エイム List of Products and Services

The main cause of leaks from the roof is the deterioration of roofing materials. Generally used roofing materials can lead to leaks due to nail and screw holes and other forms of degradation. "The Roofing Under the Roof" is made of high-viscosity modified asphalt with a thickness of 1.3mm, which effectively seals nail and screw holes, preventing leaks and providing excellent durability. Additionally, it features a re-adhesive layer, allowing it to stick simply by peeling off the release film, eliminating concerns about being blown away by the wind. "The Roofing Under the Roof" is a roofing material that is "leak-proof" and "wind-resistant."

• Heat-insulating and moisture-permeable roofing

This is a seismic reinforcement kit that allows for the installation of internal walls to strengthen the building without destroying the existing floors and ceilings of wooden houses. [Features unique to Mois Kabetsuyoshi!] - Can be finished directly with plaster or wallpaper - Can accommodate openings under beams up to 400mm - By using the "non-cutting kit for long beams," installation can be done without cutting the long beams - Excellent fire resistance, and no toxic gases are produced even when burned - Additionally, it exhibits moisture absorption, desorption, and gathering effects.

• Juraku Wall

■Strong against repeated earthquakes! After a major earthquake, aftershocks occur repeatedly. By absorbing those tremors, we reduce damage to homes. ■Maintenance-free The TRC damper has a durability of approximately 60 years. ■We conduct seismic simulation! We offer "analysis simulations" that visually explain the effects of seismic control through graphs. Please contact us if you are interested. ■Obtained technical evaluation from the Japan Architectural Disaster Prevention Association! We have obtained the technical evaluation from the Japan Architectural Disaster Prevention Association, which is necessary to receive subsidies from local governments for seismic renovations. ◎For more details, please refer to the PDF or feel free to contact us.

• Anti-vibration rubber
• Vibration isolation, vibration control, and earthquake resistance construction

"Kazoku Mamoru" is an exterior retrofitting hold-down hardware for houses. It is said that during the Great Hanshin-Awaji Earthquake, houses experienced a pulling force of 4 tons, and Kazoku Mamoru can withstand up to 4.5 tons. By securing the foundation and columns together, it can prevent "tenon pull-out" and "separation," thereby mitigating damage from natural disasters such as earthquakes and tsunamis. It helps prevent the collapse of houses and protects important homes and families. Since it can be installed without breaking walls, it shortens construction time. Another feature is that it places less burden on the columns because the hardware is fixed to the columns with screws. *For more details, please download the catalog or contact us.

• Support hardware/opening hardware

- This is a seismic reinforcement kit that allows for the installation of internal walls to strengthen the building without breaking the existing floors and ceilings of wooden houses. - All necessary surface materials and screws for reinforcement are included in the set. There is no need to order screws individually; please order one set for each panel. - The seismic board is equipped with various specifications (large wall, true wall, post-installed columns) to accommodate different construction situations. - Obtained technical evaluation from the Japan Building Disaster Prevention Association (Evaluation Number DPA-Ju-Technical-13-2). - Since large-scale ancillary work, such as exterior wall reinforcement, is not required, we have achieved a cost reduction of 1/2 to 1/3 compared to exterior wall reinforcement.

• Dismantling and moving

"Inochimamoru" is an add-on hold-down device that is installed from the outside of existing houses. By securing the foundation and columns together, it prevents "tenon pullout," one of the main causes of collapse during major earthquakes, thereby protecting the structure from falling. ◇ It can withstand a pulling force of up to 7.36 tons! When installed on a reinforced concrete foundation (with a concrete compressive strength of 13 N/mm²), it has been experimentally proven to withstand a maximum pulling force of 7.36 tons on the columns. *The strength may decrease depending on the foundation's strength and the presence of rebar. ◇ It can be installed at a low cost Since it can be installed without cutting the walls, the cost is about 1/4 to 1/5 compared to cases where walls need to be cut. ◇ We offer covers that match the exterior walls There are upper and lower covers available, and you can choose from a total of four colors: hairline, ivory, brown, and beige. All are made of stainless steel, and the paint is baked on, providing excellent durability.

• Anti-vibration rubber

- Due to its porous nature, it has breathability, water absorption, odor absorption, and adsorption properties. - Moisture is retained within the charcoal due to capillary condensation in the fine pores. - It has an alkaline nature and acts to regulate mold and microorganisms. - It does not granulate much in a static state. - There is no expansion due to absorption. - Charcoal is not decomposed by microorganisms and does not leach out with water.

• Humidity control materials
• Waterproofing work