中部産業 List of Products and Services

MC Nylon Low Profile Heavy Duty Caster with Wheels ■□■Features■□■ ■ Compared to standard casters, it has a lower mounting height and smaller wheel diameter, yet is designed to withstand heavy loads ■ It does not deform significantly even when fixed in place for long periods under heavy loads ■ A type with a lower mounting height and smaller wheel diameter compared to conventional casters, yet capable of withstanding heavy loads; it does not deform significantly even when fixed in place for long periods under heavy loads ■ The swivel section is surface-hardened and heat-treated ■ Sealed ball bearings are used in the wheels ■ Six types of wheels are available to suit different usage conditions ■ Conductive resin wheels (MCD, MCDG) are also available for static electricity prevention ■ For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Steel Plate SST Wheel Caster ■□■Features■□■ ■A product that combines high-quality rubber wheels with SST wheels and steel plate fittings. ■Combines steel plate fittings designed for heavy loads with SST wheels that excel in resilience and wear resistance. ■Lighter starting resistance compared to puncture-proof tire specifications, making it ideal for the towing legs of in-house trailers. ■The wheel part of the SST wheel is made of cast material. This product has been discontinued.

• wagon
• Transportation System
• Other elevators and transport systems

Semi-Pneumatic Wheel Spring Caster ■□■Features■□■ ■ By using the characteristics of the tire and a soft spring, the cushioning effect has been improved compared to conventional models. ■ Utilizing the properties of coil springs provides comfort during startup and high-speed operation. ■ Reduction of noise, alleviation of vibrations and shocks, and decreased starting resistance. ■ In addition to the hardware, high-elastic semi-pneumatic wheels are attached to the wheels that make contact with the ground. * Due to the maximum load being inferior compared to solid wheels, a weaker spring (yellow) has been installed on the 200mm hardware instead of the usual (red) spring, and a dedicated soft spring has been attached to the 150mm hardware. ■ Protection of products during transport ■ Reduction of vibrations ■ Increased cushioning effect ■ For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Semi-pneumatic wheel caster ■□■Features■□■ ■Hollow structure tire compatible with caster wheel fittings ■Compatible with WJ150, WJ200 fittings and WK150, WK200 fittings ■A new type of tire that is puncture-proof yet has cushioning similar to air-filled tires ■While the maximum load for each size does not reach that of puncture-proof tires, it is used for light to medium load hand trucks ■Wheels can utilize the mounting holes of the caster fittings that the user is currently using ■The axle diameter is a standard 20mm, so if the boss width matches, it is possible to replace the current caster with these wheels ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Standard Press Wheels for Medium and Heavy Loads ■□■Features■□■ ■Available in four types, including commonly used rubber and urethane. *Among them is MC nylon, which offers a wide range of compatibility. Please understand the characteristics of each and use accordingly. ■Wheel Selection Points - Starting resistance is lower with higher rebound elasticity, with SST and Jengom being the best. Additionally, for heavy load transport, wheels made of hard MC nylon and urethane perform well. - Wear resistance is generally assessed based on the results of the Akron abrasion test, but it actually varies depending on usage conditions. Generally, MC nylon and urethane are good, followed by SST and Jengom. - In terms of maximum load, MC nylon and urethane excel. - For general use, rubber is the most commonly used, followed by urethane. - Rubber, SST, and Jengom are less resistant to oil. They are not recommended for areas where oil and grease are present on the floor. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Heat-resistant resin wheel caster ■□■Features■□■ ■Superior heat resistance compared to MC nylon wheels Applicable temperature: -50℃ to +260℃ casters ■Uses special phenolic wheels, heat-resistant grease for swivel parts, and Teflon-coated stainless steel bushings for bearings ■Uses special phenolic wheels as heat-resistant wheels, capable of continuous use for 1 hour at -30℃ to +260℃, and for short periods (15 minutes) at +300℃ ■Uses Teflon-coated stainless steel bushings for wheel bearings, ensuring good rotation even under high-temperature conditions ■The fittings use ultra-heat-resistant grease for the swivel parts ■The grease itself can withstand up to +1000℃ in dry conditions and up to +200℃ in other situations ■Fitting materials include both steel fittings and corrosion-resistant stainless steel fittings ■Can accommodate environments that MC nylon wheels could not handle (-40℃ to +120℃). For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

The "Antibacterial Urethane Wheel Stainless Steel Caster" features wheels made of urethane containing antibacterial agents that come into contact with the ground. The antibacterial agents are blended into the urethane, providing excellent antibacterial properties without compromising the inherent characteristics of the urethane. Not only the wheels but also the fittings are made of stainless steel, offering excellent corrosion resistance and enhancing hygiene. Stainless steel 304 is used for the core metal, fittings (including the swivel ball), and bearings. The swivel section allows for smooth movement with a dual-layer bearing and is equipped with a dust cover! 【Features】 ■ Used in environments that require hygiene ■ Wheels made of urethane mixed with antibacterial materials ■ Fittings made of corrosion-resistant stainless steel ■ Suitable as casters for carts in food manufacturing plants, hospitals, and pharmaceutical factories *For more details, please download the PDF or contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Heat-resistant grease specification iron wheel caster ■□■Features■□■ ■Uses iron wheels as heat-resistant wheels, and eliminates bearings to prevent bearing grease leakage at high temperatures, allowing for use under high-temperature conditions. ■The fittings use heat-resistant grease in the swivel part, which can handle temperatures from -10℃ to +200℃ when used in dry conditions. ■The material of the fittings is steel fittings. ■Can be used in most environments where MC nylon wheels could not be used (-40℃ to +120℃). ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Battery-operated lifting table cart ■□■Features■□■ ■This is a lifting cart that operates the pump with a battery-powered electric motor to activate the hydraulic cylinder, allowing the platform to move up and down. ■The elevation of the cart's platform is done electrically. You can control the ascent and descent using two buttons on a handheld remote. ■It is battery-operated and comes with a built-in charger, so it can be charged anytime and anywhere as long as there is AC100V available. Additionally, the battery meter is color-coded in three colors for easy visibility of the remaining charge. ■For safety, it is equipped with a descent adjustment valve and an automatic load check valve. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Table Lift Cart with Roller Conveyor ■□■Features■□■ ■The table lift cart is equipped with a roller conveyor on top, making it easy to bridge to the line's roller conveyor. This is a modification example. ■During transport, a stopper is engaged for safe operation. With the lifting function, it can accommodate conveyor lines of different heights. ■Regarding the work-holding stopper, we designed it so that the stopper can be operated from the handle side, linking the operation lever to bring it closer. Pulling the lever causes the stopper to fall, allowing the load to be removed. When released, it returns via a spring mechanism. For safety, the stopper is always held up by the force of the spring. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

High Lift Type Table Lift Cart (Manual) ■□■Features■□■ Compared to the standard model, the maximum height of the platform rises nearly twice as high. Equipped with a descent prevention valve and a rapid lift device. The platform of the cart can rise and fall nearly twice as much as the standard type, making it suitable for high shelves. However, this means that the position of the descent end is higher. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder through a pump, raising the table. Descent can be stopped at any desired position by loosening the valve. Various functions and safety devices have been added for ease of use. ■Rapid Lift Device By turning the pedal to the left and stepping on it, the lift-up speed doubles. ■Safety Device The descent prevention valve prevents the table from descending rapidly. It is installed on the port of the hydraulic cylinder. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Table Lift Cart - Non-Handle Type (Manual) ■□■Features■□■ ■No handle restriction, making it perfect for lifting long items. ■The non-handle type is ideal for carrying long items. It is compatible with all types and can also accommodate those with bellows. ■The cart's load platform rises and falls, allowing for easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, resulting in less strain. ■Operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Elevating cart with bellows to ensure work safety ■□■ Features ■□■ The cart's loading platform can be raised and lowered, allowing for easy movement from workbenches, conveyors, etc., adjusted to the appropriate height, resulting in less strain. The operation is primarily foot-operated, activating the hydraulic cylinder through a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. The bellows enhance work safety and provide dust protection. It is compatible with all types. Additionally, the bellows can be attached and detached using Velcro. ■ For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Battery-powered lifting and self-propelled table lift cart ■□■Features■□■ ■ It is battery-powered and not only moves the platform up and down but also allows the cart itself to move. ■ The lifting of the cart platform is done electrically, and the movement is also electric. The lifting is controlled by two buttons for raising and lowering on a handheld remote. It is battery-operated and comes with a charger, so it can be charged anytime and anywhere as long as there is AC100V available. Additionally, the battery meter is color-coded in three colors for easy visibility of remaining power. For safety, it is equipped with a descent adjustment valve and an automatic load check valve. ■ The movement utilizes the drive unit "Drive U," making the hand-pushed cart self-propelled. Smooth movement is achieved by simply pressing the start button. It employs a powerful electric brake for stopping. ■ For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

A lift cart with an even lower height than smaller models, making work much easier. ■□■Features■□■ ■The platform of the cart has a minimum height of 80mm, which is significantly lower compared to standard table lift carts. Standard table lift carts have a height of 210mm or more, making this model approximately 30% lower. ■It is ideal for transporting beer bottles and heavy loads from a low position. ■The low-profile table lift is available in three types according to load and platform size, allowing for selection based on usage. The swivel casters come with brakes. ■Operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Elevating cart with lifting function and conveyor for smooth transportation ■□■Features■□■ ■The cart's loading table can be raised and lowered, allowing for easy movement from workstations and conveyors at the appropriate height, reducing strain. ■Operation is primarily done by foot pedal, which activates the hydraulic cylinder via a pump to raise the table. For lowering, the valve can be loosened to stop at any desired position. Various functions and safety devices are included for ease of use. ■Adding a conveyor improves work efficiency and reduces labor. ■Equipped with work guides and stoppers to prevent load shifting. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Standard Mast-Type Table Lift Cart (Manual) ■□■Features■□■ ■The foot pedal raises the platform, and the valve knob controls lowering and stopping. The quick lift mechanism increases the lifting speed by 2 to 3 times. ■The cart's platform is supported by a mast (vertical column) during lifting and lowering, allowing for a lower minimum position compared to regular table lifters, making it easier to load. Additionally, there are no obstacles under the platform except for the front legs, allowing the front legs to fit under shelves and reach deep into the back of the shelf. ■The platform of the cart can be raised and lowered, and can be adjusted to match the height of workstations, conveyors, etc., reducing the burden. The operation is primarily foot-operated, activating the hydraulic cylinder via a pump to raise the table. Lowering can be done by loosening the valve to stop at any desired position. Various functions and safety devices have been added for ease of use. ■Quick Lift Device: Turning the pedal to the left and pressing down doubles the lift-up speed. (Excludes the maximum load type of 200kg) ■Safety Device: Automatic load check valve ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Mast-type Forklift Trolley (Manual) ■□■Features■□■ ■It has a fork design that is optimal for pallet operations. It can be adjusted to slide left and right. ■The fork rises and descends supported by the mast (vertical column), and there are no obstacles under the cargo area except for the front legs, allowing the front legs to be inserted under shelves and reach deep into the back of the shelf. It is ideal for pallet operations. ■The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the fork. Descent can be controlled by loosening the valve, allowing it to stop at any desired position. Various functions and safety devices have been added for ease of use. ■Quick lift device: By turning the pedal to the left and stepping on it, the lift-up speed doubles (except for the maximum load of 200kg type). ■Safety device: Automatic load check valve. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

A lifting cart that achieves a minimum height of 95mm when the platform is lowered, making it easier to load items. ■□■Features■□■ ■The cart's platform rises and falls supported by a mast (vertical column), allowing the lowest position of the platform to be lower and easier to load compared to ordinary table lifters. Additionally, by reducing the diameter of the front leg wheels and modifying the structure, a low height of 95mm can be achieved, making it convenient for transporting box pallets. ■Since the cart's platform table rises and falls, it can be adjusted to match the height of workstations, conveyors, etc., resulting in less strain. The operation is primarily done by stepping on a pedal to activate the hydraulic cylinder via a pump, raising the table. Lowering can be done by loosening a valve, allowing it to stop at any desired position. Various functions and safety devices have been added for ease of use. ■Quick lift device: By turning the pedal to the left and stepping on it, the lift-up speed doubles (excluding the maximum load type of 200kg). ■Safety device: Automatic load check valve. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

A lifter cart that raises the forks by pedaling the handle and can lower or stop them by opening and closing the valve knob. ■□■Features■□■ ■The forks of the cart can be raised and lowered, allowing for movement between shelves at the appropriate height, resulting in a lighter load. ■The operation primarily involves pedaling the handle to activate the hydraulic cylinder via a pump, raising the forks. The descent can be controlled by loosening the valve, allowing it to stop at any desired position. Various functions and safety devices have been added for ease of use. ■Quick lift device: By switching modes, the lift-up speed doubles. ■Safety device: Automatic load check valve. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Battery-operated electric pump drives the hydraulic cylinder, allowing the platform of the cart to move up and down. ■□■Features■□■ ■The cart's platform table rises and falls electrically, making it easy to adjust the height for moving items from workbenches, conveyors, etc., resulting in less strain. The operation is primarily done with a one-touch lever to raise and lower the table. Additionally, the rise speed can be controlled by a soft mechanism. Various functions and safety devices are included for ease of use. ■The charger is mounted on the vehicle, allowing it to be charged anywhere as long as there is a power source. AC100V charging. ■The remaining battery level is displayed on a three-color meter. ■Safety device: Automatic load check valve. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

Battery-operated electric pump drives the hydraulic cylinder, allowing the lift cart to move the platform up and down. ■□■Features■□■ ■The forks of the cart can rise and fall, making it easy to move between shelves at different heights with minimal effort. ■Operation is primarily done by pressing the rise and fall buttons, which activate the hydraulic cylinder via the pump to raise or lower the forks. The forks will stop at the position where you release the button. Various functions and safety devices are included for ease of use. ■Equipped with a charger, it can be freely charged wherever there is a power source. Comes with a 2m cord reel. AC100V. ■Battery level is displayed using a three-color indicator. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

We will manufacture according to the size of the cart. Depending on the cart, we can also modify the frame, so please consult with us.

• wagon
• Transportation System
• Other elevators and transport systems

We will manufacture carts tailored to your cargo and requirements. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

We will manufacture it to match your cylinder. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

This is a maneuverable towing cart that follows almost the same path as the towing vehicle when towed. ■□■Features■□■ ■Can tow several units and turn in narrow aisles ■Custom-made sizes to match the load ■Tires: UT.350-5 Carry Ace (high-class tires effective for noise and vibration) ■Long size capable of transporting two pallets simultaneously Can be manufactured in any size to match the dimensions of the load. Can accommodate load capacities from 500 kilograms to 10 tons (depending on specifications). ■For more details, please download the catalog or contact us.

• wagon
• Transportation System
• Other elevators and transport systems

We will create it in the size you desire. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

We can manufacture according to the size and height of the products to be loaded. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

We can manufacture according to the size of the cargo. It can also be used as a base chassis for mounting. Please consult us first.

• wagon
• Transportation System
• Other elevators and transport systems

We will create it according to the size, product, and load. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

We will manufacture according to the weight and size of the cargo. Please contact us first.

• wagon
• Transportation System
• Other elevators and transport systems

Please let us know the size, weight, and shape of the items to be loaded. We will create according to your requests. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

Irecta Pipe Compatible 4WS Unit A hand-pushed cart made from Irecta pipes can be modified to a 4WS cart by attaching the Irecta pipe compatible 4WS unit. This allows it to closely follow the towing vehicle and travel along almost the same path. It enables stable operation in narrow curved passages. ■□■ Features ■□■ ■ Casters: 4 swivel casters with 100mm wheels ■ The Irecta pipe compatible 4WS unit has all four wheels equipped with swivel casters, and the turning mechanism is connected by rods in all directions, allowing the front and rear wheels to follow almost the same path. ■ If you want to use it as a hand-pushed cart, it is possible by releasing the front and rear wheels. * Carts equipped with this mechanism can also be manufactured. ■ For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

We will manufacture to your specified dimensions. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems

□Features□ Various applications from transporting soil at factories, construction sites, farms, to transporting goods. The tire size is 13x3 (3.00-8).

• wagon
• Transportation System
• Other elevators and transport systems

□■Features■□ The resin deck and silent casters use recycled materials that guarantee strength. The anti-slip rubber plugs are made from recycled rubber, and the cushioning rubber is designed safely with olefin resin. The cushioning rubber is standard in only two types: PLA300G and PLA300G-DX. The handle coating is a powder coating that does not use organic solvents. The bolts and nuts for the caster and handle installation have been changed from hexavalent chromium to non-toxic trivalent chromium. It features an environmentally friendly silent design (40db).

• wagon
• Transportation System
• Other elevators and transport systems

□Features□ Equipped with air-filled tire casters on a two-tier shelf cart. Plastic cart.

• wagon
• Transportation System
• Other elevators and transport systems

■□■Features■□■ ■Adopts specially treated parts in the swivel section ■Structure that can withstand large impacts and long-term loads ■Uses thrust bearings and tapered roller bearings in the swivel section ■Wheels made of wear-resistant, high-elasticity polymer cast nylon material ■Uses sealed radial bearings in the wheels ■Achieves quiet and smooth rotation without the need for additional grease injection ■Uses thick plates for fittings (mounting base plate/fork plate)

• wagon
• Transportation System
• Other elevators and transport systems

This caster was developed with the theme of eliminating the "thick and heavy metal parts" and making the "metal parts thin, light, and strong." ■□■Features■□■ The "super special high-strength steel plate" has about 3.5 times the strength of ordinary steel of the same thickness. It is also suitable for towing, with a speed of 4 km/h. The wheel part uses highly durable materials.

• wagon
• Transportation System
• Other elevators and transport systems

The cylinder cart is, as the name suggests, a cart specifically designed for cylinders. It utilizes the principle of leverage, with the wheels as the fulcrum and the handle side as the point of force, allowing the load to be placed on the scooping plate at the action point. ■□■Features■□■ ■Foldable and space-saving when not in use ■Easy to transport cylinders using the lever principle ■Maneuverable, making it suitable for narrow corridors with tight turns *We also offer a single-cylinder stacking type. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

The cylinder cart is, as the name suggests, a cart specifically designed for cylinders. It utilizes the principle of leverage, with the wheels as the fulcrum and the handle side as the effort point, allowing the load placed on the scoop plate to be lifted easily. ■□■Features■□■ ■Foldable for space-saving when not in use ■Easy to transport cylinders using the lever principle ■Maneuverable, making it suitable for narrow corridors with tight turns *We also offer a two-cylinder stacking type. ■For more details, please contact us.

• wagon
• Transportation System
• Other elevators and transport systems

□Features□ This is a puncture-free tire that is slightly softer than the typical type.

• wagon
• Transportation System
• Other elevators and transport systems

Dimensions and specifications can be customized according to your preferences. Please consult with us first.

• wagon
• Transportation System
• Other elevators and transport systems