エクサイト List of Products and Services

The number of heatstroke casualties in factories and on-site has been on the rise since 2022, with over 30 people dying from heatstroke each year, accounting for about 4% of all fatalities due to occupational accidents. The analysis indicates that most of the causes of heatstroke-related fatalities are due to "neglecting initial symptoms and delayed response," with 80% of these cases attributed to "delayed detection." Currently, the lack of clear regulations addressing this "neglect of initial symptoms and delayed response" is seen as a problem, leading to a review of the labor safety and health regulations. *For more details on the column, please refer to the related link. For further inquiries, feel free to contact us.*

• Safety and consumables

■ Easily trigger emergency SOS with just a light grip, linked to your smartphone! ■ Loud buzzer alerts those nearby to any abnormalities! ■ Pendant-type emergency notification system ■ Portable, making it ideal for outdoor monitoring 【Me Mamore Service Overview】 Me Mamore is the name of a system that enables emergency notifications through a series of devices, a Bluetooth-compatible smartphone, and cloud services working together.

• Safety Supplies

Due to the labor shortage in the job market and the rationalization and automation of equipment, the occurrence of "solo work" at company work sites is increasing. When unexpected accidents or disasters occur while performing "solo work," the most important thing is to quickly ensure the safety of the worker. In factories, research institutes, logistics warehouses, etc., when working alone in a location away from others, or even when working nearby but unable to see each other or hear each other despite shouting, or during patrols, if a health issue or heat stroke occurs and the worker collapses, the sensor detects the anomaly and simultaneously alerts registered phones, emails, and SMS via a smartphone (web service) with a loud alarm sound. 【Dangers of Solo Work】 ■ If a worker collapses due to an accident, disaster, or sudden illness, they cannot be seen by other workers. ■ If a worker collapses due to an accident, disaster, or sudden illness, they cannot contact other workers immediately. ■ If a worker collapses due to an accident, disaster, or sudden illness, their shouts cannot be heard by other workers. <We offer free rental of test devices> You can try out the test device for free. Please check the product's features and size to verify if it fits your work environment.

• Safety Supplies

Workers in factories and construction sites, elderly individuals living alone, people with disabilities using wheelchairs, those with chronic illnesses, individuals undergoing rehabilitation, and women or children walking alone at night are all living with various dangers when they act alone. The "Me Mamore Fall Detection Transmitter EXH-BTTK1" can be used in combination with a Bluetooth-compatible mobile phone to enable emergency notifications via messages, ensuring the safety of "important people" anytime and anywhere.

• Safety and consumables
• Safety Supplies

For every work site, in case of emergencies! ■ Instantly report worker collapse accidents or emergencies, allowing for rapid response. ■ The sensor detects a person's fall due to an accident (collapse for a certain period) and simultaneously triggers a loud alarm while automatically sending a notification. ■ The radio signal reach is "100m in line of sight." ■ The use of relay devices can extend the radio signal reach. ■ In addition to the alarm sound on the receiver, external outputs can be utilized for adding display boards, voice notifications, and remote reporting via telephone lines. ■ Emergency reporting is possible through the operation of a panic button. <We offer free rental of test units> You can try out a test unit for free. Please check the product's functionality and size to verify if it fits your work environment.

• Safety and consumables
• Safety Supplies

【With Buzzer】 Since it has a buzzer, even if multiple units are connected to the same channel of the receiver or receiving unit, you can tell which sensor is detecting by the buzzer sound when you approach the site. 【Electrode Type Leak Detection Notification】 When a leak is detected by the four electrodes located at the bottom of the case, a low-power wireless signal is automatically transmitted. 【Battery Operated】 It is battery-operated and does not require wiring, so it can be used simply by placing it in the desired location, such as on the floor. 【Height Adjustment Screw】 Equipped with height adjustment screws for stable installation according to the installation location. 【Low Battery Notification】 When the battery capacity drops below a certain level, the transmitter's indicator light will blink, and a low battery signal will be transmitted simultaneously during regular transmissions or alarm signal transmissions, notifying the receiver side of the abnormality. 【Radio Range and Relay Function】 The distance from the transmitter to the receiver can be used up to 100 meters. Additionally, by using an optional relay unit, the radio signal can be relayed, allowing for infinite extension.

• Other measuring instruments

This is a leak detection sensor transmitter that can respond to both extensive and spot monitoring. <We offer test units for loan!> To ensure that you fully understand and are satisfied with the functionality before making a purchase, we provide test units for free. Please make use of them for testing in real-world environments.

• Other security systems

It is possible to connect a lead wire type leak sensor and an electrode type point sensor. <We are lending out test equipment!> To ensure that you fully understand and are satisfied with the functionality before making a purchase, we are offering test equipment for free. Please make use of it for testing in actual environments.

• Sanitary fixtures
• Other security systems

A controller that can centrally monitor five circuits with reed wire sensors and electrode-type point sensors has finally arrived!! 【Five-Circuit Type】 This is a five-circuit version of the leak detection sensor controller EXL-CR1AD, which allows for the connection and operation of either a reed wire sensor (Z-AD-RS・FH) or an electrode-type point sensor (AD-PA-R) for each respective circuit. 【Simple and Clear Alarm Display】 The display panel is equipped with LED indicators for leak alarms (red) and disconnection alarms (yellow) for each channel. During an alarm, the corresponding indicator lights up and an alarm sound is emitted. *During the hold operation, the relevant LED indicators will blink. 【User-Friendly Alarm Output】 The leak output includes 1. a comprehensive output c contact, and 2. individual output c contacts for each circuit (×5), making it ideal for external information transmission and linkage operation with external devices (automatic reporting devices, rotating lights, sirens, solenoid valves, etc.). The disconnection output is a comprehensive output c contact. *With the setting switch, each output and indicator can be set to hold operation (indicator blinking). 【Equipped with Fail-Safe Functionality!】 Power outages are recognized as abnormal situations, triggering the operation of all alarm outputs.

• Other measuring instruments

This is a 5-channel receiving unit with an alarm sound, primarily designed to monitor fall call transmitters and water leak sensor transmitters. A "Test Mode" switch has been added to the operation panel, which is effective during routine inspections and regular checks, allowing for easy reception checks (such as receiving operations other than alarm outputs like LED and LCD displays) with alarm sounds. When receiving radio waves from the transmitter, it emits chime sounds or alarm sounds. The alarm sound and alarm output can be operated in real-time or timer mode (continuous = hold setting is also possible) based on the settings. *However, this applies only to fall call transmitters, water leak sensor transmitters, and contact input type transmitters. It is now possible to set whether or not to monitor regular transmissions (applicable to all transmitters). Up to 60 transmitters can be registered, and they can be divided into 5 groups (channels) for registration. The channel and registration number of the transmitter that received the radio waves are displayed on the LCD screen. This unit is also equipped with a radio environment inspection mode that allows you to check the installation environment.

• Other security systems
• Facility Management System

【Alarm Sound Upon Reception】 When receiving radio waves from the transmitter, an alarm sound will be activated. The volume can be selected from 0 to approximately 80 dB, and the duration can be chosen from 10 seconds, 30 seconds, 60 seconds, 90 seconds, 2 minutes, 3 minutes, 5 minutes, or continuous. 【Two Types to Suit Your Needs】 We offer two types equipped with individual outputs of 20 channels and 30 channels to accommodate security, disaster prevention, safety, and security systems in large properties such as buildings, factories, and facilities. You can choose the model according to the scale of the alert. 【Up to 60 Transmitters Can Be Registered】 You can register up to 60 transmitters distributed across the number of channels. It is possible to register all 60 transmitters on one channel or to register 30 transmitters on two channels for a total of 60. 【Individual Address of Transmitters Displayed on LCD】 The channel and address (registration number) of the transmitting unit that emitted the radio waves are clearly displayed on an LCD, making it easy to identify the transmitter. 【Alarm Memory Control Function】 The alarm memory can be controlled in conjunction with the armed/disarmed status. 【Four-Level Display of Radio Wave Level】 The reception status of radio waves from the transmitter is displayed both audibly and on an LCD (in four levels).

• Other security systems
• Safety and consumables

【Simple and Easily Identifiable Alarm Display and Sound】 The display panel is equipped with red LED indicators for each circuit, which light up during an alarm and blink during memory mode. Additionally, by setting unique alarm sounds for each circuit, the nature of the abnormality can be identified through the sound. * It is also possible to unify all five circuits to a single alarm sound. * Volume is adjustable (from silent to 80dB). 【User-Friendly Alarm Output and Sensor Power Supply】 The alarm output includes 1. comprehensive output c contact and 2. individual output c contacts for each circuit (×5), making it ideal for external information transmission and coordinated operation with external devices (such as automatic reporting devices, rotating lights, sirens, and solenoid valves). Additionally, it is equipped with a 500mA power supply for sensors, allowing for operation as a centralized monitoring panel with multiple EXL-SH12 or EXL-CR1AD units. 【Features a Hold or Real-Time Setting Function for Display and Output!】 The alarm indicator lights and alarm outputs can be set to either hold or real-time mode. This allows for selection based on the method of operation. * For example, during the output to the solenoid valve in the event of water leakage, it can be operated in 'hold' mode, etc.

• Security guards and entrance/exit management

■Introduced as the successor to the EXR-25AY and 25Y, now supporting 4 frequency bands. ■The power input has become a 2-way power supply, either AC100V or DC10-30V (no polarity). ■In the 'real-time operation' setting, when used in combination with tilt calls, leak sensor transmitters, and contact input type transmitters, the alarm operation will continue until a recovery signal is received. ■It can be installed indoors or outdoors and can register up to 50 transmitters. ■The wireless receiver is equipped with a flash light with 12 LEDs and a loud alarm sound of 95dB. ■In case of abnormal equipment monitoring in factories, it can notify with flashing lights and alarm sounds for alerts. ■After the alarm operation, it is possible to display the alarm memory indication through the flashing light. ■The status of armed/disarmed can be displayed with LEDs. (Only in single station mode) ■It has a regular transmission abnormality notification and a low battery notification function. ■Arming/disarming is possible with the separately sold remote control RSF-001.

• Other security systems
• Safety and consumables

【With Buzzer】 Since it has a buzzer, you can connect multiple units to the same channel of the controller or display panel, and by going near the site, you can tell which sensor is detecting by the buzzer sound. 【Compact】 It has a lightweight and compact design that makes it easy to install anywhere. 【Electrode Type Leak Detection】 It detects leaks with two electrodes located at the bottom of the case and notifies you by lighting up the indicator lamp. 【Waterproof Structure】 The case is waterproof, so it will not malfunction even if submerged in water. 【Height Adjustment Screw】 It comes with a height adjustment screw for stable installation depending on the installation location. 【Fixer】 It includes a fixer that makes it easy to secure to surfaces like floors. 【Centralized Monitoring】 By connecting to the controller, it is possible to centrally monitor multiple sensors at once.

• Other measuring instruments

■Wired type ■Point sensor ■Spot detection at 1 location ■No buzzer ■DC power type <We are lending out test units!!> To ensure that you fully understand and are satisfied with the functionality before making a purchase, we are offering test units for free. Please make use of them for testing in actual work environments.

• Other security systems
• Waterproofing work

It is a system that quickly detects water leaks and flooding accidents in buildings, factories, stores, apartments, and general residences, issues alarms, and reports them. Test machines are available for free rental!!

• Other security systems
• Safety and consumables
• Waterproofing work

【With Buzzer】 Since it has a buzzer, even if multiple units are connected to the same channel of the controller or display panel, you can tell which sensor is detecting by the buzzer sound when you approach the site. 【Electrode Type Water Leak Detection Notification】 When water leakage is detected by the electrodes located at the bottom of the case (four main body electrodes and two point sensors), a low-power wireless signal is automatically transmitted. 【Water Leak Detection at Two Locations】 Water leakage can be detected at two locations: the main body and the point sensor (with a cable length of 3.4m). The main body can be installed in a location that makes maintenance, such as battery replacement, easy, while the point sensor can be installed in concealed areas like ceilings or under floors. 【Waterproof Structure】 The case is waterproof, so it will not malfunction even if submerged in water. 【Battery Operated】 Being battery-operated and requiring no wiring, it can simply be placed in the desired location, such as on the floor. 【Height Adjustment Screw】 Equipped with a height adjustment screw for stable installation according to the installation location. 【Low Battery Notification】 When the battery capacity drops below a certain level, the transmitter's indicator light will blink, and a low battery signal will be transmitted simultaneously during regular transmissions or alarm signal transmissions, notifying the receiver of the issue.

• Other measuring instruments

【With Buzzer】 Since it has a buzzer, even if multiple units are connected to the same channel of the controller or display panel, you can tell which sensor is detecting by the buzzer sound when you approach the site. 【Electrode Type Leak Detection Notification】 When a leak is detected by the four electrodes located at the bottom of the case, a low-power wireless signal is automatically transmitted. 【Waterproof Structure】 The case is waterproof, so it will not malfunction even if submerged in water. 【Dual Power Supply Compatible】 You can choose between commercial power supply and battery depending on the application. 【Height Adjustment Screw】 Equipped with height adjustment screws for stable installation according to the installation location. 【Low Battery Notification】 When the battery capacity drops below a certain level, the transmitter's indicator light will blink, and a low battery signal will be transmitted simultaneously during regular transmissions or alarm signal transmissions, notifying the receiver of the abnormality. 【Radio Wave Reach Distance and Relay Function】 The distance from the transmitter to the receiver can be used up to 100 meters. Additionally, by using an optional relay unit, the radio waves can be relayed, allowing for infinite extension.

• Other measuring instruments

Adopts a dual power supply system that can be selected according to the application. By combining with various receivers, automatic reporting devices, and indicator lights, it supports a wide range of applications.

• Other security systems
• Safety and consumables
• Waterproofing work

This is a transmitter that detects water leaks and flooding accidents early, issues an alarm, and reports them. It detects water leaks and transmits that information wirelessly. We are lending out test units! To ensure that you fully understand and are satisfied with the functionality before making a purchase, we are offering test units for free. Please make use of them for testing in real-world situations.

• Other security systems
• Waterproofing work

This is a leak detection sensor that alerts you with an alarm sound (75 dB) when it detects water leakage. It is a compact, palm-sized device that can be installed in various locations! <We are lending out test units!!> To ensure that you fully understand and are satisfied with the functionality before making a purchase, we are offering test units for free. Please make use of them for testing in actual environments.

• Other interior and exterior systems and units
• Waterproofing work
• Unit and other construction

In condominiums, apartment buildings, and two-family houses, unexpected water leakage accidents can occur due to leaks in underfloor piping or water areas (such as sinks, laundry pans, kitchen sinks, toilets, and bathrooms), which can damage furniture and interior materials, and in severe cases, even affect the units below. A "leak detection device" is a simple alarm that can quickly detect such unpredictable water leaks (like leaks) to minimize damage. ■ For condominiums and apartment buildings ■ Spot type ■ Simple design ■ Easy installation (no wiring or installation work required) ■ Inexpensive and compact ■ Long lifespan (battery life of about 5 years) ■ Maintenance-free

• Other interior and exterior systems and units
• Other security systems
• Unit and other construction

This is a leak sensor that detects water leaks and alerts you with an alarm sound (75 dB). It is a compact, palm-sized device that can be installed in various locations! <We are lending out test units!!> To ensure that you fully understand and are satisfied with the functionality before making a purchase, we are offering test units for free. Please make use of them for testing in real environments.

• Waterproofing work

When a vehicle approaches a location with height restrictions, the driver's negligence can lead to contact or collision with overhead structures, resulting in serious accidents. Therefore, an "outdoor height detection infrared sensor transmitter" installed before the height-restricted area detects any exceedance of the height limit and sends an alarm signal to the receiver, prompting the driver to stop and encouraging surrounding individuals to take evasive action, thereby preventing accidents before they occur.

• Parking lot facility construction
• Crane and others
• Other civil engineering services

Unlike conventional direction detection systems, this one has two detection zones, allowing for direction detection with a single unit. (The detection direction can be switched using a switch.) We are lending out test units.

• Entrance/Exit Gate System
• Other civil engineering services

For every work site, in case of emergencies! ■ Instantly report worker collapse accidents and emergencies, allowing for rapid response. ■ The sensor detects falls due to accidents (collapses lasting more than a certain time) and simultaneously triggers a loud alarm while automatically sending notifications. ■ Can be used in explosion-proof areas such as chemical plants and industrial sites. ■ Signal transmission distance is "100m in line of sight." ■ The use of relay devices can extend the signal transmission distance. ■ In addition to alarm sounds from the receiver, external outputs can be utilized for additional display panels, voice notifications, and remote reporting via telephone lines. ■ Emergency notifications can be made by operating the emergency button. <We offer free rental of test units> You can try out a test unit for free. Please check the product's functionality and size to verify if it fits your work environment.

• Safety and consumables

Currently lending out test equipment for free!! ● For safety measures in solo work ● For safety measures in on-site patrols ● For safety measures for workers in areas not visible to others ● For safety measures during holiday work ● For safety measures in monitoring tasks at the plant ● For safety measures in non-routine tasks such as repairs and inspections ● For safety measures for workers in areas where loud voices cannot be heard by other workers ● For safety measures against heatstroke

• Safety and consumables
• Equipment leasing and rental

Currently lending out test equipment for free!! ● For safety measures in solo work ● For safety measures in explosion-proof areas ● For safety measures during on-site patrols ● For safety measures for workers in areas not visible to others ● For safety measures during holiday work ● For safety measures in monitoring tasks at plants ● For safety measures in non-routine tasks such as repairs and inspections ● For safety measures for workers in areas where shouting cannot be heard by other workers ● For safety measures against heatstroke

• Safety and consumables