成瀬化学 List of Products and Services

"Narushito Coating Waterproofing" is a modified asphalt sheet cold application method that does not use any organic solvents or open flames. To improve the workability of the Narufalto coating sheet method, "Narushito N" is used instead of non-woven fabric for the floor. It complies with JIS A 6013 modified asphalt roofing. 【Features】 ■ Environmentally friendly ■ Safe with no toxicity or flammability ■ Adhesion to wet substrates ■ High waterproofing capability due to asphalt ■ Followability to substrate expansion and contraction *For more details, please refer to the PDF materials or feel free to contact us.

• Waterproof sheet

"Naruburikku" is a one-component adhesive for brick blocks that is easy to work with. The material is an environmentally friendly water-based polyethylene resin, and it can be applied even on damp surfaces. It is highly weather-resistant, so any excess will not discolor. The nozzle at the tip allows for optimal application, and since it comes in a laminate tube, it can be stored without using it all at once. [Features] ■ Environmentally friendly water-based polyethylene ■ Suitable for bonding brick blocks and brick tiles ■ One-component for easy application ■ Strong weather resistance, with no discoloration of excess ■ Contains no organic solvents, and is non-toxic and non-flammable *For more details, please refer to the PDF document or feel free to contact us.

• glue

We would like to introduce the "Narcise N Composite Method." The "Narcise N" used in this method complies with the modified asphalt roofing standard JIS A 6013. "Narcifalt WP" is a water-based single-component product that does not use organic solvents, and since the film dries and hardens, it does not contain any substances of health concern. In the case of renovation work for rooftop waterproofing where the existing waterproofing has an exposed asphalt finish, the compatibility of similar materials, along with the reliability of asphalt waterproofing, is highly regarded. 【Features】 ■ Combines toughness and water tightness ■ Covers the weaknesses of modified asphalt adhesive sheets ■ Simplifies the structure of upstands ■ Can be adapted to the specifications of the Ministry of Land, Infrastructure, Transport and Tourism ■ Complies with JIS A 6013 modified asphalt roofing standard *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof sheet

The waterproof layer regeneration method "Narlight Injection Method" is a technique that creates a waterproof membrane between the pressure layer and the slab concrete without removing the pressure layer. By injecting a special resin into the gaps between the pressure concrete and the waterproof layer, as well as between the slab and the waterproof layer, it blocks the pathways for water intrusion and cracks in the structure, thereby regenerating the deteriorated waterproof layer to a sound condition. The asphalt waterproof layer adopted during construction remains in good condition even after 30 years, and there is still ample potential for its continued use. Additionally, under the protective specifications of asphalt waterproofing, the injected special resin is shielded from UV rays and heat by the protective layer, allowing for long-term durability. The Narlight Injection Method addresses the above challenges, enabling a reduction in the frequency of lifetime renovations, a decrease in CO2 emissions, and a reduction in running costs. *For more details, please download the materials or contact us.

• Waterproofing work

Have you ever had a "scary" experience on ramps or stairs in factories or warehouses? The "slipperiness" of work sites, such as metal plates, tiled floors, resin floors, wet areas, and frozen surfaces, can be easily solved with 'Nalg Grip'! It comes in a tube type that allows you to use only the necessary amount without waste, and it takes effect with just one application. You can easily implement powerful slip prevention measures. ★ If you would like a free sample, please feel free to apply through the [Contact Us] section. 【Features】 ■ Creates a strong, rough surface just by applying ■ One-component type that requires no measuring or mixing before application ■ Water-based material that does not use volatile organic compounds that cause irritating odors ■ Effective in tough working environments where forklifts pass ■ Easy pattern painting and sign marking with paint sheets 【Color Lineup】 Gray / Yellow / White (NEW) / Green (NEW) → In response to requests, we have added White and Green colors! * You can view the catalog and case study materials from the [PDF Download] section.

• others

A powerful anti-slip agent "Narg Grip" that can be applied to damp concrete and asphalt. We will introduce the application method, quality standards, usage amounts, properties, and packaging. When using masking tape to paint lines, clean off dust and rust stains, and wipe with water, then seal the edges. Spread this agent with a spatula and let it dry for more than 24 hours. After drying, remove the tape and clear away any debris, and the anti-slip line is complete. Additionally, we provide information on "how to paint patterns using paint sheets" and quality standards. 【Application Points】 ■ When used for vehicles, "pattern application" provides stronger grip than "full surface application." ■ Apply over a wide area in places with high loads, such as vehicle traffic. ■ In areas with many pedestrians, gray is recommended as the surface tends to get dirty easily with black. *For more details, please refer to the PDF document or feel free to contact us.

• paint

Have you ever experienced slipping on a water-soaked corrugated steel plate ramp/platform, tiled floor, resin floor, or corrugated steel stairs? Solve it easily with 'Naru Grip'! It comes in a tube type that allows you to use only the necessary amount without waste, enabling easy and smooth application for powerful slip prevention measures. ~ Free trial samples are currently available ~ 【Features】 ■ Just apply it from the tube to create a strong, rough surface ■ One-component type that does not require measuring or mixing before application ■ Water-based material that does not use volatile organic compounds that cause irritating odors ■ Effective even in harsh environments where forklifts operate ■ Easy pattern painting and signage possible with paint sheets 【Color lineup】 Gray / Yellow / White (NEW) / Green (NEW) → In response to requests, we have added White and Green colors! * Product catalog and case study materials can be viewed by clicking the "PDF Download" button below. * If you would like a free sample, please feel free to request it via the "Contact Us" button.

• paint

This document explains the waterproof layer regeneration method using Narulight injection (special resin injection method). This method involves pressing "Narulight" into the gaps above and below the waterproof layer to fill all the gaps with Narulight. It blocks all water entry points and regenerates the deteriorated waterproof layer to a healthy state. The document includes information on the components and features of Narulight, standard construction procedures, and guidelines for injection quantities. Please make use of it. [Contents (partial)] ■ Components of Narulight ■ Features of Narulight ■ What is the waterproof layer regeneration method? ■ Features of the waterproof layer regeneration method * For more details, please refer to the PDF document or feel free to contact us. * The catalog is a digest version. If you would like the full document, please contact us directly for mailing arrangements.

• Waterproofing work

"Naru Stop" is an economical and easy-to-use cartridge-type water-based asphalt joint sealing agent. Unlike traditional water stop board methods, it can be applied independently, significantly improving work efficiency. As a paste-type sealing material, it thoroughly penetrates the fine irregularities of existing concrete. 【Features】 ■ Long application distance per unit makes it economical ■ Can be used independently, greatly reducing construction time ■ Effectively guards against water intrusion through chemical reactions with concrete ■ Can be applied outside of rebar, providing expected rust prevention effects *For more details, please refer to the PDF materials or feel free to contact us. *The catalog is a digest version. If you would like the full materials, please contact us directly for mailing arrangements.

• Waterproofing Agent

This document summarizes the products of Naruse Chemical Co., Ltd., which manufactures emulsion-based waterproofing agents, injection agents, and adhesives, in a table format. It includes a total of 23 products, starting with the modified asphalt-based cold waterproofing "Narufalt WP," as well as blister prevention base adjustment material "Narubrid B" and waterproof substrate adjustment material "Narujast P." Please take a look. 【Contents】 ■ Photos ■ Classification ■ Product Name ■ General Properties (e.g., main components, viscosity, solid content, specific gravity, appearance) ■ Packaging *For more details, please refer to the PDF document or feel free to contact us.

• Heat-shielding materials

The water stop agent "Narustop" provided by Naruse Chemical is a caulking type water stop agent for concrete joints. It adheres strongly to concrete and waterproofs and stops water at the concrete joint interface. The application is also easy, and it demonstrates excellent effectiveness in preventing water leakage accidents. ~ A free booklet that explains "foundation waterproofing" in detail is currently available! ~ For those considering the purchase of a new house or single-family home, we provide an easy-to-understand explanation of "foundation waterproofing." If you would like the booklet, please contact us and indicate "booklet request." * A manual for single-family foundation construction is also available for download in the catalog. * For more details, please download the catalog or contact us directly.

• Concrete sheet piles and piles

"Nalfalt Top Hard" is a high-durability finishing paint for exposed waterproofing layers, featuring a special polyethylene-based emulsion type coating with excellent water resistance, weather resistance, and adhesion. We offer two types: "High Durability P" with a viscosity of 20,000 cps and "High Durability S" with a viscosity of 25,000 cps. 【Features】 ■ Main ingredients: Polyethylene acrylic emulsion, aggregate ■ Viscosity: (P) 20,000 cps (S) 25,000 cps ■ Solid content: (P) 65% (S) 67% ■ Specific gravity: (P) 1.5 (S) 1.2 ■ Appearance: Gray water-based emulsion ■ Packaging: 20 kg poly pail *For more details, please refer to the PDF document or feel free to contact us.

• Humidity control materials

When applying waterproofing directly to a concrete substrate, even with careful attention to the moisture content of the substrate, it is common for blisters to occur in the waterproof layer during the summer, leading to the need for repairs. "Nalbrid B" is a substrate adjustment material with heat insulation properties. By simply applying this product to the substrate for liquid waterproofing or sheet waterproofing, you can prevent blistering phenomena during the summer while simultaneously forming an insulating layer. 【Features】 ■ The temperature of the coating is 5 to 10°C lower than the outside temperature ■ Prevents blistering of the waterproof layer due to vapor from the substrate ■ Excellent adhesion to various substrates such as concrete and asphalt ■ Adhesion does not decrease even when the substrate is damp ■ Being a single-component product, it requires no mixing and is easy to use ■ Can be stored economically even if not all of it is used at once *For more details, please refer to the PDF document or feel free to contact us.

• Heat shielding sheet

"Narujasuto P" is a water-based polyethylene primer for substrate preparation. It is made from a polyethylene emulsion and aggregates, and does not use cement, which means it does not generate dust. Additionally, it has waterproofing properties, which shortens the curing time after rainfall and can reduce construction time. The formed adjustment layer has the ability to relieve vapor pressure generated from the substrate. 【Features】 ■ No need for weighing, mixing, or stirring, and no issues arise from these processes ■ No dust generation since it does not use cement ■ Does not fall under the specific chemical substance hazard prevention regulations ■ Exhibits good adhesion even in slightly damp conditions when applied to concrete substrates ■ Has waterproofing properties, which shortens the curing time after rainfall and reduces construction time ■ The formed adjustment layer has the ability to relieve vapor pressure generated from the substrate *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work

"Narustop" is a joint water stop agent that utilizes the adhesive properties and waterproofing of water-based asphalt emulsion. Since it does not use any organic solvents, it is non-toxic and non-flammable, allowing for seamless application. It does not expand, so it will not damage the concrete. 【Features】 ■ High-viscosity asphalt water-based emulsion ■ Can be applied to uneven surfaces (chipped surfaces), cast-in-place surfaces, and damp substrates ■ Strong adhesion to existing concrete and newly poured concrete ■ Easy and inexpensive to apply ■ Seamless application is possible *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing Agent

"Narcisheet N Composite Waterproofing" is a composite waterproofing system that maximally utilizes the advantages of modified asphalt sheets (Narcisheet N) and modified asphalt emulsions (Narfalt WP). It is a method that does not use open flames, eliminating the risks of fire and poisoning, allowing for safe construction even in enclosed environments such as indoors. Furthermore, it has excellent adhesion to most substrates (mortar, concrete, metal sheets, asphalt, urethane, rubber, etc.), making it easy to apply in complex areas, vertical surfaces, and at the edges of the waterproofing layer. 【Features】 ■ Completely safe as it does not use organic solvents or open flames ■ High waterproofing performance and strong adhesion ■ Can be applied even on damp substrates ■ The waterproofing layer is flexible and elastic, providing excellent adaptability to substrate expansion and contraction *For more details, please refer to the PDF materials or feel free to contact us.

• Waterproof sheet

We would like to introduce the coating waterproofing exposed method "Nalfalt WP-S." It does not use any substances prioritized by the Healthy Housing Research Association, such as formaldehyde, toluene, or xylene, nor any substances established by the Ministry of Health, Labour and Welfare guidelines. As it is a one-component water-based emulsion, there is no need to mix two components, eliminating issues related to improper mixing. Furthermore, it can be easily applied using a roller, brush, or spraying machine. 【Features】 ■ Safe and pollution-free work as it does not use any flammable materials or organic solvents ■ No need to mix two components due to its one-component water-based emulsion ■ Exhibits strong adhesion to steel plates ■ Can be used as a substitute for anti-corrosion paint ■ Blocks solar radiation affecting the roof, mitigating temperature rise inside the building (in heat-insulating specifications) *For more details, please refer to the PDF document or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material

"Narfalt Top - Heat Shield" is a solar heat reflective paint that blocks solar radiation reflected from the roof, mitigating the rise in internal building temperatures. By containing high-reflectivity special pigments (such as ceramics), it exhibits high reflectivity. In summer, the temperature on the underside of the roof decreases by 10°C to 20°C. Additionally, by suppressing the leaching of water-soluble components from the paint film due to early rainfall during the drying phase, it has reduced foam in drainage and the increase in COD values. 【Features】 ■ Outstanding heat shielding effect significantly enhances cooling efficiency ■ Reduction of leaching of water-soluble components from the paint film ■ Water-based single-component type, ensuring high safety and environmental consideration *For more details, please refer to the PDF document or feel free to contact us.

• Heat-shielding materials

"Narufaruto Top" is an acrylic emulsion-type paint that serves as a protective finishing material for exposed waterproof layers, excelling in water resistance, weather resistance, and adhesion. "Narufaruto Top S" is a paint containing aggregates that can follow the expansion and contraction of waterproof materials and allows for light foot traffic. Additionally, "Narufaruto Top P" is designed with good water resistance and excellent adhesion to asphalt-based waterproof layers, incorporating weather-resistant pigments into an acrylic emulsion, making it a paint-type protective finishing material. 【Features】 ■ Acrylic emulsion type ■ Excellent water resistance, weather resistance, and adhesion ■ Available in options for light foot traffic and non-traffic use *For more details, please refer to the PDF materials or feel free to contact us.

• Waterproofing work

"Narucourt CP" is a special polyethylene-based emulsion developed by Naruse Chemical using new technology. It is a water-based type that possesses excellent corrosion resistance, has outstanding elongation properties, and offers waterproof performance. It does not contain organic solvents and does not use any raw materials that fall under environmental hormone substances such as bisphenols. 【Features】 ■ Water-based type that does not contain volatile organic compounds (VOCs) ■ Equipped with excellent corrosion resistance that sufficiently meets corrosion technology standards ■ Can be applied even if the underlying concrete is wet ■ Due to its drying and curing type, it can be applied without worrying about usable time ■ Environmentally friendly *For more details, please refer to the PDF materials or feel free to contact us.

• Reinforcement and repair materials

"Narucourt JW" is a polyethylene-based emulsion developed by Naruse Chemical using new technology. Despite being water-based, it possesses excellent corrosion and waterproofing properties. It is solvent-free and does not use any raw materials that correspond to environmental hormone substances such as bisphenol A, making it a product considerate of environmental measures and the workers involved. 【Features】 ■ Water-based type that does not contain volatile organic compounds (VOCs) ■ Equipped with excellent corrosion resistance that sufficiently meets the guidelines for corrosion protection technology ■ Can be applied even when the substrate concrete is damp ■ Viscosity that allows for smooth work ■ Environmentally friendly *For more details, please refer to the PDF document or feel free to contact us.

• Humidity control materials

"Narsilver Neo" is a concrete block adhesive that has been beloved for many years as an adhesive for concrete parking blocks and gardening bricks, developed by applying the technology accumulated with Narlcoat to the existing "Narsilver." Thanks to the elasticity of polyethylene, impact resistance has been improved. The resin used is a polyethylene resin that is safe and environmentally friendly, rather than petroleum-based products. We also offer "Narsilver Mini," which comes in a box of 40 tubes of 350g each. 【Features】 ■ Improved adhesive strength, water resistance, and durability ■ Enhanced impact resistance due to the elasticity of polyethylene ■ Reduced drying and curing time ■ Conventional functions such as single-component, water-based, and safety remain unchanged *For more details, please refer to the PDF document or feel free to contact us.

• Interior and exterior bricks

"Naru Park" is an adhesive suitable for bonding concrete blocks such as curbs, pedestrian-vehicle boundaries, and central reservations to asphalt and concrete substrates. It comes in a laminated tube, allowing for storage even if not all of it is used at once, making it economical. Since it contains no solvents, it is non-toxic and non-flammable. 【Features】 - One-component type that requires no mixing - Can be applied even if the substrate is damp - Contains no solvents at all - Economical as it can be stored even if not all is used at once *For more details, please refer to the PDF document or feel free to contact us.

• Interior and exterior bricks

"Nalfalt WP" is a water-based emulsion type waterproofing agent made by modifying asphalt with rubber. By simply applying it in its concentrated form, a waterproof membrane is formed through natural drying. Once the waterproof membrane is formed, it will not dissolve again. It adheres strongly to the substrate and forms a tough and durable elastic membrane, making it a product with excellent workability and safety. 【Features】 ■ Non-toxic and non-flammable, safe to use ■ One-component water-based emulsion ■ High waterproofing and strong adhesion ■ Can be applied even on damp substrates ■ Excellent flexibility *For more details, please refer to the PDF document or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material

"Narufaruto C" is a liquid made by dissolving the same asphalt used for waterproofing concrete roofs in water. When this liquid is mixed in appropriate amounts into fresh concrete and stirred, the poured concrete exhibits waterproofing and anti-corrosion properties, and the concrete that demonstrates these properties has improved durability. [Features] - Waterproofing and anti-corrosion of concrete structures - Suppression of crack formation in concrete - Moisture-proofing and dust-proofing of concrete - Prevention of salt damage, freezing, and efflorescence in concrete - Improved durability of concrete - Significant cost reduction in construction expenses *For more details, please refer to the PDF materials or feel free to contact us.

• Concrete admixture

The "Waterproof Layer Restoration Method" does not simply involve applying sheets or waterproof membranes to leaking areas or filling cracks with resin. It involves injecting a material called Narulight into the gaps between the pressure concrete and the waterproof layer, as well as between the slab and the waterproof layer, effectively sealing off the pathways for water intrusion and leakage. Additionally, the "Through Injection Method" involves drilling through the walls or floor concrete of a basement and injecting Narulight from the outside of the building. Narulight utilizes external soil pressure and water pressure to form a waterproof membrane on the exterior. At the same time, Narulight fills the leaking cracks due to water pressure, completely stopping the leakage. 【Features (Waterproof Layer Restoration Method)】 ■ No industrial waste is generated ■ Complete water stoppage can be achieved with partial repairs ■ Work is completed in a very short period ■ There is almost no noise during work ■ It adheres to asphalt and urethane waterproofing ■ Low cost *For more details, please refer to the PDF document or feel free to contact us.

• Waterproofing work

"Narufaruto A" is a one-component adhesive in a water-dispersible emulsion primarily composed of asphalt. It strongly adheres to various substrates, mortar, and concrete, and is non-toxic and free from flammability risks due to being solvent-free. At the same time as bonding, it forms a waterproof layer, demonstrating waterproofing effects. It can be applied even when the substrate is damp. 【Features】 ■ Provides strong adhesion while exhibiting waterproof properties ■ Bonds even when the substrate is wet ■ Easy application with a brush, trowel, or roller ■ Does not require skilled labor ■ Non-toxic, no flammability risks, and easy to handle *For more details, please refer to the PDF document or feel free to contact us.

• glue

The basic structure of the foundation for detached houses consists of a flat foundation with vertical concrete installed. The joints created during this process pose a risk of rainwater intrusion. This time, we will introduce a cartridge-type joint water stop agent that allows for easy, inexpensive, and reliable waterproofing.

• Waterproofing Agent