シーピーアイ List of Products and Services

The air-operated telescopic mast is an aluminum mast that can be extended and retracted by injecting and releasing air. The mast is made of lightweight aluminum alloy tubes that have been anodized, making them resistant to corrosion and highly durable. The number of sections can vary from 2 to 14, depending on the height when extended or retracted and other specifications. Models with a locking mechanism for each section can be locked at any section or in between, allowing the mast to be fixed at the desired height, which will be maintained even after releasing the air. Smaller models can be extended using a manual pump, so no power supply is required. By opening the air release valve and letting the air out, the mast will slowly descend (retract) under its own weight. Therefore, no power supply is needed for retraction in emergencies, and it can be retracted even during a power outage. Since there are no mechanisms or mechanical parts such as motors, wires, or pulleys, there are no troubles caused by failures of these components, and special maintenance is not required. It is also safe as the mast will slowly descend under its own weight even if the air hose is disconnected.

• Elevator installation work
• Floodlight
• Signs, banners, lanterns, and curtains

Eureka DDR4 2933 is a DDR4 DIMM/SODIMM function tester for memory distributors and module manufacturers, capable of testing DDR4 RDIMM (x4, x8), UDIMM (ECC/Non-ECC), SODIMM (ECC/Non-ECC), VLP-RDIMM, LRDIMM, and BGA chips.

• others

The SN-12 is a 1-to-11 PCIe/NVMe M.2 duplicator that can copy the content of a master M.2 device to 11 NVMe M.2 SSDs at high speed simultaneously. It supports various copy modes, including full copy and brief copy, to meet diverse copying needs, and it also allows for data erasure and formatting. Copy logs can be displayed on the screen and saved to a USB drive.

• others

Ez-SPD is an SPD EEPROM programmer specifically for DDR, DDR2, DDR3, DDR4, DDR5, UDIMM, RDIMM, and SODIMM.

• others

The MX4 is the latest NVMe interface M.2 device duplicator, featuring high-speed copying approaching 10GB per minute, compact and lightweight design for excellent portability, ease of use with a full-color touchscreen, and equipped with USB 3.0 / 2.0 ports, meeting various duplication needs for M.2 devices.

• others

The M1500-USB/M5116-PR/M5132-PR is a USB duplicator that can copy the contents of a master USB drive to multiple target USB drives at once. The M1500-USB can copy/verify the contents to 7 USB drives at a time, the M5116-PR to 15 drives, and the M5132-PR to 31 drives, while also allowing for erasing (data deletion) and formatting of the target drives. These three models can operate as standalone devices or can be connected to a KVM (keyboard, video monitor, mouse) for GUI operation. They also support USB 3.1/2.0, and can copy at a speed of 3GB/min with USB 3.0 drives (actual speed depends on the speed of the drives used).

• others

The UHA series is a HDD/SSD duplicator with SATA-1/2/3 interfaces that can copy (duplicate) the content of a master drive to multiple target drives at once. The effective copy speeds reach 219MB/sec for HDDs and 280MB/sec for SSDs, allowing for the fastest copying of a 500GB HDD in about 38 minutes and a 256GB SSD in about 15 minutes (copy speeds may vary depending on the drives used). This device operates as a standalone unit, but when connected to a PC via a serial (RS-232) interface, it allows for monitoring of operational status as well as the display and saving of copy logs, which are effective for production management. The increase in HDD/SSD capacity raises the time required for content copying, becoming a bottleneck in production lines. The UHA series HDD/SSD duplicator contributes to improved productivity with features such as accelerated copy speeds and a BRIEF copy mode that allows copying only the data excluding free space.

• IoT
• others

The DW-121 is a 1-to-1 duplicator designed for small-scale duplication and backup of hard disks with IDE and SATA interfaces. This device is compact and lightweight, making it easy to carry and suitable for maintenance in the field.

• IoT

The content of the master SD card or master image file can be copied to up to 7 (M1500-SD), 15 (M5500-16), or 31 (M5500-32) SD/microSD cards at the shortest time possible. In addition to standalone operation using button controls on the front panel and an LCD display, connecting a KVM (keyboard, video monitor, mouse) allows for operation that maximizes the rich features while viewing a large external display. In addition to executing numerous jobs such as copy/verify/erase/format/test provided as standard, it is also possible to edit and create new jobs by replacing/inserting/deleting commands, as well as displaying logs and outputting them in CSV format. The duplication software, which operates on Linux with a built-in PC and HDD, can be controlled from other PCs on the network, and an automated production system using robots is also available.

• others
• Other PCs and OA equipment

The VITEC VM4-C9 board is designed for demanding video applications, providing extremely high-quality HD and SD H.264 encoding at up to 1080p 30 (SDI & HDMI). The compact and low-power VM4-C9 is ideal for industrial applications. The VM4-C9 card and SDK, using a new framework called Dorsalista, allow for application development on Windows or Linux OS.

• others
• Security cameras and surveillance systems