サンワ・エンタープライズ List of Products and Services

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-60AL Effective Air Width: 600mm Overall Length: 635mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features approximately 3,000 items on the concept of "See," "Touch," "Compare," and "Confirm," showcasing plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Air compressors, blowers and pumps

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-45AL Effective Air Width: 450mm Overall Length: 482mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Air compressors, blowers and pumps

Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in widths ranging from 150mm to 900mm, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-30AL Effective Air Width: 300mm Overall Length: 330mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features around 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "see," "touch," "compare," and "verify." It is located in the TFT Building, close to Tokyo Big Sight, making it convenient to stop by while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto Ward, Ariake 3-6-11, TFT Building, East Wing, 8F

• Air compressors, blowers and pumps

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. Model: 750-15AL Effective Air Width: 150mm Overall Length: 180mm Pipe Connection: R1/4 -------------------- The Ariake Satellite Showroom features approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, near Tokyo Big Sight, making it easy to visit while attending exhibitions. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Air compressors, blowers and pumps

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing away debris. Model: 750-7.5AL Effective Air Width: 75mm Total Length: 102mm Pipe Connection: R1/4 ーーーーーーーーーー The Ariake Satellite Showroom features around 3,000 items, including plastic piping components and pneumatic equipment that can be used simply by connecting compressed air, based on the concept of "seeing," "touching," "comparing," and "confirming." It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 〒135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8F

• Air compressors, blowers and pumps

The Line Blow is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions, for applications such as water drainage, drying, and blowing off. The Ariake Satellite Showroom, based on the concept of "seeing," "touching," "comparing," and "confirming," displays approximately 3,000 items, including plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. It is conveniently located in the TFT Building, close to Tokyo Big Sight, making it easy to stop by while attending exhibitions. ▼ Access 〒135-0063 3-6-11 Ariake, Koto-ku, Tokyo, TFT Building, East Wing, 8th Floor

• Air compressors, blowers and pumps

The features of the Sanwa pneumatic equipment "Blow" series are that it generates an amplified flow by incorporating surrounding air in addition to compressed air. It is effective for various applications such as air curtains, water drainage, drying, and blowing away cutting chips, contributing to improvements in manufacturing processes. ーーーーーーーーーー The Ariake Satellite Showroom is based on the concept of "seeing," "touching," "comparing," and "confirming," showcasing approximately 3,000 items of plastic piping components and pneumatic equipment that can be used simply by connecting compressed air. The location is in the TFT Building, close to Tokyo Big Sight. It is convenient to stop by while attending an exhibition. ▼ Access 135-0063 Tokyo, Koto-ku, Ariake 3-6-11, TFT Building, East Wing, 8th Floor

• Air compressors, blowers and pumps

The conveyor bag does not use mechanical parts such as fan motors and can operate solely on compressed air as its source. Since there are no obstacles in the flow path, it can easily suck in water and debris without any issues, which raises the possibility of using it for the removal of pumice stones that are covering the seas of Okinawa and causing damage. We decided to test this out. <Product Introduction> The conveyor bag is one of Sanwa's pneumatic equipment, which has been chosen in manufacturing sites for nearly 40 years, with the keyword "just connect compressed air." By simply connecting compressed air, it generates a powerful vacuum and is applied in air transportation systems. Usage Examples: - It can suction, transport, and discharge not only gases and powders but also metal fragments and steel balls used for shot blasting. - Since it has no moving parts and does not use electricity at all, it is effective for transporting and exhausting dangerous gases or mists.

• Material handling systems and equipment

The EJ hose band is an all-plastic hose band designed to secure tubes and fittings. It is installed around the outer circumference of the tube inserted into the fitting, and by crimping both ends of the hose band with pliers or similar tools, it tightly and evenly compresses the tube. This prevents twisting of the tube, which can cause leaks, and allows for a uniform, gap-free tightening. It is available in a range of sizes from a minimum of 5.6mm to a maximum of 45mm, with a total of 16 sizes in the lineup. It is ideal for securing flexible tubes and fittings made of soft PVC, silicone, and various types of rubber. *Hose clamp, tube band, tube clamp

• Packaging materials

The Kolder is a simplified spot cooler that applies the principle of vortex. Without using power supply or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, for model 190-75SV) just by connecting compressed air. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it shows excellent effects particularly in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Additionally, the cooling effect on workpieces and tools leads to improved cutting speeds and extended tool life, making it particularly suitable for dry cutting of materials like magnesium alloys. Furthermore, it is effectively used as a cooling source for various spot cooling applications, such as preventing heat-related issues in electrical control boxes and various measuring instrument boxes, cooling molds, and cooling tests for semiconductors and PC boards. *For more details, please refer to the basic information and downloadable materials at the bottom of the page.

• Air compressors, blowers and pumps

The "Stay Hose" is a blow nozzle hose that allows for free positioning without the use of tools. It is an ideal product for precise positioning of blow nozzles on the worksite, as it enables "bending, returning, and holding" without the need for tools.

• Work tools

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating of electronic devices. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Cooling system

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in selecting products. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Heat and Drying Treatment Systems

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles as a vacuum system or a powerful air blow device.

• others

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly at 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Air compressors, blowers and pumps

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transfer and exhaust of gas and mist.

• Material handling systems and equipment

The compact and easy-to-operate Sanwa pneumatic equipment, including the ultra-low temperature air generator "Kolder" with nearly 40 years of proven performance, contributes to environmental improvement and productivity enhancement in various manufacturing sites.

• Air compressors, blowers and pumps