ジョー・プリンス竹下 List of Products and Services

The OT-G285-SUS is a bracket that extends and supports a handrail from the wall. Its simple silver color made of stainless steel blends well with any wall, from decorative designs to simple ones. It is easy to install, and even if the position is misaligned during installation, it allows for fine adjustments in the vertical direction and receiving angle, enabling smooth handrail installation. ★POINT★ ● Bracket that extends handrail pipes from the wall ● Compatible with round handrails ● Position adjustment possible during handrail installation ● Made of stainless steel with excellent corrosion resistance ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince for hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Office: 092-483-8566

• Support hardware/opening hardware

The glass stairs commonly seen in hotels and stores not only provide a sophisticated impression but also make the space feel more open. The bracket OT-G280-SUS that supports the handrail of such glass stairs features a stainless steel mirror finish that does not interfere with the clear impression of the glass. It excels not only in aesthetic beauty but also in ease of installation, allowing for adjustments in both vertical direction and angle for smooth mounting. ★POINT★ ● Bracket that extends the handrail pipe from the glass panel ● Compatible with round handrails ● Allows for position adjustments during handrail installation ● Made of corrosion-resistant stainless steel ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Office: 092-483-8566

• Glass staircase

Glass stairs commonly seen in offices and stores. By using glass for the wall surface of the handrail section, you can create an open space without a sense of pressure. Supporting such stairs is the stainless steel surface-mounted fix OT-G640-SUS. The key points are as follows: ★POINT★ ● Glass can be temporarily attached to the shaft, allowing for smooth installation. ● Adjustable glass overhang dimensions. ● Allowable load: 200 kg (when using 4 units and installed vertically). Please consider this fix that enables smooth installation. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

Fixed hardware for holding glass panels. Since it has a flat head shape, there is no protrusion on the glass surface. Additionally, the position of the glass can be adjusted. ★POINT★ ● Compatible glass thickness: OT-G360F-SUS-1: 8–18mm, OT-G360F-SUS-2: 8–12mm ● Allowable load: 70kg (when using 4 units and mounted vertically) ● Made of stainless steel, it has excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

Fixed bracket for holding glass panels. It has a flat head shape, so there is no protrusion on the glass surface. Additionally, the position of the glass can be adjusted. ★POINT★ ● Compatible glass thickness: 8–12mm ● Allowable load: 35kg (when using 4 pieces and mounted vertically) ● Made of stainless steel, excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince about hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

Fixed hardware for holding glass panels. The OT-G650-SUS is thick but can accommodate glass as well. It allows for temporary attachment of the glass during installation, making it highly efficient to work with. ★POINT★ ● Compatible glass thickness: 8–12 mm (contact us for thickness over 13 mm) ● Allowable load: 70 kg (when using 4 units and installed vertically) ● Made of stainless steel, excellent corrosion resistance. During glass installation, position adjustments can be made ±6 mm in the left-right direction, ±5 mm in the up-down direction, and a maximum of 4 mm in the depth direction. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

Fixed hardware for holding glass panels. It allows for temporary attachment of the glass during installation, making it highly efficient. Additionally, it enables position adjustment of the glass. ★POINT★ ● Compatible glass thickness: OT-G360-SUS-1: 8–18mm, OT-G360-SUS-2: 8–12mm, OT-G600-SUS-1: 8–18mm ● Allowable load: 70kg (when using 4 units and installed vertically) ● Made of stainless steel, offering excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

Fixed hardware for holding glass panels. It can be temporarily attached during glass installation, making it highly efficient for construction. Additionally, it allows for position adjustment of the glass. ★POINT★ ● Compatible glass thickness: 8–12mm ● Allowable load: 35kg (when using 4 pieces and installed vertically) ● Made of stainless steel, offering excellent corrosion resistance. ◇◇◇◇◇◇◇◇ Joe Prince Takeshita Co., Ltd. ◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

The OT-B456-SUS is a glass hinge designed for large doors. ★POINT★ ● Equipped with a soft absorber, allowing the door to close slowly, preventing the risk of pinching fingers and avoiding forgetfulness in closing. ● With a permissible load of 60kg when using two units, it is well-suited for large glass doors. ● Made of stainless steel, it has excellent corrosion resistance. It is not only suitable for commercial facilities and glass-walled offices but also excels in barrier-free rooms (handicap rooms) in medical and welfare facilities, which are designed with wide openings for smooth indoor access. During installation, the door can be adjusted by 5° in the closing direction while suspended, allowing for smooth installation work. Additionally, if the reaction force of the soft absorber is strong, it is possible to adjust the reaction force by changing the number of absorbers used. ◇◇◇◇◇◇◇◇Joe Prince Takeshita Co., Ltd.◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

The concealed hinges quietly perform their role in facilities such as office buildings, commercial spaces, and apartment complexes. By installing them on the back of the door, you can showcase the door's surface neatly without compromising its design. The B-160 series offers a variety of hinges, including standard types, stainless steel options, and those compatible with overlay doors, allowing you to choose the right hinge for your needs. We also provide self-closing types with springs that automatically close the door. ● Improved work efficiency on-site The rivet design prevents the pin from falling out, ensuring that the axis and wing body remain together, and it can be installed on either side, allowing for speedy work progress. ● Dimension design that eliminates the need for a 2.3mm liner The specifications that do not require a 2.3mm liner save the hassle and cost of installing a liner. While reducing effort, costs, and waste, it still provides the same strength as when a liner is installed. Additionally, by using our pivot hinges in conjunction, you can prevent door warping and accommodate large doors (door size H2100 or more). *Please contact us separately for details. We invite you to try our concealed hinge series!

• Steel Door

Handles that are often seen on board and cross-covered doors or stone-clad doors in apartments and commercial facilities. We often hear opinions that these handles should be as inconspicuous as possible. To meet such needs, Joe Prince has realized a concealed handle with the "H-311-SUS." The "H-311-SUS" is a handle compatible with board and cross coverings as well as stone cladding, and it is installed at the edge of the door, eliminating the need to attach handles or grips to the door surface, resulting in a clean appearance. ● Made of stainless steel, it is strong and has excellent corrosion and heat resistance. ● The door surface maintains a clean impression. ● There is no need to attach handles or grips to the door surface, enhancing design quality. ● It can be installed from the edge side with a flush mount.

• Steel Door

Inspection door, gas chamber, and trunk room wire stopper for inspection openings that is very popular for installation. There are three features! ● Easy installation. Just attach with screws! Since the clamp and wire are pre-assembled, installation can be done easily. It only takes two steps: attach the door-side fixing bracket to the door and the frame-side fixing bracket to the frame using the included screws. ● Easy angle adjustment. Just pull the wire! Adjusting the opening angle of the door is simple; just decide on the desired angle and pull the wire. Additionally, if you want to increase the angle, you can adjust the wire length by simply pressing the protruding part of the clamp. ● Mitigates impact when the door is opened By installing shock-absorbing rubber between the frame fixing bracket and the wire with a ball stop, it mitigates the impact when the door is opened. It can be installed on either side of the door without regard to left or right orientation, so there is no need to specify left or right. Furthermore, it can be installed on both standard frames and sash frames without optional parts, making it cost-effective. A wire stopper for inspection openings with excellent workability. Please give it a try.

• Steel Door

●Made of stainless steel, it can be safely used in wet areas. ●The angle at the tip of the door can be adjusted by up to about 5° while hanging on the door. ●It has a self-closing function at 25°. Glass partitions and glass doors create a high-quality space in hotel bathrooms and commercial facilities. Essential for such glass installations are glass hinges. Joe Prince offers a wide variety, including normal types, gravity types, and heavy-duty types. This time, we will introduce the normal type, with a total of 5 variations. You can choose from glass panel mounting type, wall mounting type, or frame mounting type. Finishes include mirror, hairline, matte black, and custom orders for gold, copper, and other finishes, allowing for coordination with the design of your space. Please give it a try. ◇◇◇◇◇◇◇◇Joe Prince Takeshita Co., Ltd.◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Bathroom Supplies

●The allowable load is 60kg, making it suitable for large glass. ●Made of stainless steel, safe for use in wet areas. ●Equipped with a door edge position adjustment function. This glass hinge can be used for large glass. With the rotation axis set at the base, it provides a wide opening width, contributing to a more open and spacious environment. ◆Recommended for barrier-free rooms! There is an increasing number of facilities, such as medical and welfare institutions and hotels, that are establishing barrier-free rooms in their bathrooms. Designed to ensure smooth entry and exit for wheelchair users and others, the opening is wide for comfortable use. Our heavy-duty glass hinge can accommodate glass door widths of up to 850mm (glass thickness 12mm) and 900mm (glass thickness 10mm), making it suitable for such environments. ◇◇◇◇◇◇◇◇Joe Prince Takeshita Co., Ltd.◇◇◇◇◇◇◇◇ Feel free to consult Joe Prince regarding hardware components. Osaka Branch: 06-6747-2591 Tokyo Branch: 03-3633-8505 Nagoya Branch: 052-893-0792 Fukuoka Sales Office: 092-483-8566

• Support hardware/opening hardware

Introducing the product "PT-180 Panel Clamp," born out of Joe Prince's contemplation of what could be done during the COVID-19 pandemic. Acrylic partitions have become commonplace in stores and offices, but issues such as "not being able to install them where I want" have arisen. This product solves those concerns. The biggest feature of this panel clamp is that the part that holds the panel can rotate! It can rotate 360°, allowing for free adjustment of the installation angle to vertical, parallel, or diagonal. Additionally, installation is very easy and requires no tools. Installation is completed in two steps: Step 1 "Clamp onto the tabletop," Step 2 "Clamp the panel." Anyone can install it, and it can also be easily removed if no longer needed. 【Features】 ■ Freely adjustable installation angle! The part that holds the panel rotates 360 degrees. ■ Available in two types to match the shape of tabletops and other surfaces. ■ Two colors: White and Black. *For more details, please refer to the PDF document or feel free to contact us.

• Fences, screens, and partitions

There is a growing demand for the intention to "hide as much as possible" hardware such as flat handles and hinges, as there is a desire not to show them decoratively. In recent years, in tower-type condominiums, hotels, hospitals, and public facilities, there has been an increasing trend to emphasize design, such as using colored steel plates or stone cladding in central corridor inspection openings. The "Hexagonal Cam Lock" is designed to minimize protrusion from the door surface to avoid compromising aesthetics. Additionally, by using optional accessories, it can be installed in such a way that only the handle insertion hole is visible from the door surface. It also features a click sensation, making it easy to understand the locked and unlocked positions. 【Features】 ■ Only the handle insertion hole is visible from the front of the door (in the case of frame-in or hole-drilling specifications) ■ Installation method can be chosen by using optional accessories ■ Design with minimal protrusion on the surface (maximum 1.7 mm)

• Steel Door

There is a growing demand for the intention to "hide as much as possible" hardware such as flat handles and hinges, as people do not want them to be visually prominent. In recent years, in tower-type condominiums, hotels, hospitals, and public facilities, there has been an increasing trend to emphasize design, such as using colored steel plates and stone cladding for corridor inspection openings. The "Clearance Lock" is a product that pursues "ultimate simplicity" to meet such needs. Since it is installed embedded in the frame, the only visible part from the front of the door is the handle insertion hole. It is unlocked using a dedicated handle (sold separately). When unlocking, simply rotating the handle causes the door to automatically open halfway, eliminating the need for a knob. 【Features】 ■ No handle!? A simple design with nothing attached to the door surface ■ Locking is completed just by closing the door, with a one-action lock function ■ Can be installed on flush doors, meeting doors, and standard doors

• Steel Door