Earthquake-resistant reinforcement brackets - List of Manufacturers, Suppliers, Companies and Products

Earthquake-resistant reinforcement brackets Product List

16～28 item / All 28 items

Displayed results
Seismic reinforcement hardware 'FIT Power' for concrete block walls, etc.

Seismic reinforcement hardware 'FIT Power' for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. The maximum protrusion of the angle support on the site side is kept to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, tightening work can be performed by one worker from the site side, enabling a reduction in construction time. Compatible with perennial walls. *Please inquire about delivery times as this is a made-to-order product. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Seismic reinforcement hardware "FIT Power" Type 14 for concrete block walls, etc.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as a substitute for retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement fittings for concrete block walls 'FIT Power' suitable for permanent walls

Seismic reinforcement fittings for concrete block walls 'FIT Power' suitable for permanent walls

Can be installed even in narrow areas like densely populated urban residential areas! Earthquake-resistant reinforcement brackets that can be installed in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. *The model compatible with the perennial wall is made to order. We require about one month for manufacturing and delivery. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Prevents free rotation with rounded head bolts ■ Design that maintains convenience even in narrow lots - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement member for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Earthquake-proof and vibration-damping equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE construction example: FIT GATE + HIGHWALL

FIT GATE construction example: FIT GATE + HIGHWALL

An example of construction of an original gate combining "FIT GATE" and "FIT HIGH-WALL"!

We would like to introduce a case where we delivered "FIT GATE + HIGHWALL." The "FIT HIGH-WALL," which is the same height as the "FIT GATE," does not require a retaining wall due to its seismic design, allowing for secure pathways even in areas adjacent to roads, while also serving as a privacy screen. Since the embedded post and intercom piping are installed and shipped from the factory, there is no need for detailed work on-site, reducing the burden of on-site labor. 【Case Overview】 ■ Product: FIT GATE, FIT HIGH-WALL ■ Size: Approximately W10,550 × H2,925 mm ■ Installation Time: Approximately 5 hours *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences
  • Fences and gateposts
  • shutter

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT GATE Construction Example: Tropical Style Gate

FIT GATE Construction Example: Tropical Style Gate

The roof is designed with a section cut out to allow the growing plants to emerge!

We would like to introduce a case where a gate finished in a southern country style was manufactured and delivered. The finishing paint and tile work were carried out by the contractor. The roof has been designed with a portion cut out to allow the growing plants to emerge. Please feel free to contact us when you need our services. 【Case Overview】 - The finishing paint and tile work were carried out by the contractor. - The roof has been designed with a portion cut out to allow the growing plants to emerge. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT Power Construction Case: Company

FIT Power Construction Case: Company

The impact on neighboring residents is minimal, and the seismic reinforcement work can be completed in a short period!

We would like to introduce a case where FIT Power was adopted for the seismic reinforcement of a concrete block wall for a certain company. Due to the adjacent apartment building, it was difficult to carry out extensive construction work. FIT Power can reinforce the existing block wall as it is, so although excavation work is necessary, it has less impact on neighboring residents compared to demolition and replacement work, allowing for the seismic reinforcement to be completed in a short period of time. 【Case Overview】 ■ Challenges - It was difficult to carry out extensive construction work due to the adjacent apartment building. ■ Results - Although excavation work was necessary, it had less impact on neighboring residents compared to demolition and replacement work, and the seismic reinforcement was completed in a short period of time. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT Power Construction Case: Coin Parking

FIT Power Construction Case: Coin Parking

The installation period is shorter compared to demolition work, allowing for consideration of the users as well.

Here is a case study where FIT Power was installed on the boundary wall of a coin parking lot. Due to the difficulty of dismantling and removing structures for exhaust gas measures, and the desire to maintain as much parking space as possible, it was decided to use FIT Power for seismic reinforcement instead of a retaining wall that would protrude significantly and reduce space. The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. [Case Overview] ■ Issues - Dismantling and removal are difficult due to exhaust gas measures, and there is a desire to maintain as much parking space as possible. ■ Results - The protrusion of the angle on the property side is approximately 65mm, allowing for seismic reinforcement while maintaining the parking space. *For more details, please refer to the related links or feel free to contact us.

  • Gates, walls and fences

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT Power Construction Case: New Private Residence

FIT Power Construction Case: New Private Residence

Introducing examples that achieve both securing traffic flow and preventing disasters caused by earthquakes and other events!

We would like to introduce a case study of FIT Power installation in a newly built private residence. In this instance, at the request of the homeowner, the flow from the service entrance to the single door next to the parking lot was poor. To resolve this issue, they chose FIT Power. Instead of removing all the support walls, we replaced two support walls from the single door to the service entrance with FIT Power, achieving both a secure flow and disaster prevention from earthquakes and other hazards. [Case Overview] ■ Replaced two support walls from the single door to the service entrance with FIT Power ■ Achieved both a secure flow and disaster prevention from earthquakes and other hazards *For more details, please refer to the related links or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT Power Construction Case Study: Nursery School

FIT Power Construction Case Study: Nursery School

Introducing examples of how we were able to ensure the safety of environments where small children live in a relatively short period of time!

Here is an introduction to a case study of FIT Power installation at a nursery school. FIT Power was installed for seismic reinforcement. It was possible to achieve seismic retrofitting without narrowing the parking spaces or pathways. From the parking area, only the angle columns are visible, and they do not stand out much, thus not harming the landscape. 【Effects】 ■ Achieved seismic retrofitting without narrowing parking spaces or pathways ■ Does not stand out much and does not harm the landscape ■ Ensured the safety of the environment where small children live *For more details, please refer to the related links or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT Power Construction Case: Kindergarten

FIT Power Construction Case: Kindergarten

Since large-scale construction such as demolition and removal is not required, it is possible to complete the work in a short period!

Here is an introduction to a case study of FIT power installation at a kindergarten. Although there was a retaining wall separating the kindergarten from the neighboring property, it was not installed at the appropriate pitch, so additional reinforcement was carried out using FIT power. Since the protrusion is smaller than the retaining wall, the children can play as they always have without feeling any discomfort. 【Case Overview】 ■ Additional reinforcement of the retaining wall separating the kindergarten from the neighboring property ■ Additional reinforcement of the wall near the playground equipment ■ Children can play as they always have without feeling any discomfort *For more details, please refer to the related links or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FIT Power Construction Case: Rental Apartment

FIT Power Construction Case: Rental Apartment

Introducing a case where a block wall built in an alternating pattern was able to accommodate standard sizes!

We would like to introduce a case study of FIT power installation in a rental apartment. There were block walls of varying heights built alternately, but there were no retaining walls, posing a risk of toppling during an earthquake. However, since it faced the parking lot, constructing new retaining walls would have compromised convenience, and rebuilding would have significantly exceeded the budget, leading to hesitation in taking measures. After the installation, there were no large-scale construction works, and the construction costs were kept low due to the reduced scope of work. The pathway can be used without any differences from before. 【Case Overview】 ■ Issues - There were no retaining walls for the block walls of varying heights, posing a risk of toppling during an earthquake. - New construction would compromise convenience and exceed the budget significantly. ■ Solutions - There were no large-scale construction works, and construction costs were kept low due to the reduced scope of work. - Standard sizes were used to accommodate the alternately built block walls. *For more details, please refer to the related links or feel free to contact us.

  • Reinforcement and repair materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware

Seismic reinforcement hardware

Introducing the seismic reinforcement fittings we handle! We apply surface treatments such as plating, solvent painting, and electropolishing.

Round Monolith Co., Ltd. is a company engaged in precision sheet metal processing, can manufacturing, and painting. We handle "seismic reinforcement hardware" and provide services for cutting, polishing, punching and forming, bending, welding, and polishing and inspection. We use materials such as "SPHC-P," "SUS304-HL," and "SUS304H." Please feel free to contact us when you need our services. 【Processing Methods】 ■ Shearing ■ Deburring ■ Pressing ■ Press Brake ■ Argon Welding / Semi-Automatic Welding ■ Finishing / Inspection *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seismic reinforcement hardware

Seismic reinforcement hardware

Seismic reinforcement fittings such as clips, hangers, and suspension brackets for ceiling substrate materials.

【Popular Products】 1) Special LG Hook Reinforcement Fitting - A fitting that reinforces the "Special LG Hook" suspension fitting - Simple and easy to install - Fixed with screws pressed against the underside of the "Special LG Hook" 2) Hug Lock S/W - A fitting that improves the horizontal load capacity in the direction of the horizontal members, such as wind pressure (seismic) clips - Used for reinforcing clips near braces - Available in two types: for S bars and for W bars - Compatible with both C38 and C40 horizontal supports - Comes in pairs (same shape) - The fitting is aligned with the horizontal support, sandwiching the clip, and fixed with two included screws - Can also be installed on our "Wind Pressure Clip Push-Up Type" - For seismic ceilings and wind pressure ceilings

  • Metallic base

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.