31～45 件を表示 ／ 全 63 件
It is a mechanical component primarily intended for the opening and closing or locking of doors and lids.
We have prepared two types: push-in type and pull-in type. In both cases, the mechanism retracts the latch when the handle is rotated approximately 55 degrees (it is compatible for both left and right use). Additionally, this product allows for free reconfiguration of the handle.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
It has a lightweight and easy-to-grip design, making it suitable for storage cases for devices that require portability.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
This is a handle with a slim and smart design. Since the mounting screws and other components are not visible on the surface and there are no protrusions, it can be used with any equipment or device without any discomfort.
It can also be used in combination with the handle.
This is an assembly of fittings and rods that can be used together with our product THA-276-2H (handle).
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
This is a flat handle that allows you to check the locking and unlocking status with the "color" of the indicator. You can lift the handle with your fingertips. By adopting a multi-tum key, a wide variety of key variations can be produced (made to order). It is compatible with the installation of THA-506-2.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
This handle improves safety by eliminating sudden protrusions through a two-step lifting mechanism.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
This is a pop-up flat handle that resolves the issue of poor handle operation caused by resistance from the fasteners in conventional small flat handles, while also adding waterproofing.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
It is a thin rainproof handle from the mounting surface to the fastening hardware. ★ The handle has a mechanism that allows it to be lifted in two stages.
It is a mechanical component primarily intended for the opening and closing or locking of doors and lids.
When the push button is pressed, the lever is gently lifted. Additionally, to prevent malfunctions of the lever operation caused by foreign objects, a mechanism that lifts the lever by pressing the push button has been adopted.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
When the handle is stored, a lift mechanism that draws in the fastening hardware has been adopted. There is no rattling as it tightens the door, further enhancing the shielding effect. The depth from the mounting surface has been made shallow, allowing for effective use of space. Additionally, it is aesthetically pleasing. The fastening hardware can also incorporate a rod for a three-point locking mechanism.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
This is a flat handle that allows you to check the locking and unlocking status with the "color" of the indicator. You can lift the handle with your fingertips. By adopting a multi-tum key, a wide variety of key variations can be produced (made to order). It is compatible with the installation of THA-506-2.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
Hook the arm onto the fixed side receiving part and tighten it to lock. Due to its spring-type design, it can withstand vibrations and has a structure that provides airtightness. Installation is done by securing it to the bracket from the back, and it can be easily installed with just one screw from the front.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
The release button (push button) is located at the top of the product, which reduces contact with the hand caused by the handle popping up when releasing the fastener, thereby enhancing operability. Additionally, a shutter has been adopted for the lock, improving dust resistance.
It is a mechanical component primarily designed for the opening and closing, as well as locking, of doors and lids.
When you pull the handle, the stop fitting retracts, allowing for opening and closing operations through the rotation of the handle. When you push down the handle, it tightens the door.
It is a mechanical component primarily designed for the opening, closing, and locking of doors and lids.
It is an L-shaped handle that can be used on both the left and right sides.
