Structural calculation software(ss) - List of Manufacturers, Suppliers, Companies and Products | IPROS

Structural calculation software Product List

61～65 item / All 65 items

Displayed results
Structural Calculation Software Example | RC Construction 2-Story Children's Welfare Facility

Structural Calculation Software Example | RC Construction 2-Story Children's Welfare Facility

X-direction frame structure with Y-direction partially seismic-resistant walls! The foundation structure adopts a pile foundation.

We would like to introduce an example of the structural calculation software 'Super Build/SS7' used for a two-story children's welfare facility made of reinforced concrete (RC). This building primarily serves as a children's center and after-school club. To consider the surrounding environment and segment the volume, the roof is arranged to have four independent sections. A notable feature is that different roof levels have been set to satisfy the required ceiling heights for each room. Additionally, the second-floor area includes an external terrace that connects the sections around a central courtyard atrium. 【Example Overview】 ■ Purpose: Children's welfare facility, etc. ■ Structural Type: Reinforced Concrete (RC) ■ Number of Floors: 2 ■ Design: Goi Architectural Institute Co., Ltd. (Ishikawa Prefecture) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • 4.png
  • 5.png
  • 6.png
  • 7.png
  • 8.png
  • 9.png
  • Architectural Design Software
  • Structural calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example | Steel Structure One-Story Kindergarten

Structural Calculation Software Example | Steel Structure One-Story Kindergarten

A building with a distinctive roof shape! The plan is to have a one-sided slope at a ratio of 1:2 with a reverse slope.

This is an introduction to a case study of the integrated structural calculation software 'Super Build/SS7' for a single-story kindergarten made of steel. The project is a single-story kindergarten with a steel frame, featuring a building with a floor plan measuring 53m x 30m. It is located in the suburbs, where a relatively large site was available, allowing for a single-story layout. To apply for a single-story structure, we conducted manual calculations to verify the establishment of the rigid floor assumption for the roof section and the "stress transfer" in the frame sections. Additionally, we held preliminary meetings to discuss the feasibility of obtaining building confirmation for a single-story structure. Although the roof surface is unique, further examination allowed us to demonstrate cohesive behavior. 【Practical Overview】 ■ Use: Kindergarten ■ Structural Type: Steel Frame ■ Number of Stories: 1 ■ Design: Nanto Architectural Planning (Osaka Prefecture) *For more details, please download the PDF or feel free to contact us.

  • 1.jpg
  • 2.jpg
  • 3.jpg
  • 4.jpg
  • Architectural Design Software
  • Structural calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example | RC Structure 12-Story Above Ground, 1-Story Below Ground Office Building

Structural Calculation Software Example | RC Structure 12-Story Above Ground, 1-Story Below Ground Office Building

Can accommodate irregular shapes! By performing horizontal load capacity calculations, we design results that are close to the initial image.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' used for a 12-story above-ground and 1-story below-ground office building made of reinforced concrete (RC). The design utilizes the irregular shape of the site, maintaining a 500mm setback, which directly translates into the building's floor plan. Structurally, it features two volumes that rise and connect in between, creating a cohesive structural plan. Additionally, columns are placed in the center of spans where there are no existing piles, and these columns are connected by cantilever beams, forming a three-dimensional framework with orthogonal columns and a moment-resisting frame. [Case Study Overview] ■ Use: Office Building ■ Structural Type: RC (PRC) ■ Levels: 12 above ground, 1 below ground ■ Design: ANDO Imagineering Group/AIG (Tokyo) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • Architectural Design Software
  • Structural calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Structural Calculation Software Example │ S-Structure + RC Structure 4-Story Mixed-Use Commercial Facility

Structural Calculation Software Example │ S-Structure + RC Structure 4-Story Mixed-Use Commercial Facility

An example of planning as an integrated structure! The floor plan and elevation are complex buildings that also serve as a mixed-use facility.

We would like to introduce a case study of the integrated structural calculation software 'Super Build/SS7' for a four-story mixed-use commercial facility constructed with steel (S) and reinforced concrete (RC). This building is planned to include multiple retail units (SF2 triangular dry roof), an office building (SF4 octagonal frame dry roof), a parking structure (SF4 self-parking roof solar equipment frame dry roof), and an RC studio building (RCF2 inner child method). The project is designed with structural spans of 28 meters in the X direction, 33 meters in the Y direction, and 17 layers in height, allowing for the entire building to be modeled by incorporating dummy layers and numerous passages. 【Case Study Overview】 ■ Use: Mixed-use commercial facility ■ Structural Type: Steel (S) + Reinforced Concrete (RC) (Inner child method: both upper and lower structures are S with Exp.J) ■ Levels: 4 stories ■ Design: Terui Structural Office (Hiroshima Prefecture) *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • 4.png
  • 5.png
  • 6.png
  • 7.png
  • 8.png
  • 9.png
  • Architectural Design Software
  • Structural calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A case study collection of structural calculation software featuring feedback from over 80 customers.

A case study collection of structural calculation software featuring feedback from over 80 customers.

Free download of case studies for design offices and universities! Easy-to-use structural calculation software!

We are currently offering a free booklet titled "Customer Voices," which includes feedback from over 80 users of Union System's structural calculation software! Union System's "Super Build" and "SS21" series are structural calculation software widely used by many structural designers! [Contents] ◎ Usage and solution examples from K Design Office ◎ Usage and solution examples from I Research Institute ◎ Usage and solution examples from A University [For more details, please download the catalog or feel free to contact us]

  • Other Software
  • Structural calculation software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Structural calculation software

Related Categories of Structural calculation software

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.