Crack repair special bolt - メーカー・企業と製品の一覧

Thread hole regeneration construction, bolt hole regeneration, oversized processing, thread hole repair.

Permanent measures for repairing screw holes and bolt holes!!

【Product PR】 The MS method (Mechanical Stitching) for screw thread repair demonstrates outstanding effectiveness in terms of precision, durability, and cost compared to traditional methods. This technology uses our company's special bolts for repairs. Since it can be performed on-site, it allows for reduced lead times and cost savings. Permanent solutions can be achieved compared to conventional products. 【Features of the MS Method】 ■ No hardening due to heat and no residual stress ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → No significant reduction in the operating rate of equipment ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

May 2017 Issue MS Newsletter Pump Flange Screw Hole

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitching Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

June 2017 Issue MS Newsletter Press Machine Upright

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitch Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which constantly carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

January 2019 Issue MS Newsletter Cast Housing

January 2019 Newsletter - Cast Iron Housing

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitch Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and also prevents secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. With conventional welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → No significant reduction in equipment operating rates ■ Advantages in safety and environmental aspects → No use of fire, so there is no impact on the operating rates of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

December 2019 Issue MS Newsletter Cement Mill Body

December 2019 Newsletter Cement Mill Body

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitch Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and avoids secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance. In typical welding repair methods, heat alters the base material around the crack, leading to residual stress and distortion, which constantly carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of work in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

May 2020 Issue MS Newsletter Blower Pool

May 2020 Issue Newsletter Blow Pool

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitch Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance. In typical welding repair methods, the base material around the crack changes due to heat, resulting in residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs with jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Bolt Hole Repair Kit for Sale

Permanent measures for repairing screw holes and bolt holes!!

The MS method (Mechanical Stitching) for thread repair demonstrates outstanding effectiveness in terms of precision, durability, and cost compared to conventional methods. It is a technique that uses our company's special bolts for repairs. Since it can be performed on-site, it allows for reduced lead times and cost savings. Compared to conventional products, it enables permanent solutions. 【Features】 ■ No hardening due to heat and no residual stress ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of work in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：10,000 yen-100,000 yen

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

FC crack repair, new production of damaged items, casting production, aluminum 3D production.

Not welding! A new method for repairing metal cracks! Prevents damage and recurrence of cracks without adding heat. Permanent solution for metal cracks in aluminum castings.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Safety and consumables

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

April 2012 Issue MS Newsletter Aluminum Exhaust Manifold

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitching Method) that addresses metal cracks using mechanical methods. Since no heat is applied at all, there is no "thermal distortion." Residual stress in other areas does not occur, preventing secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance operations. In typical welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → No significant decrease in equipment operating rates ■ Advantages in safety and environmental aspects → No use of fire, so there is no impact on the operating rates of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

September 2012 Issue MS Newsletter Aluminum Intercooler

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitching Method) that uses mechanical methods to address cracks in metal. Since no heat is applied at all, there is no "thermal distortion." Residual stress in other areas does not occur, preventing secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance operations. In typical welding repair methods, heat alters the base material around the crack, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → No significant reduction in equipment operating rates ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rates of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

July 2013 Issue MS Newsletter Ship Engine Block Structure

July 2013 Issue MS Newsletter Ship Engine Block Framework

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitch Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and also avoids secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance operations. In typical welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs with jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of work in a short period → Does not significantly reduce the operational rate of equipment ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operational rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

December 2014 Issue MS Newsletter Cast Iron Casing

December 2014 Issue MS Newsletter Cast Casing

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitch Method) that employs mechanical methods to address metal cracks. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and avoids secondary damage such as new cracks. Metal cracks are one of the challenges in equipment maintenance. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which constantly carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of work in a short period → No significant reduction in equipment operating rates ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rates of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

December 2015 Issue MS Newsletter Aluminum Exhaust Manifold

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitch Method) that addresses metal cracks using mechanical methods. Since it does not apply any heat, there is no "thermal distortion." It prevents the occurrence of residual stress in other areas and also prevents secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance operations. In typical welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

June 2016 Issue MS Newsletter Cylinder Head Exhaust Pipe

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitching Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. In conventional welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rates of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

Renovation and repair methods

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Bolt hole repair, screw hole repair, permanent measures, metal crack repair, screw hole regeneration method.

We will repair damaged female threads, bolt holes, and broken female threads to the same size as the original. Unlike conventional products, this can be used as a permanent solution.

The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitching Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat at all, there is no "thermal distortion." It prevents residual stress in other areas and also prevents secondary damage such as new cracks. 【Features】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

企業：日之出水道機器メカニカルスティッチ部
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Crack repair special bolt - メーカー・企業と製品の一覧

Crack repair special boltの製品一覧