course provides comprehensive insulation for the entire house. Since insulation is applied to the floors, walls, and roof (including the ground floor and foundation), the effectiveness is outstanding. [Construction Methods] - Rigid Floor Method (Nedales Method) - Wall Filling Method - Filling Method Between Rafters For more details, please contact us.

• Roof and gutter construction
• Insulation work

It is a building decorative material made of heat-resistant expanded polystyrene as the core material, with a special coating applied to the surface.

• Interior wall decoration

Environmentally friendly, non-Freon insulation material. Fits perfectly without gaps and provides excellent insulation effect.

• Insulation work
• Heat insulation and heat shielding methods

Insulation material for detached houses - Pinal Foam

• Bead method polystyrene foam
• Insulation work
• Heat insulation and heat shielding methods

The rise in oil prices has led to an increase in homes with lofts in living spaces. We aim to create houses that are cool in summer and warm in winter.

• Roof and gutter construction
• Insulation work
• Heat insulation and heat shielding methods