サンセルフ List of Products and Services

TYPE3 large type (width 900mm). With a height of 50mm, it offers higher visibility from a distance and has a deceleration effect. Its large size of 900mm allows it to absorb impacts softly when passing through. Installed in super-large parking lots such as the Aeon Mall Tokoname in 2015. By placing it on straight roads within facilities where high speeds can occur, it helps prevent potential contact accidents and encourages safe driving practices. Recommended installation locations include parking areas with long straight sections, such as super-large parking lots. It is a six-point fixed type, making it the most durable option, and is therefore recommended for areas with large vehicle traffic.

• Car and bicycle parking facilities

This is a floorboard material for a wood deck that emphasizes thickness. With a thickness of 31mm, it is essential for creating a sturdy deck. The surface and back have different finishes, allowing those who want to enjoy the texture of the wood grain to choose a stylish slit finish, offering two types of finishes in one board. Due to the characteristics of artificial wood, there is thermal expansion and bending, so we recommend securing the joists at a fine pitch. Additionally, like natural wood, there may be slight warping, so please adjust it similarly to natural wood when screwing it down. You can choose from colors such as light brown, dark brown, and black according to your preference.

• Wood deck (synthetic wood/resin)

This is a fixable type developed from customer feedback. It can accommodate piping with a maximum diameter of 60mm, making it suitable for large diameter piping as well. Since it is a taller type, please use it with caution to avoid twisting during vehicle passage. It can be fixed to the floor with bolts or similar methods to prevent shifting during vehicle passage. (When using anchors, it is recommended to install it on a concrete surface.) The main body is molded from durable recycled tire rubber, but please perform regular maintenance when large vehicles pass over it. Replacement parts for the flap and other components are also available, so please inquire. ◆ Main body size SDH-CP-3: 900×590×80mm (Weight: 22kg) ◆ Material Main body: Made of recycled rubber, Flap: Made of plastic

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Road facilities

This is a large-diameter type developed from customer feedback. It can accommodate piping with a maximum diameter of 80mm, making it suitable for drainage hoses during disasters. Since it is a tall type, please use it with caution to avoid twisting when vehicles pass over it. The main body is molded from durable recycled tire rubber, but please perform regular maintenance when large vehicles pass over it. Replacement parts for the flap section and others are available, so please contact us. ◆ Main body size SDH-CP-1: 900×610×100mm (Weight: 26kg) ◆ Material Main body: Made of recycled rubber; Flap section: Made of plastic.

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Road facilities

This type can store two rows of piping up to 30mm in slightly slim dimensions. It also includes corner parts, allowing for angled piping covers. Being a compact type, it is suitable for indoor use as well. The main body is molded from durable recycled tire rubber, but compared to other types, it is not superior in terms of strength, so please perform regular maintenance when vehicles pass over it. Replacement parts for the flap section and others are available, so please contact us. ◆ Main Body Size SDH-CP-2: 1000×250×45mm (Weight: 6.5kg) ◆ Material Main body: Made of recycled rubber, Flap section: Made of plastic

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Road facilities

This type is designed to be low in height, making it ideal for areas where unnecessary shocks to the vehicle should be minimized. With a height of 32mm, it can effectively reduce the impact during passage. Its low impact and speed-reducing effect make it suitable for use in ETC lanes on highways. It contributes to slowing down vehicles that enter the lane at excessive speeds and reduces damage caused by vehicle contact with the ETC lane barrier. Recommended installation locations include parking lots of commercial facilities, public facilities, and hospitals, where a complete stop is not necessary but a reduction in speed is desired, as well as areas where both speed reduction and impact minimization are important. ◆ Main body size: W 480 × D 610 × H 32mm, weight 10 kg ◆ Tip size: W 200 × D 610 × H 32mm, weight 3 kg *Installation anchors included.

• Car and bicycle parking facilities
• Car and bicycle parking facilities

This is a versatile type that can be installed anywhere. Its discreet black color blends well with the surroundings. It excels in pressure resistance and wear resistance. The anti-slip surface treatment makes it recommended for places that require higher safety! Although it has the same shape as TYPE4, it also considers design, making it ideal for locations such as within apartment complexes where a reduction in speed is desired without being too conspicuous. Of course, it can be expected to have the same deceleration effect as TYPE4, making it perfect for installation in areas where a stop is encouraged. Recommended installation locations: Areas with heavy vehicle traffic. This type has the highest deceleration effect, making it optimal for installation in places where a strong stop or deceleration effect is required. ◆ Main body size: W 500 × D 350 × H 45mm ◆ Tip size: W 250 × D 350 × H 45mm * Installation anchors included * Embedded reflective glass beads

• Car and bicycle parking facilities
• Car and bicycle parking facilities

It excels in flexibility and prompts attention with a reflective sheet. With a weight design of 4.7 kilograms, it is stable even in strong winds. The support part is made of flexible and highly visible PVC material. The base is made of recycled PVC material, which is heavier than typical traffic cones, making it stable without the need for cone weights. The top part is flexible, allowing for the installation of standard top lights.

• Car and bicycle parking facilities
• Parking lot facility construction

It excels in flexibility and prompts attention with a reflective sheet. Designed with a weight of 3.1 kilograms, it is stable even in strong winds. The support part is made of flexible and highly visible PVC material. The base is made of recycled PVC material, making it heavier than standard traffic cones, so it is less likely to tip over even without using cone weights. The flexible top allows for the installation of standard top lights.

• Car and bicycle parking facilities
• Parking lot facility construction

Guiding Line Marker Soft Cone M - A full-scale design at a low cost. The Soft Cone M800 non-base type is made of polyurethane, offering excellent flexibility. It features an embedded anchor type, making it easy to remove. The high-brightness reflective sheet uses a prism sheet, ensuring outstanding visibility at night. With an 8-sided base diameter of 100mm, it can be installed in narrow spaces such as on top of curbs or at the edge of blocks, where a round base would protrude. Base size: 100mm. Anchor bolts for installation are also included, allowing for installation on both asphalt and concrete surfaces.

• Road facilities

Guiding Line Marker Soft Cone M - A full-scale design at a low cost. The Soft Cone M650 non-base type is made of polyurethane, offering excellent flexibility. It features an embedded anchor type, making it easy to remove. The high-brightness reflective sheet uses a prism sheet, ensuring outstanding visibility at night. With an 8-sided base diameter of 100mm, it can be installed in narrow spaces such as the tops of curbs or ground blocks, where a round base would protrude. Base size: 100mm. Anchor bolts for installation are also included, allowing for installation on both asphalt and concrete surfaces.

• Road facilities

Guiding Line Marker Soft Cone M - A low-cost, fully designed product made of polyurethane, featuring excellent flexibility. The Soft Cone M760 base type is fixed at four points, ensuring safety even in the event of vehicle contact. The high-brightness reflective sheet uses prism sheets, providing outstanding visibility at night. The four-point fixed base allows for secure installation and can be placed on the upper part of curbs where round bases would protrude. Base dimensions: 160mm x 260mm. It also comes with anchor bolts for installation on both asphalt and concrete surfaces. The top-down anchoring method enhances workability and contributes to cost reduction in installation.

• Road facilities

Guiding Line Marker Soft Cone M Low-cost, fully designed, made of polyurethane with excellent flexibility, Soft Cone M 1000 base type, 4-point fixed type, ensuring safety even in the event of vehicle contact. The high-brightness reflective sheet uses a prism sheet, providing outstanding visibility at night. The base part is a 4-point fixed type, allowing for strong fixation and can be installed on the top of curbs where round bases would protrude. Base size: 160 mm * 260 mm Anchor bolts for installation are also included, making it possible to install on both asphalt and concrete surfaces. With excellent installation properties and top-down anchoring, it also contributes to reducing installation costs.

• Road facilities

Guiding Line Marker Soft Cone M Low-cost, fully designed, made of polyurethane with excellent flexibility, the Soft Cone M1000 ensures safety even in the event of vehicle contact. The high-brightness reflective sheet uses a prism sheet, providing outstanding visibility at night. Anchor bolts for installation are also included, allowing for installation on both asphalt and concrete surfaces. With excellent installation properties, the anchor fastening from the top contributes to reducing installation costs.

• Road facilities

Guiding Line Marker Soft Cone M Low-cost and fully designed, the Soft Cone M760 is made of polyurethane, offering excellent flexibility and peace of mind in case of vehicle contact. The high-brightness reflective sheet uses a prism sheet, ensuring outstanding visibility at night. Anchor bolts for installation are also included, allowing for installation on both asphalt and concrete surfaces. With its superior installation method using top anchors, it also contributes to reducing installation costs.

• Road facilities

Standard type with a height of 100 millimeters. It is lightweight and easy to install, contributing to cost reduction in installation expenses. Available in five colors, it offers excellent visibility. It comes with dedicated anchors suitable for asphalt and concrete surfaces, allowing for immediate installation.

• Road facilities

This is a low-height type with a height of 80 millimeters. It is lightweight, has good workability, and contributes to cost reduction in installation expenses. Available in five colors, it offers excellent visibility. It comes with dedicated anchors suitable for asphalt and concrete surfaces, allowing for immediate installation.

• Road facilities

This type can store up to five rows of standard 35mm piping. There are corner parts available, allowing for angled piping covers as well. The main body is molded from durable recycled tire rubber, but please perform regular maintenance when large vehicles pass through. We also have replacement parts for the flap section, so please contact us. ◆ Main Body Size SDH-CP-5: 900×500×55mm (Weight: 16kg) SDH-CP-5C: 310×500×55mm (Weight: 4kg) ◆ Material Main body: Made of recycled rubber; Flap section: Made of polyurethane.

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Road facilities

A foldable type with a base that takes up little space and has excellent storage capabilities. The standard model is lightweight, so it was sometimes necessary to use additional rubber weights during strong winds, but by making it an integrated type, it maintains its elasticity while weighing 3.2 kg, allowing for safe use. It is recommended for vehicle trunks and facility management in case of emergencies. With internal LED lighting, the entire cone emits light, providing excellent visibility at night. It uses two AA batteries, allowing for long-lasting flashing (approximately 120 times per minute) for 100 to 200 hours. It can be loaded onto all vehicles of large trailers used for nationwide vehicle transportation, contributing to daily safety management. ◆FC-68B: Main body size Height 680 mm (Base part 355 mm x 355 mm) *Includes LED light (internal lighting type)

• Car and bicycle parking facilities
• Parking lot facility construction

Experience the effects of Sunself products!! All products are available for sample lending. For more details about sample lending, please contact us.

• Car and bicycle parking facilities
• Safety Supplies
• Road facilities

This is a step plate ideal for eliminating the height difference at the parking lot entrance. It allows for a smooth transition onto the sidewalk and over the height difference. The surface is designed to reduce slipping. 【Features】 ○ Prevents shifting with connection using included bolts ○ Can be set to your preferred width. Main body size: 600*250*96 mm, Corner part: 250*250*96 mm There is also a type without reflective panels, so please inquire for more information. ● For other functions and details, please contact us.

• Car and bicycle parking facilities

This is a reflective road stud. We have achieved cost reduction through mass production of individual items. 【Features】 ○ Reflectors are used on both sides ○ Comes with an easy-to-install handle ● For other functions and details, please contact us.

• Car and bicycle parking facilities

It is a versatile type that can be installed anywhere. It has excellent visibility and is the number one in popularity. The number one popular type has been renewed! The surface has been treated with a non-slip finish to ensure safety. It also achieves increased strength at the bolt fixing points for durability. The body color comes in two colors: yellow and black, making it ideal for areas where attention needs to be drawn. At night, the embedded glass beads reflect vehicle lights to enhance visibility. Recommended installation locations… This type is recommended for installation in various places, including commercial facilities and public facilities. It is the type with the highest deceleration effect, making it optimal for areas where a strong need for stopping or slowing down is required. It is also the most cost-effective type. Installation in a single color is possible upon customer request. Please contact us for details. ◆ Body size W 500 × D 350 × H 45mm ◆ Tip size W 250 × D 350 × H 45mm * Installation anchors included * Embedded reflective glass beads

• Car and bicycle parking facilities
• Car and bicycle parking facilities

The installation effect on roads with dangerous structures that threaten pedestrian safety on general public roads is outstanding. 【Features】 ○ Large type with excellent visibility This is a large speed bump that can be expected to have vehicle deceleration and vehicle detour effects. ● For other functions and details, please contact us.

• Car and bicycle parking facilities

This is a type of parking stop made from waste rubber and waste plastic, designed with environmental considerations in mind.

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Road facilities

It is a compact type of wheel stop measuring 500mm and weighing approximately 3kg. It comes with a dedicated anchor for easy installation depending on the installation surface.

• Car and bicycle parking facilities
• Car and bicycle parking facilities
• Road facilities