エルティーアイ List of Products and Services

This product is an evacuation safety product developed in collaboration with a factory that has experienced a major fire accident. It was created with the desire to never have victims again. ■Features 1. Enables rapid evacuation even during a fire During a fire, smoke rises, making it difficult to see emergency lights located high up. By applying the low-position phosphorescent tape from the α-FLASH series, it glows in the dark, allowing for quick evacuation. 2. Secures evacuation routes By applying it to various locations such as evacuation guidance lines, walls, and obstacles, the evacuation route becomes clear, enabling safe evacuation even during a power outage. 3. Clarifies evacuation exits Clarifying evacuation exits is crucial for rapid evacuation during a fire. By using the α-FLASH series, door knobs can be easily identified in the dark. 4. Long-lasting glow This high-brightness product meets the JIS standard JC class (over 100 mcd/m² after 20 minutes). It glows for approximately 6 to 8 hours after the light is blocked. *For more details, please download the PDF or contact us.

• Disaster prevention supplies

This is a high-brightness, long-lasting luminescent product that boasts world-class performance. It clearly indicates evacuation routes even during power outages. It was also used in the "Visibility Experiment in Dark Places" conducted by the Sakai City Fire Department in Osaka Prefecture, where its performance was recognized. As a disaster prevention and safety measure, it has been widely adopted in government offices, fire stations, factories, commercial facilities, hospitals, and high-rise buildings. 【Features】 ■ After light interruption, it has a residual light capability of approximately 6 to 8 hours ■ The highest brightness level in the country ■ Exceeds the JIS standard JC grade significantly *For more details, please download the catalog and check our company website.

• Other fixtures and fittings

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: HP-048 S-Class Certified Product Premium {S50・200 Class} ━━━━━━━━━━━━━━━━━━━━━━━ In the case of LED light sources, this is an ultra-high-performance product that exceeds 300 mcd/m² even after 20 minutes at 200 lx. It fully complies with the revised Fire Service Act and has numerous achievements in small-scale stores and commercial facilities. This product, which is the first in the industry to use environmentally friendly PET film, is easy to install as it is simply a peel-and-stick product. 【Specifications】 Material: PET, phosphorescent material, polyester resin, acrylic adhesive Thickness: 2mm We have a lineup prepared for "Emergency Exit" and "Corridor" use. Please check our company website! ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Disaster prevention supplies

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: HP-038 S-Class Certified Product {S50・200 Class} ━━━━━━━━━━━━━━━━━━━━━━━ "α-FLASH" SSN {S-Class Certified} is the first in Japan as a sticker type to obtain "Fire Safety Certification" as a "High Brightness Phosphorescent Guidance Sign." Additionally, it is the first in the industry to use environmentally friendly PET film, making it a product that can be easily applied. ◆ More affordable than certification number HP-030 while complying with regulations! 【Specifications】*Please refer to the catalog for size information. Material: PET, phosphorescent material, silicone resin, silicone-based adhesive Thickness: 0.82mm (±0.19) We have a lineup prepared for "Emergency Exit" and "Corridor" use. You can view it from the catalog download. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ ↓↓↓ ↓↓↓

• Other fixtures and fittings

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: HP-046 Class A Certified Product {A50・200 Class} ASN Series ━━━━━━━━━━━━━━━━━━━━━━━ With significantly higher luminous power than Class C certified products, it stores light and emits it even in somewhat dim environments of less than 50 to 200 lux. If the illumination is insufficient to use Class C certified products, Class A certified products or higher are recommended. It also demonstrates high visibility with LED light sources. ◆ Can be used as a substitute for guidance lights in small stores, etc. 【Specifications】*Please refer to the catalog for size. Material: PET, phosphorescent material, polyester resin, acrylic adhesive Thickness: 0.5mm We have a lineup for "Emergency Exit" and "Corridor" available. Please check our company website! ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Other fixtures and fittings

━━━━━━━━━━━━━━━━━━━━━━━━━━ 　　　Super High Brightness Glow-in-the-Dark Tape "SUPER α-FRASH" 　　　　　　　JIS Standard Highest Grade JD Class ━━━━━━━━━━━━━━━━━━━━━━━━━━ This tape absorbs sunlight, LED, and fluorescent light, glowing brightly in the dark to indicate pathways and evacuation routes. Even in dim environments (under 100 lux), "SUPER α-FRASH" shines with brightness exceeding 100 mcd/m² after 20 minutes as specified by JIS standards. It is used in various locations, such as pedestrian evacuation routes in low-light highway tunnels and evacuation guidance lines at nuclear power plants, as a product that effectively stores and emits light even in low illumination conditions. 【Specifications】 　Indoor JIS Standard JD Class Compliant Product 　Material: PET, phosphorescent material, polyester resin, acrylic adhesive 　Thickness: 0.5mm There are various patterns in size and shape. For more details, please visit our company website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　↓↓↓　　　　　　　　　　　　　↓↓↓

• Other fixtures and fittings

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: HP-042 Class C Certified Product {C200 Class} SN Series ━━━━━━━━━━━━━━━━━━━━━━━ "α-FLASH" is the first in Japan to obtain "Fire Safety Certification" as a "High Brightness Photoluminescent Guidance Sign" in the sticker type. Additionally, it is the first product in the industry to use environmentally friendly PET film, making it easy to install by simply sticking it on. 【Specifications】 Material: PET, photoluminescent material, polyester resin, acrylic adhesive Thickness: 0.3mm We have a lineup prepared for "Emergency Exit" and "Corridor" use. Please check our company website! ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Disaster prevention supplies

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Using water-resistant pigments! Outdoor glow-in-the-dark signs that maintain outdoor Class II brightness even after 10 years ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ In recent years, an increase in foreign tourists is expected even in rural areas, and the rapid evacuation guidance during disasters is becoming a challenge for local governments. Glow-in-the-dark evacuation guidance signs can convey where to escape during natural disasters (such as sudden heavy rain or typhoons) with just one sign, serving as a lifeline for tourists. Based on compliance with JIS standards, we listen to our customers' requests and provide optimal proposals. 【Features】 ■ Compliant with ISO 22578 and JIS Z 9098 ■ Maintains outdoor Class II brightness even after 10 years Passed the weather resistance test of 2000 hours (equivalent to 10 years), clearing the standard value of 10 mcd/m² or more even after 720 minutes (12 hours)! ■ Products compliant with emergency disaster prevention and mitigation project bonds For more details, please download the catalog and check our company website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Road signs and road accessories

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ High-performance, durable photoluminescent aluminum steps used in tsunami evacuation towers. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ These are aluminum steps with a photoluminescent function that can be installed on the nosing of stairs. They absorb sunlight and fluorescent light, allowing visibility in the dark for up to 12 hours. These high-performance steps are used not only in the stairs of commercial facilities and office buildings but also in tsunami evacuation towers. The installation method involves double-sided tape or screws, and countersinking is possible. The surface of the photoluminescent part is coated. 【Features】 ■ Usable indoors and outdoors ■ More than twice the brightness of outdoor Class I ■ Compatible with outdoor Class II type ■ Installation method: double-sided tape or screws (countersinking possible) ■ Coating on the surface of the photoluminescent part For more details, please download the catalog and check our website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Luminous paint

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ High-performance sheet with two functions: phosphorescence and reflection ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Alpha Prism is a high-performance sheet that complies with outdoor JIS standard "Type I," featuring two functions: phosphorescence and reflection. It has the ability to store sunlight during the day and emit light when it gets dark, known as "phosphorescence," and it reflects incoming light back in the direction it came from, known as "reflection." With effective phosphorescence for pedestrians and reflection for bicycles and cars, it is recommended as a safety measure during disasters. The back side is treated with an adhesive, making it easy to apply. 【Features】 ■ Double function of PLC (phosphorescence) + reflection ■ NETIS registered product (NETIS registration number: QS-170008-VE) It is registered in the New Technology Information System NETIS. For more details, please download the catalog and check our company website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Luminous paint

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: NP-013 Medium Brightness Certified Product TSN Series ━━━━━━━━━━━━━━━━━━━━━━━ The industry's first! A thin and lightweight medium brightness certified product in sticker form. The standard value for medium brightness certified products is the JA standard (24 mcd/m2 after 20 minutes), but our company adopts the higher JB standard (50 mcd/m2 after 20 minutes), resulting in more than twice the brightness compared to conventional products. 【Specifications】 Material: PET, phosphorescent material, polyester resin, acrylic adhesive Thickness: 0.25mm We have a lineup prepared for "Emergency Exit" and "Corridor" use. Please check our company website! ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　↓↓↓

• Disaster prevention supplies

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: HP-051 C-Class Certified Product PSN Series "C200 Class" ━━━━━━━━━━━━━━━━━━━━━━━ This is a high-brightness photoluminescent guidance sign made of rigid PVC plate type, with a 30% increase in luminous power compared to our conventional product (SN series). 【Features of Rigid PVC Type】 1. Sturdy thickness and hardness With a thickness of approximately 1.5mm, it has a sense of luxury. 2. High Luminous Power Luminous power has increased by 30% compared to our conventional product (SN series). 3. Double-sided tape on the back Unlike conventional plate types that required cutting and pasting double-sided tape, this product is a one-step application that simply peels and sticks. 【Specifications】 Material: Rigid photoluminescent PVC board, with 3M double-sided tape on the back Thickness: 1.5mm You can view specifications, test data, and CAD drawings on our website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Disaster prevention supplies

━━━━━━━━━━━━━━━━━━━━━━━ Fire Safety Certified Guidance Sign Certification Number: NP-014 Medium Brightness Certified Product TPSN Series ━━━━━━━━━━━━━━━━━━━━━━━ This sign is the first in the fire safety sign industry to obtain certification while having double-sided tape attached to the back. 【Features of Rigid PVC Type】 1. Sturdy thickness and hardness With a thickness of approximately 1.4mm, it has a premium feel. 2. High luminance The standard value for medium brightness certified products is JA standard (24mcd/m2 or more after 20 minutes), but our sign adopts JB standard (50mcd/m2 or more after 20 minutes). 3. Double-sided tape on the back Conventional plate types required cutting and pasting double-sided tape, but this product is a one-step process that simply peels and sticks. 【Specifications】 Material: Rigid photoluminescent PVC board, with 3M double-sided tape on the back Thickness: 1.4mm You can view specifications, test data, and CAD drawings on our company website. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ 　　　　　↓↓↓　　　　　　　　　　　　　↓↓↓

• Disaster prevention supplies

━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ A curb stud with a glow-in-the-dark function like never before! Visibility for pedestrians and vehicles is improved. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ■Features 1. Three functions: glow-in-the-dark + reflection + LED Comprehensive safety measures with effective glow-in-the-dark for pedestrians, reflection for cars and bicycles, and solar-powered LED! *Ultra-grade only 2. No electricity costs It stores sunlight and emits light, so no electrical work or electricity costs are required! 3. High load-bearing capacity Achieves a load capacity of 20 tons with the use of a PC cover! *Refer to high-grade specifications

• Road facilities