Electric lock control panel - List of Manufacturers, Suppliers, Companies and Products

Electric lock control panel Product List

16~18 item / All 18 items

Displayed results

Electric Lock Control Panel DM-110K

Standard electric lock control panel This is a standard electric lock control panel compatible with most electric locks from various manufacturers. (Also compatible with magnetic locks.)

■Three Operation Modes ● You can choose from three operation modes: "Automatic Locking Mode," "Repeated Lock/Unlock Mode," and "Manual/Automatic Locking Mode." ● In "Automatic Locking Mode," the panel lock function can disable unlocking operations via the buttons on the main panel. ■ Fire Alarm Link Function In addition to continuous unlock input, it is equipped with a fire alarm input. While the signal (non-voltage a contact) from the fire alarm panel is active, unlocking is maintained. (Locks automatically in conjunction with fire alarm recovery.) ■ Supports Long-Distance Wiring Regardless of the type of electric lock, wiring is possible up to 150m (φ0.9mm-3P). (When the main unit is powered by AC100V.) ■ Standard Equipped with Unlock Prohibition Input An additional contact signal input is provided to disable the panel's unlock button and external inputs. This allows you to prohibit unlocking operations in conjunction with security signals or tamper signal inputs. (Unlocking via fire alarm input takes priority even during the prohibition of unlocking.) ■ Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), Miwa Lock's operation sub-devices: SSP-C1D, SSP-C1E, etc., can also be connected.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electric Lock Control Panel (Single Line Power Failure Compensation Type) DM-700

High-performance 2-wire electric lock control panel

■Power Outage Compensation The external power supply is DC12V500mA with ample capacity, and it has a built-in power outage compensation circuit that lasts about 30 minutes, allowing for the connection of a keypad, card switch, and even a fingerprint verification switch. ■Compact Adapter with Two-Wire System The main electrical control panel is connected to the included two-wire electric key adapter using CPEVφ0.9-1P or AEφ0.9-2C. ■Control Output with Voltage-Free Relay Contacts State outputs for door opening, unlocking, and temporary unlocking are provided via voltage-free relay contacts. It can be directly connected to security transmitters or automatic reporting devices. ■Abnormalities in Electric Lock Indicated by Alarm If the door is left open abnormally for a set time, or if there are issues such as forced entry or disconnection in the electric lock, it will be indicated by an LED and an alarm buzzer (volume adjustable), and the alarm output (voltage-free relay contacts) will also be activated. ■Various Operation Sub-Devices Can Be Connected In addition to the operation sub-devices RSP-200TKR (exposed type) and RSP-200TKU (embedded type), operation sub-devices from Miwa Lock, such as SSP-C1D and SSP-C1E, can also be connected.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-line electric lock control panel for 4 lines BAN-AS4

It is a two-wire multi-line electric lock control panel.

■Features ● Operates electric locks or electric strikes remotely. Controls electric locks equipped with a two-wire conversion adapter using two wires. ● Unlocks the electric lock (electric strike) with an operation button, and the status of locking/unlocking and door opening/closing can be confirmed with an indicator lamp. ● Can control up to 32 electric locks or electric strikes. BAN-AS4: up to 4, BAN-AS8: up to 8, BAN-AS16: up to 16, BAN-AS24: up to 24, BAN-AS32: up to 32. ● Automatically identifies the type of electric lock being used. ● Control of the electric lock can be set to either automatic locking (Mode A) or repeated operation (Mode B). ● Up to 5 operation displays can be connected for each electric lock (electric strike). ● Electric locks can be controlled via external inputs (voltage-free contacts) such as intercoms, timers, and fire alarm systems. * The two-wire conversion adapter AD211 is included. ● Equipped with JEM-A terminals for easy connection to HA systems. ● In case of an abnormality (such as disconnection or forced entry) in the electric lock, an alarm output (voltage-free C contact) can be generated.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration