神田ゴム化学 List of Products and Services

It helps to maintain the temperature of heated liquids and prevents evaporation and splashing. It is a hollow ball without holes. Please choose the size according to your application. It has excellent heat resistance and chemical resistance.

• others

The container is made of PP and has a double structure. The outer part is flared at the bottom for stability. The inner part is designed to lower the bottom section, allowing it to draw up nearly the entire amount of liquid. The cap of the container is set with each dropper.

• others

It is used with a suction filtration funnel and consists of 6 combinations, allowing it to fit the size of the counterpart. Since there are 6 types of sizes and colors (in the case of colors), it can be used with all types of bottles with different diameters, such as funnels and glass filters.

• others

It is used with a suction filter funnel and consists of 6 combinations, allowing it to be adjusted to the size of the counterpart. There are 6 types of sizes and colors available (in the case of color), making it suitable for all types of bottles with different diameters, such as funnels and glass filters.

• others

We offer a wide variety of sizes and accept small orders as well.

• others

Due to the low gas permeability and high resilience after the withdrawal of the injection needle, there is an advantage of being able to use the injection needle multiple times when used with a vial. The internal part of the bottle is made longer.

• others

The design makes it easy to connect the tubes, and there are various sizes available. It has excellent chemical and heat resistance.

• Piping and electrical wiring materials

Due to its excellent transparency, fluid inspection can be performed smoothly. It is lightweight and easy to use, and installation with fittings is also straightforward. Features: - The inclusion of vertical threads minimizes elongation under pressure. - There is no separation between layers. - The burst pressure is designed to be 4 to 5 times that of normal pressure. - In particular, the elongation during temperature rise is less than half compared to other products.

• Rock drills, demolition machines, and excavators

Rubber tubes connected to experimental equipment typically have an inner diameter of 4mm to 6mm, but when connected to laboratory faucets, they require finger strength to attach and can come loose afterward, and the rubber tends to age more quickly, presenting various issues. Additionally, when connecting pressure-resistant rubber tubes with a smaller inner diameter, there is the challenge of a significant difference in diameter within the equipment. However, the connector is a convenient solution that addresses these problems. It is especially suitable for vinyl tubes.

• Wiring devices

It does not dissolve in alcohol, ketones, or glycols, but it dissolves in aliphatic, aromatic, ether, and chlorine-based solvents. Additionally, it is stable against most mineral oils, vegetable oils, many organic chemicals, and gases. Features: - High purification has removed volatile components, allowing for a high vacuum of 10^-6 mmHg. - It can be used over a wide temperature range (approximately -40 to 204°C). In the absence of oxygen, it can be used up to 260°C. - It is chemically stable, showing little oxidation even at high temperatures, with excellent oil and chemical resistance, and it does not dissolve in water. - It has excellent insulating properties. - It has minimal impact on human health.

• Safety and consumables
• others

This product is a newly designed clip that can be easily attached to beakers and similar containers. The large tube holder holds tubes with an outer diameter of 14mm or less, while the small one holds tubes of 10mm or less. Thin tubes can be inserted into the V-shaped part. When using a stick thermometer, insert the thermometer facing the opposite side and adjust the height as needed.

• others

There are five colors including natural, so you can use them for different purposes.

• others

This is a very convenient product that allows for both cleaning and stirring with just one item. (The part that is not made of rubber can be used as a stirring rod.) It is a tool for appropriately cleaning up residues in containers such as beakers, and it has been designed with a spherical end on the opposite side to serve the purpose of stirring.

• others

Conventional rubber spatulas are attached to the handle using nails, but this product has the handle inserted into the spatula. It has sufficient strength, but please avoid excessive bending.

• Work tools
• Plastering and painting work
• others

It can be suctioned with a bellows and pushed out.

• Safety and consumables

Research is active on enhancing heat resistance, cold resistance, and rebound elasticity in polymer tubes, but we confidently recommend the Sunlon V tube. It is a high-grade vinyl-based polymer tube that is cold-resistant and does not become hard even in winter.

• Piping and electrical wiring materials

Multi W tubing is a soft polyethylene tube with a polyolefin liner arranged inside a special elastomer. The liner part is thermally fused, so it will not peel off. However, please avoid tightening it too much with pinch cocks or similar devices.

• others

It is a plastic container used in experiments, etc. It is used for stirring and mixing liquids.

• Safety and consumables
• others

Features: The spout forms a semicircle downward, allowing liquids to flow relatively easily, making it designed to easily discharge high-viscosity substances and similar materials.

• Safety and consumables
• others

It is very convenient when refilling, and it significantly improves work efficiency.

• Safety and consumables
• others

- Characteristics 1. We offer three colors: red, blue, and yellow, making it easy to confirm line distinctions. Additionally, each color is transparent, allowing for fluid visibility. 2. The tube has a double structure with an inner and outer layer. The inner layer uses a particularly excellent elastomer, ensuring satisfaction with chemical resistance, oil resistance, and cold and heat resistance. It also complies with PL standards (JHP Y-3189), making it safe for food applications. 3. We use non-migratory materials, so it is fine to use fittings made of ABS and other materials.

• Piping and electrical wiring materials

Since it is a disposable type, it can always be used in a clean condition. There are round and bellows-shaped heads, as well as round and square graduated parts, along with types with a capacity of 0.5 cc and approximately 4 cc, offering a wide variety. For more details, please contact our company.

• others

This product features a silicone sponge tube that excels in high lubricity and wear resistance. A special lubricating resin is applied as a thin film on the surface of the hose (Slip-Up Coat), providing durability against solvents, acids, and alkalis. When bonded to existing pipes using silicone adhesive, it dries within a day and serves as a protective tube.

• glue

- The Calorex 15φ and 30φ can be installed on a 100L reaction vessel equipped with a 1.4 square meter cooler. It prevents solvent vapors from creeping up, increasing cooling efficiency by 30%. The use of Calorex is not limited to glass apparatus; it can also be used with iron pipes, steel, or plastic containers, just like glass. It can be safely and easily handled in factories and laboratories, and it is safe against explosions. - Regarding the wrapping method, it is used by wrapping it around the device, and the wrapping can be loose or tight while maintaining spacing between the tubes. If wrapping around a vertical device, connect it so that the liquid flows from the bottom to the top of the device, with the outlet at the top. When using steam, it should flow from the top to the bottom of the device. When attaching the flat side of the tube to a round container, use heat-resistant adhesive tape to secure the tube. If the tube is used for heating, please stretch the wrapped tube slightly after reaching the desired temperature. It can be connected to any nozzle or nipple for water or steam supply.

• Piping and electrical wiring materials

- It meets similar conditions as the multi-ultra hose, but the outer resin coating is flexible, allowing for good operational handling. - It has flexibility due to the absence of reinforcing threads. The pressure resistance is listed in the catalog, so please consider it before use. - Fluorine tubes have a weakness to bending, but by coating them with resin, a good bending angle can be achieved. (See catalog photo)

• Piping and insulation

Material: Polyethylene Although the cap and inner stopper are integrated, the inner stopper does not turn when the cap is twisted. There is no wear on the bottle or inner stopper due to the adhesion of crystalline, powdered, paste-like substances, or viscous liquids. Dirt can be separated and washed.

• others

- The inner surface is made of fluororesin, so it is not affected by most solvents, including strong acids and strong alkalis. - It is a non-extractable hose, so it does not alter the inner fluid and maintains its purity. - It is a non-adhesive hose, which provides excellent pressure resistance. - It shows strength even after repeated bending.

• others