Infrared Sensor Product List and Ranking from 8 Manufacturers, Suppliers and Companies

Infrared sensor, independent detection method for upper and lower sections, PB-IN-100AT

An infrared sensor with an independent detection method for upper and lower sections that demonstrates effectiveness in preventing bypassing.

Adoption of a dual response time system To prevent malfunctions caused by small animals and birds while ensuring reliable detection of intruders, it is possible to individually adjust the response speed for simultaneous four-beam light interruption and individual upper and lower beam light interruption. Simultaneous four-beam light interruption: 35ms to 500ms Individual upper and lower beam light interruption: 100, 200, 300, 500ms Prevent mutual interference and bypassing! Modulation frequency switching function When conducting linear surveillance with multiple infrared sensors or multi-stage surveillance, it is possible to easily avoid mutual interference and bypassing by switching the modulation frequency of the infrared pulse beam. (Switchable from 1CH to 4CH) Automatically set to optimal sensitivity! Auto gain lock function As long as it is within the maximum surveillance distance, the optimal sensitivity margin is automatically set according to the surveillance distance. Confirmation of gain lock is also easily performed with an electronic sound. Notify of environmental deterioration! External environment diagnosis function If the infrared light reception level drops below a certain threshold due to dense fog, heavy rain, snowfall, etc., an environmental deterioration signal will be output separately from the alarm signal.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Beam Blocking Method PH-200SE

Outdoor long-range infrared sensor ideal for perimeter security of vast areas.

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion detection. If the infrared light reception drops below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation from external light and adverse weather conditions such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Light Axis Adjustment With the built-in aiming device and the included sensitivity checker, light axis adjustment can be performed easily and reliably. Additionally, there is a monitor jack for checking sensitivity levels with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Configuration By synchronizing infrared signals, mutual interference is eliminated, allowing for the configuration of a flexible security network.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption type PH-600SE

Outdoor long-range infrared sensor ideal for perimeter security of vast areas.

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion detection. If the infrared light reception drops below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation caused by stray light and adverse weather such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Optical Axis Adjustment With the built-in aiming device and the included sensitivity checker, optical axis adjustment can be performed easily and reliably. (The PH-600SE is equipped with a rifle scope to enhance adjustment accuracy.) Additionally, it features a monitor jack that allows sensitivity levels to be checked with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Configuration By synchronizing the infrared signals, mutual interference is eliminated, allowing for the configuration of a flexible security network.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-compact infrared sensor Near-infrared type (opposite type) PB-6Sb

A super small infrared sensor with a miniaturized amplifier section and a freely detachable connection cable.

■Ideal for security at CD and ATM corners, windows, and corridors The PB-6Sa/6Sb is an ultra-compact opposing infrared sensor with a separated amplifier section, and since the exposed part is only the sensor head (diameter 15mm), security for CD and ATM machines can be conducted discreetly. It can also be used for a wide range of applications such as detecting passing objects at windows, corridors, doors, and for integration into HA devices. ■Realization of compact amplifier section The amplifier section has been miniaturized to W:45mm H:94mm D:29mm. Additionally, the volume has been reduced by 40% compared to our conventional products, allowing for flexible installation locations. ■Cuttable connection cables Depending on the installation location, the connection cables for both the transmitter and receiver can be cut to the necessary length, eliminating the need to bundle them near the amplifier section and allowing for tidy wiring. ■User-friendly design ● The sensor head can be easily installed using a one-touch mounting method by simply drilling a 12mm hole and pushing it in. ● It features a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near-Infrared Type (Direct Reflection Type) Indoor 1m Use PR-1B

Direct reflection type infrared sensor capable of motion detection.

■Direct Reflection Type Without Reflector Since it adopts a direct reflection method, a reflector is not required. ■Convenient Sensitivity Adjustment Volume It comes with a sensitivity adjustment volume that allows you to adjust the sensitivity according to the installation location. (It is set at the factory to detect a human body at 1 meter.) ■Wide Range of Applications It can accommodate a wide range of applications that require stationary detection. ■Easy Installation As it is a reflection type sensor with integrated light emission and reception parts, installation and wiring can be completed with just the main unit. ■User-Friendly Design ● It has a thin and compact size of 23.5mm in thickness. ● It has terminal connections, making wiring connections easy. ● It can be used as an embedded type by using an embedded plate (BP-5B, BP-5D: sold separately). ● Using L brackets (BL-5: sold separately) further expands its applications. ■Cautions for Using This Sensor Due to its operating principle, this sensor may not detect the following types of objects, so please be cautious: ● Objects with a surface that is glossy and close to a mirror finish. ● Objects with extremely low light reflectivity. 【Examples】 Clothing made of black wool, black glossy suits or scarves, leather products, items with laser coating.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PXB-60TE

The 2-segment beam opposing infrared sensor has evolved into a new era! An infrared sensor packed with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-efficient design (Low current consumption) Compared to conventional products (PB-TE series), current consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminates lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, and diisobutyl phthalate.) ■Structure resistant to insect intrusion (Insect-proof and drip-proof design) With insect-proof bushings that encase the wires and a waterproof structure, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption type PXB-100HFA

The highest quality infrared sensor that connects stability and trust, compatible with environments and eco-friendliness. The pole cover that came with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with a sensitivity margin of 100 times and a distance margin of 10 times, we reduce false activations during adverse weather conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce false activations caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply than before, eliminating the need for thick wiring even during long-distance installations, thereby greatly reducing wiring material costs. ■Green Design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor Near-infrared beam interruption method PXB-200HFA

The highest quality infrared sensor that connects stability and trust, compatible with environments and eco-friendliness. The pole cover included with the PXB-HF has been removed.

■Dual Modulation Method By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) ■Four-Stage High-Power Beam By employing a four-stage high-power beam with 100 times the sensitivity margin and 10 times the distance margin, we reduce malfunctions during adverse environmental conditions such as fog, snow, and heavy rain. ■Wide Pitch By expanding the vertical and horizontal dimensions of the beam compared to conventional models, and in conjunction with the four-stage beam simultaneous blocking method, we significantly reduce malfunctions caused by birds and fallen leaves. ■Energy-Efficient Design We have significantly reduced power consumption. (Less than 50% compared to our conventional models) This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even for long-distance wiring, thereby greatly reducing wiring material costs. ■Green Design We comply with the environmentally conscious RoHS directive. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) *RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption type, PXB-50F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect protection (equivalent to IP65). The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, which greatly reduces wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

(Temperature detection over a surface using an infrared array sensor) SSC Corporation

The infrared array sensor is a sensor that can capture a wide range of temperature information non-contactly.

SSC Corporation is a company that primarily provides non-contact thermometers. It receives infrared radiation with a sensor, enabling temperature measurement in a very short time. Since it is non-contact, measurement can be performed regardless of the distance between the thermometer and the measurement target, expanding its application range into various fields, including safety and environmental sectors. We strive daily to ensure that many people can use our products conveniently and with peace of mind. If you are considering measurement, analysis, or management using infrared sensors, please feel free to consult us. We are also the sole domestic agent for Germany's Heiman Sensor Company. 【Product Line】 ■ Thermopile-type infrared sensors ■ Sensor application products (temperature sensors, carbon dioxide sensors) ■ Development, design, manufacturing, and sales of electronic measuring instruments using various sensors *For more details, please refer to our catalog or feel free to contact us.

Company：エスエスシー
Price：Other

Other measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adopts two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the infrared beam light entry method detects the light entering the main unit and outputs an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security. ■Easy to install Thanks to the integrated reflection method of the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it has a built-in optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment according to the installation location is possible.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor PXB-40TE

The dual-beam opposing infrared sensor has evolved into a new era! An infrared sensor filled with patented technology creates safety and trust!

■Strong against stray light (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish between stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (Two-stage high-power beam) By adopting a high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce malfunctions during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-saving design (Low power consumption) Compared to conventional products (PB-TE series), power consumption is reduced by over 40%. It can be supported by a smaller power supply than before. ■Green design (Compliance with RoHS directive) It complies with the environmentally conscious RoHS directive. (Eliminating lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers, bisphthalates, butyl benzyl phthalate, dibutyl phthalate, diisobutyl phthalate) ■Structure resistant to insect entry (Insect-proof and drip-proof design) With insect-proof bushings and waterproof structures enveloping the wiring, we achieve dustproof, drip-proof, and insect-proof measures equivalent to IP55. The structure is designed to be less susceptible to insects and water (compared to our conventional products).

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption type, PXB-100F

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage caused by induced lightning. *This does not guarantee protection against failures or malfunctions due to lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to match the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced power consumption (to less than 50% compared to our previous models). This allows for the use of smaller power supplies than before, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor surveillance. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared sensor, near-infrared beam interruption method, PXB-200F.

With evolved performance and workability, connecting safety and trust: 4-stage high-power beam infrared sensor.

■Strong against lightning (Enhanced lightning protection) We have strengthened the surge resistance performance to reduce damage from induced lightning. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Structure that prevents entry of ants and other pests (Insect and drip-proof design) By using insect-proof bushings and dedicated gaskets that envelop the electric wires, we achieve high dust, drip, and insect prevention measures (equivalent to IP65). The insect-proof bushing can be cut to match the size of the electric wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Energy-saving design (Reduced power consumption) We have significantly reduced the power consumption (to less than 50% of our conventional models). This allows for the use of smaller power supplies compared to previous models, eliminating the need for thick wiring even for long-distance connections, thus greatly reducing wiring material costs. ■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. ■Improved pole mounting (Back-to-back mounting) The adoption of a new pole mounting bracket has improved the workability when mounting back-to-back on poles. As a result, back-to-back mounting has become easier even at high altitudes.

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor [Salt Damage Countermeasure Product] PXB-200HFC

Achieving excellent airtightness with IP65 performance! This infrared sensor is resistant to salt damage and can be used with confidence in harsh environments.

■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor surveillance. ■Strong against harsh environments (4-stage high-power beam) By employing a 4-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggers during adverse environmental conditions such as fog, snow, and heavy rain. ■Energy-efficient design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of a smaller power supply compared to conventional models, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Green design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.) ■Dustproof and splash-proof structure (IP65) Through improvements in insect-proof bushings that envelop the electrical wires and dedicated gaskets, we have achieved an IP65 rating (equivalent to IP67).

Company：セキュリティハウス
Price：Other

Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Infrared Sensor Product List and Ranking from 8 Manufacturers, Suppliers and Companies

Infrared Sensor Manufacturer, Suppliers and Company Rankings

Infrared Sensor Product ranking