シャープ化学工業 List of Products and Services

This is a weather-resistant modified silicone sealant. It has minimal volume shrinkage and excellent extrudability at low temperatures. It can be overcoated with most paints and spray materials. (However, some paints may cause stickiness, so it is necessary to check in advance.)

• glue
• Waterproofing work
• Roof and gutter construction

The "SK Pouch System" makes it difficult for hands and tools to get dirty, allowing for easier work. It allows for temporary storage even during use. It is suitable for work on roofs as it does not roll, making it a safer product compared to cartridges. Additionally, the case is smaller than a cartridge, which can reduce storage space. 【Features】 ■ Hands and tools stay clean, making work easier ■ Temporary storage is possible even during use ■ Suitable for work on roofs as it does not roll ■ Storage space can be reduced ■ Material storage stability is improved compared to cartridges (according to our comparison) ■ The dedicated gun can be used semi-permanently with part replacements *For more details, please refer to the PDF materials or feel free to contact us.

• Safety and consumables

The "Sharpie See-Through M Type NB" is a construction sealing material that can accommodate different colored application areas with just one tube. Compared to silicone, it has less water-repellent contamination, and being a non-bleed type, it has a lower possibility of paint film contamination. Please use it in areas where you want to preserve the texture of materials, such as log houses and wooden decks. 【Features】 ■ Non-bleed type ■ Can accommodate different colored application areas with one tube ■ Less noticeable even if it overflows ■ Less water-repellent contamination compared to silicone ■ Lower possibility of paint film contamination ■ Clear enough to see through the letters *For more details, please refer to the PDF document or feel free to contact us.

• Wood deck (synthetic wood/resin)
• Waterproofing work
• Imported houses and log houses

The 'Steel Structure Seal' is a sealing material suitable for steel structures such as bridges. It is a fast-curing type with excellent weather resistance. This flexible sealant can accommodate the contraction and expansion of metals. Additionally, it is a non-bleed type that does not cause stickiness or paint contamination with many paints, has excellent weather resistance, and can be left unpainted. [Features] - High elongation type with over 500% elongation - Non-bleed type that does not contaminate paint - Fast-curing type with tack-free in 60 minutes - Good weather resistance (can be left unpainted) *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Sharpie Waterproof Quick TX Free" is an environmentally friendly sealing material that does not contain toluene or xylene. It is a fast-curing type that excels in extrudability at low temperatures, which is expected to improve work efficiency on site. It can be used for waterproof substrate treatment, crack treatment, as well as around drains, corners, and cant treatments. [Features] - Excellent extrudability and trowel finish at low temperatures - Good workability even in winter - Fast-curing type - Intentionally formulated without toluene (T) and xylene (X) (TX Free) - Can be used to paint a wide range of coatings *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof tape, adhesive, drain, protective panel
• Roof and gutter construction
• Roof drain

"Roof Cork NB-Q" is a special non-bleed type sealing material made from modified silicone that does not cause bleed contamination with most paints. It is a fast-curing type that dries to the touch in 30 minutes at 23°C, allowing for immediate progression to the next step. Additionally, it has superior weather resistance compared to conventional modified silicones. Furthermore, it can adhere to various substrates without the need for a primer. [Features] - Adheres well to fluoropolymer-coated steel sheets - Non-bleed type with minimal contamination - Fast-curing type (surface dries in 30 minutes at 23°C) - Can adhere to various substrates without a primer - Superior weather resistance compared to general modified silicones *For more details, please refer to the PDF document or feel free to contact us.

• Metal roof
• panel
• Roof and gutter construction

"Tile Grip" is a one-component cartridge-type modified silicone and epoxy resin-based elastic adhesive. It is suitable not only for bonding and repairing tiles and stone materials but also for bonding and repairing various components of exterior and interior walls of single-family homes. It has obtained certification compliant with the Japan Adhesive Industry Association F☆☆☆☆ and 4 VOC standards. 【Features】 ■ One-component modified silicone and epoxy resin-based ■ Cartridge type ■ Easy to use ■ No hassle ■ High long-term reliability *For more details, please refer to the PDF document or feel free to contact us.

• tile

"Tsukanai Hotaru Cork" is a sealing material that contains glow-in-the-dark pigments that shine brightly in the dark. It is removable, allowing for reapplication even if it gets dirty. Since it can be applied with thickness, it can maintain residual brightness for a long time. Additionally, it comes in a pouch container, making hand application possible. 【Features】 ■ Pouch type ■ Glows brightly in the dark ■ Easily removable when no longer needed ■ Can be squeezed by hand ■ Easy application *For more details, please refer to the PDF materials or feel free to contact us.

• Interior construction
• Interior coating materials

The "Sharpie Seal M-2NB" is a non-bleed type architectural sealing material that is safe to use around metal fittings and joints. With a selection of 70 colors (Best 70) in toner shades, it allows for "color-matching application," making paint film cracking less noticeable. Additionally, by using the specified primer, it adheres to various substrates. 【Features】 ■ Provides stable durability performance over a long period for various joints ■ Adheres to various substrates when the specified primer is used ■ Excellent low-temperature workability, quickly adapting to joint movement ■ Capable of accommodating various color tones by using color paste ■ Unique non-bleed formulation minimizes darkening and contamination (bleed phenomenon) on finishing paints *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

The "Sharpie Seal U-2 NB" is a reaction-curing construction sealant. Thanks to its unique non-bleed formulation, there is almost no surface darkening or paint contamination. It has excellent workability. 【Features】 ■ Non-bleed type ■ Almost no surface darkening or paint contamination ■ Excellent workability *For more details, please refer to the PDF document or feel free to contact us.

• Humidity control materials
• Waterproofing work

This is a caulking air gun that can perform both spray application and bead application using materials such as sealing compounds. The thickness of the bead application can be adjusted by regulating the air pressure! You can easily switch between bead and spray modes by simply turning the cap at the tip. 【Product Information】 ■ Weight: 1.4kg ■ Extrusion Pressure: 1.45kPa ■ Maximum Injection Air Pressure: 1MPa (10bar) ■ Noise Level: Below 70dB Made by PC Cox, a leading caulking gun manufacturer in the UK. Usage video → http://www.youtube.com/watch?v=VIMfINbkhUI *For more details, please download the PDF or feel free to contact us.

• Work tools

This product is a caulking gun designed for film packs such as pouches. It is durable, resistant to breakage, and long-lasting, providing good cost performance in the long term. The transparent tube allows for easy confirmation of material usage, making it convenient. It can also extrude materials ranging from low viscosity to high viscosity. 【Features】 ■ Designed for film packs such as pouches ■ Durable and resistant to breakage ■ Long-lasting ■ Convenient transparent tube for confirming material usage *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

This product is a cartridge gun that can smoothly extrude high-viscosity sealants and allows for clean application. With a patented cam catch plate and a highly durable rod, it enables powerful extrusion for a long time. Its lightweight aluminum casting provides an easy-to-hold grip shape regardless of hand size, ensuring good workability. 【Features】 ■ Patented catch plate mechanism ■ Convenient hook for hanging ■ Long-lasting pressure relief plate ■ Ergonomically developed handle shape ■ High-durability epoxy coating: resistant to corrosion *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

This product is a repair material that, unlike acrylic-based products, has almost no shrinkage after curing. It can be finished with a flat and clean surface. Additionally, after curing, it becomes a hard rubber-like material, making it suitable for use on floor surfaces where people walk. Examples of use include filling holes, repairing cracks, and fixing damaged wooden parts. 【Features】 ■ Minimal shrinkage ■ High hardness ■ Transforms into a hard rubber-like state after curing ■ Usable for repairs on floors walked on by people *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Imported houses and log houses
• Wood processing

"Railway Repair Material" is a one-component special modified silicone repair material that can repair and extend the life of railway sleepers. It can be used for repairing corrosion caused by rain, filling holes in areas prone to water accumulation, and repairing cracks, as well as for repairing floor joints on platforms. Additionally, it exhibits excellent adhesion not only to wood but also to metal and concrete. 【Features】 ■ Extends the life of sleepers ■ Significantly reduces disposal and incineration costs for sleepers ■ Work can be done during operation with a short working time ■ Exhibits excellent adhesion to wood, metal, and concrete ■ Can also be used to prevent puncture by pin heels *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials

It is ideal for those who cut a large number of nozzles on manufacturing lines or in automotive repair shops, as well as for those working in unstable locations such as high places.

• Work tools

The "COX Skeleton Gun" is a caulking gun designed for cartridges that can handle a variety of materials from low viscosity to high viscosity. It is durable and long-lasting, providing good cost performance when considered over the long term. It is well-received not only by DIY users but also by professionals. It can be used for extruding sealants, not only on construction sites but also in factory lines that use high viscosity materials. 【Features】 ■ Durable and long-lasting ■ Compatible with various materials from low viscosity to high viscosity ■ Well-received by professionals ■ Manufactured by COX, a UK caulking gun manufacturer ■ Capacity: Compatible with 330ml cartridges *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Joint material
• Roof and gutter construction

The "Airflow3" is an air gun developed through repeated usability testing based on ergonomic principles, featuring an easy-to-handle and simple design. It is well-suited for use in production lines and repair shops. To enhance productivity and ease of use when used indoors, it is equipped with a silencer that keeps the noise level during operation below 70 dB. 【Features】 ■ Ergonomically designed ■ Lightweight and easy to handle ■ Easy material extrusion ■ Allows for precise application with the built-in regulator ■ Equipped with a silencer to reduce noise during operation *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Nozzle Cutter" is a nozzle cutter made by MATOR in Germany. It allows for easy cutting of nozzles from cartridges and pouches. It is suitable for tasks at height or for cutting large quantities of nozzles in factories and similar environments. 【Features】 - Easily cuts nozzles from cartridges and pouches - Utilizes high-quality blades made in Germany - Ideal for work at height or when cutting large quantities of nozzles *For more details, please refer to the external link page or feel free to contact us.

• Work tools

"Sharpie Paint Urethane NEO" is a moisture-curing polyurethane-based sealing material for construction that has good workability at low temperatures. It is a non-bleed type that does not use plasticizers, so there is almost no paint contamination due to bleeding. It has good workability at low temperatures and experiences less shrinkage compared to conventional urethanes. 【Features】 ■ Non-bleed type that does not use plasticizers ■ Almost no paint contamination due to bleeding ■ Less shrinkage compared to conventional urethanes ■ Topcoat painting is required when applied outdoors *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Waterproofing work
• Roof and gutter construction

The "Sharpie Yusei P Pouch" is a one-component oil-based caulking material that adheres to most substrates without the need for a primer. While the surface forms a film, it does not harden internally, allowing for a thick application that remains highly plastic inside, adequately following joint shrinkage and vibrations. It is a waste-reducing type of container, significantly reducing post-use waste compared to cartridge containers. 【Features】 ■ Adheres to most substrates without a primer ■ Forms a film on the surface but does not harden internally ■ Remains highly plastic internally, adequately following joint shrinkage and vibrations ■ Easy to dismantle after use since it does not harden internally ■ Provides rust prevention effects on iron plates, corrugated iron, and tin *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Waterproofing work
• Roof and gutter construction

The Biso Coat from Sharp Chemical Industries, founded in 1960, is a coating material that provides both beautification and waterproofing at the same time. It is a water-based single-component type, so there is no worry about mixing, and it can be handled safely. Despite being water-based, it has high initial water resistance and excellent weather resistance and waterproofing properties. It has been widely adopted in various applications, from residential homes to buildings and factories, with over 30 years of proven performance. 【Features】 ● Forms a flexible coating that is resistant to cracking! ● Effective weather resistance due to its acrylic resin composition! ● Excellent adhesion to the substrate and high waterproofing effect! *For more details, please contact us or download the catalog to view.

• Humidity control materials
• Waterproofing work
• Roof and gutter construction

"Exterior Wall Caulking" is a one-component modified silicone-based filler. It uses an SK pouch pack, allowing for hand-squeezing application. It can be painted over with most paints, but some paints may cause stickiness (bleed phenomenon), so it is necessary to check the paintability in advance. It is suitable for repairing cracks in exterior walls and for joint repairs in siding boards. [Features] ■ Moisture-curing type ■ Suitable for DIY ■ Contains anti-mold agents ■ Comes in a 200ml package for the right amount *For more details, please refer to the PDF document or feel free to contact us.

• Exterior wall Shirasu/Clay wall

"Bus Seal" is a one-component, silicone-based (deoxy) oxime type sealant. It comes in a small, hand-squeezable pouch container. Utilizing the SK pouch pack, it allows for application by hand squeezing. Since it contains a mold inhibitor, it is suitable for repairs in bathrooms and around sinks, as well as for tile joint repairs and repairs around countertops. 【Features】 ■ Moisture-curing type ■ Silicone-based ■ Small capacity, hand-squeezable pouch container ■ Contains mold inhibitor ■ 200g *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Tile work
• Roof and gutter construction

The "Sharpie Seal M-2" is a two-component modified silicone sealant that has high durability and weather resistance, as well as stable construction quality. It meets the JIS A 5758 class F-25LM for construction sealants and durability standard 9030. Additionally, by using color pastes for standard colors and siding-compatible colors, it can accommodate a variety of color tones. 【Features】 ■ High weather resistance and durability ■ Stable adhesion ■ Good construction quality ■ Multi-color compatibility *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

Good operability. Approximately 400 colors of dedicated toner.

• Joint material
• Waterproofing work
• Roof and gutter construction

The "Sharpie Seal LM-1 Multicolor" is a low-modulus (LM) type of modified silicone-based construction sealant designed for use with ceramic siding joints. It excels in weather resistance, heat resistance, and cold resistance, and being a one-component product, there is no concern about curing failure due to insufficient mixing. By using approximately 400 specialized color pastes, it can accommodate various color tones of siding. 【Features】 ■ Moisture-curing type ■ Excellent weather, heat, and cold resistance ■ No concern about curing failure due to insufficient mixing as it is a one-component product ■ Can accommodate various color tones of siding ■ Has stable adhesion *For more details, please refer to the PDF materials or feel free to contact us.

• panel
• Joint material
• Roof and gutter construction

"Sharpie Paint Acrylic" is a drying and curing type of acrylic-based construction sealant. Thanks to its unique non-bleed formulation, it offers excellent paintability with minimal surface darkening or paint film contamination. Being a one-component water-based type, it is easy to handle, and if it accidentally gets on your hands, it can be washed off with water before it cures. 【Features】 ■ Drying and curing type ■ Excellent paintability with a unique non-bleed formulation ■ Minimal surface darkening and paint film contamination ■ One-component water-based type ■ Easy to handle *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• glue
• Interior construction

"Sharpie Paint Seal NB" is a one-component acrylic silicone-based construction sealant suitable for siding joints. Thanks to its unique non-bleed formulation, it causes minimal darkening and contamination of finishing paints, and with the inclusion of a mold inhibitor, long-term maintenance of aesthetics can be expected. Surface drying takes 60 minutes at 23°C. It has a setting that is neither too slow nor too fast, making it user-friendly. 【Features】 ■ Moisture-curing type ■ Contains acrylic silicone ■ Minimal darkening and contamination of finishing paints ■ Suitable for siding joints ■ Surface drying in 60 minutes at 23°C ■ Mold inhibitor included for long-term maintenance of aesthetics *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• Waterproofing work
• Roof and gutter construction

"Sharpie Paint Hensei" is a non-plasticizer, non-bleed type modified silicone-based construction sealant that does not use plasticizers. It is less likely to cause contamination (bleeding phenomenon) of the finishing paint and the surface blackening due to the adhesion of dust and dirt. It is suitable for sealing base joints during siding repainting and as a base for painting. 【Features】 ■ Moisture-curing type ■ One-component type ■ Modified silicone-based ■ Fast curing & non-bleed ■ Less likely to cause contamination of finishing paint or surface blackening due to dust and dirt adhesion *For more details, please refer to the PDF document or feel free to contact us.

• ALC
• Joint material
• Roof and gutter construction

"Sharpie Urethane PRO" is a one-component polyurethane-based construction sealant that is highly elastic and excellent in cold resistance. It has excellent stain resistance due to minimal tack and no foaming after curing. It can be overcoated with most paints and spray agents. Additionally, there is almost no contamination around the joints. 【Features】 ■ No foaming after curing and minimal tack ■ Can be overcoated with most paints and spray agents ■ Almost no contamination around the joints ■ Highly elastic and excellent in cold resistance ■ Moisture-curing type *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Waterproofing work
• Roof and gutter construction

"Sharpie Yusei P" is a one-component oil-based caulking material that adheres to most substrates without the need for a primer. It forms a surface film, but does not cure internally. Therefore, when applied with thickness, the interior remains highly plastic, adequately following the contraction of joints and vibrations. Since the interior does not cure, disassembly after use is also easy. 【Features】 ■ Adheres to most substrates without a primer ■ When applied with thickness, the interior remains highly plastic, adequately following joint contraction and vibrations ■ Easy disassembly after use due to the interior not curing ■ Rust prevention effect ■ Available in one color: gray *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Waterproofing work
• Roof and gutter construction

"Sharpie Butyl B" is a butyl-based construction sealing material that is rich in elasticity and flexibility, and excels in aging resistance, water resistance, and chemical resistance. It has good adhesion and adheres well to various substrates such as metal, ALC boards, wood, and mortar without the need for a primer. It is suitable for sealing plywood joints in 2x4 houses, end treatment of waterproof sheets, and the folded parts and overlaps of sheet metal. 【Features】 ■ Curing type ■ One-component type ■ Excellent aging resistance, water resistance, and chemical resistance ■ Good adhesion ■ Low moisture permeability and gas permeability ■ Soluble in solvents (thinner) *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof sheet
• Waterproofing work
• Roof and gutter construction

The "Sharpie Hensei Silicone M Pouch" is a moisture-curing modified silicone-based construction sealant. It can be overcoated with most paints and spray materials. It has minimal volume shrinkage, excellent extrusion properties at low temperatures, and good weather resistance. Being a waste-reducing pouch container, it significantly reduces post-use waste. 【Features】 ■ One-component type ■ Can be overcoated with most paints and spray materials ■ Minimal contamination around joints ■ Excellent extrusion properties at low temperatures and good weather resistance ■ Significantly reduces post-use waste *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof sheet
• Waterproofing work
• Roof and gutter construction

"Sharpie Hensei Silicone M" is a moisture-curing, modified silicone-based sealing material for construction. Unlike standard silicone, modified silicone can be overcoated with most paints and spray materials. Additionally, it has minimal contamination around joints, excellent extrusion properties at low temperatures, and good weather resistance. [Features] ■ One-component type ■ Can be overcoated with most paints and spray materials ■ Minimal contamination around joints ■ Almost no volume shrinkage ■ Excellent extrusion properties at low temperatures and good weather resistance *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Waterproofing work
• Roof and gutter construction

"PoliSeal" is a silicone sealant that does not cause cracking in plastics due to its alcohol-curing type. It has excellent weather resistance. Additionally, it has a low modulus, allowing it to adequately follow the contraction and vibration of joints. The color is a discreet clear type. 【Features】 ■ Alcohol-curing type ■ Does not cause solvent cracking in plastics ■ Low modulus type that follows the movement of materials well *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work
• Roof and gutter construction
• Parking lot facility construction

"Sharpie Silicone S Anti-Mold" is a one-component construction sealing material containing an anti-mold agent, known for its excellent workability. It boasts superior weather resistance, ozone resistance, and ultraviolet resistance, along with water resistance and electrical insulation, and has a wide temperature range of -50°C to 150°C. It is suitable for the installation and repair of bathtubs and sinks, repairs around water areas, and sealing around water supply and drainage pipes. 【Features】 ■ Type with anti-mold agent ■ Excellent workability as a one-component product ■ Wide temperature range of -50°C to 150°C ■ Superior weather resistance, ozone resistance, and ultraviolet resistance ■ Minimal volume shrinkage after curing *For more details, please refer to the PDF document or feel free to contact us.

• glue
• Safety and consumables

The "Sharpie Silicone S Pouch" is a one-component, moisture-curing construction sealant with excellent workability. It has a wide temperature range of -50°C to 150°C. It excels in weather resistance, ozone resistance, and UV resistance, and has good water repellency, water resistance, and electrical insulation properties. The pouch container is designed to reduce waste after use. 【Features】 ■ Wide temperature range of -50°C to 150°C ■ Excellent weather resistance, ozone resistance, and UV resistance ■ Good water repellency, water resistance, and electrical insulation ■ Minimal shrinkage after curing ■ Waste-reducing pouch container *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components
• accessories
• glue

"Sharpie Silicone S" is a one-component construction sealing material that excels in workability. It has excellent weather resistance, ozone resistance, and ultraviolet resistance, as well as good water repellency, water resistance, and electrical insulation properties. Additionally, it has almost no shrinkage after curing. [Features] ■ Excellent weather resistance, ozone resistance, and ultraviolet resistance ■ Good water repellency, water resistance, and electrical insulation ■ Almost no shrinkage after curing *For more details, please refer to the PDF document or feel free to contact us.

• Glass construction accessories and films
• Water and sewerage pipe fittings
• Waterproofing work

We would like to introduce the "Modified Silicone Sealant Series" handled by Sharp Chemical Industries. By implementing "color-matching application (using sealant with a color tone similar to the topcoat)," it is expected to make cracks in the joint topcoat less noticeable. We offer the cartridge type "Sharp Pen-Sei Silicone NB-LM" and the 4L type "Sharp Seal LM-1NB." 【Features】 ■ Low modulus type ■ Non-bleed ■ Color-matching application ■ Less noticeable even if cracks occur *For more details, please refer to the PDF document or feel free to contact us.

• Ceramic siding
• Joint material
• Roof and gutter construction

The "SK Pouch" makes it difficult for hands and tools to get dirty, allowing for easier work. The amount of waste after use can be significantly reduced, and temporary storage is possible even during use. It does not roll, making it suitable for work on roofs, and it is safer compared to cartridges. At Sharp Chemical, we accept filling not only for sealants and adhesives but also for paints and greases into SK Pouches under your brand. 【Features】 ■ Significantly reduces the amount of waste after use ■ Allows for temporary storage even during use ■ As it is a film pack, it does not take up inventory space for auxiliary materials before filling compared to cartridges ■ The storage stability of materials is improved compared to cartridges (compared to our products) ■ The dedicated gun can be used semi-permanently with part replacements (hand squeezing is also possible) *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Joint material
• Roof and gutter construction

The "Sharpie Mobile Sealer 919 NEO" is a modified silicone-based sealing material for automotive repairs. It has excellent paintability and adhesion. Its good shape retention also ensures a clean finish. Additionally, since it is a modified silicone, it has better low-temperature workability compared to polyurethane sealers, making it easy to apply even in winter. 【Features】 ■ Moisture-curing, one-component type ■ Fast-curing type ■ Excellent paintability and adhesion ■ Good shape retention for a clean finish ■ Better low-temperature workability compared to polyurethane sealers, making it easy to apply in winter *For more details, please refer to the PDF document or feel free to contact us.

• Mural
• others

"Sharpie Hensei See-Through M" is a clear-colored modified silicone-based construction sealing material. It can accommodate different colored application areas with just one tube. Since it is clear, it is less noticeable even if it overflows. Compared to silicone, it has less water-repellent contamination and can be applied with most water-based paints. It is suitable for areas where you want to preserve the texture of the material, such as around electrical boxes and exterior walls, as well as indoors in log houses. 【Features】 - Moisture-curing type - One-component type - Can accommodate different colored application areas with just one tube - Less water-repellent contamination compared to silicone - Clear enough to see through the letters *For more details, please refer to the PDF document or feel free to contact us.

• Wood deck (synthetic wood/resin)
• Waterproofing work
• Imported houses and log houses

"Hotaru Cork" is a sealing material that glows in the dark. It can be applied with thickness, allowing it to emit light for a long time. It can be used as a guiding aid during power outages, for energy-saving in hallways and stairs, and as a evacuation guide and joint seal in public buildings such as subways. 【Features】 ■ Contains phosphorescent pigment ■ Glows in the dark ■ Emits light for approximately 6 hours *For more details, please refer to the PDF document or feel free to contact us.

• Luminous paint
• Mural
• glue

A peelable sealing material that can be removed after curing. It can easily mask uneven surfaces. Additionally, it can be used as a temporary seal for trial runs of large motors and engines, allowing for easy removal when disassembling again.

• glue
• Safety and consumables
• others