Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
1～10 item / All 10 items
Grip (Square Type) FG・FGM Series
It can be used for a wide range of applications, not only as a handle or grip but also as covers for levers and gears, and at the ends of cables. ● There are two types: round end and flat end. ● You can also choose the color. ● Made in the USA (with some production starting in Japan).
Measures against strong winds and prevention of wire damage during line suspension! A grip to secure OPGW and wires to the pole.
Fujii Electric's "Belt Grip" is a tool for securing OPGW and electrical wires to a tensioning car. It is effective in preventing damage to electrical wires caused by strong winds during line suspension and repeated movement on the tensioning car. There are two types in the lineup, allowing you to choose according to your usage situation. 【Features】 ■ Secures OPGW and electrical wires to the tensioning car ■ Measures against strong winds during line suspension ■ Prevents damage to electrical wires caused by repeated movement on the tensioning car ■ Lineup that can be selected according to usage situation *For more details, please refer to the PDF document or feel free to contact us.
Using high-durability melamine board.
This product features a revolutionary grip made from melamine plywood for the handles of putty knives and trowels. Melamine decorative plywood is a plastic sheet formed by layering multiple sheets of impregnated paper, where melamine resin and phenolic resin are each impregnated into printed paper and kraft paper, dried, and then laminated under high temperature (150°C) and high pressure (approximately 100kg/cm²). Maintenance is easy, and there is no need to worry about water exposure or paint peeling. Please feel free to consult us if you have any requests. *For more details, please do not hesitate to contact us.
Used for securing the siding line. No insulators or binding wires are needed.
Used for securing the siding line. Insulators and binding wires are not needed. *For more details, please check our company's e-commerce site.↓
Improvement of safety! By spreading aggregates, slip resistance is enhanced.
The "BK Grip-K (KC-G Method)" is a formwork-type color grip method that is suitable for barrier-free design, as it does not create any steps due to its thin layer. By using formwork with tile-like or patterned designs, resin is applied to typical asphalt or concrete pavement surfaces, and aggregates are scattered to create a comfortable urban space. Since it uses a fast-curing resin, construction can be completed in a short time, allowing for early opening. 【Features】 ■ Improved safety ■ No steps ■ Mitigation of the heat island effect ■ Short construction time and early opening ■ Enhanced durability of the pavement *For more details, please refer to the PDF materials or feel free to contact us.
Easy to install, won't shift, won't fall! Corner installation can be easily done with a cut on one wing.
The "GW Grip" is a product that can securely hold glass wool in place. It allows for inspection of the installation status of soundproofing materials (glass wool) for PS soundproof walls before board installation. Additionally, it enables standardization of the prevention of glass wool falling behind unit baths, which has previously been left to the site. Furthermore, it can be installed without making contact with existing walls or concealed walls, ensuring an air layer is maintained, even in cases of furred walls or double walls. 【Features】 ■ Securely holds glass wool ■ Easy installation for anyone ■ Compatible with thicknesses from 40mm to 120mm ■ Allows for easy corner installation with a cut (slit) on one side ■ Custom dimensions available upon request *For more details, please refer to the PDF materials or feel free to contact us.
Flex Fit Grip (Round Type) LC・New LCM Series
It is of course ideal as a grip, as well as for protecting pipes and covering cable terminals. It is also used for masking, taking advantage of its durability. ● Available in inner diameters from 6.35mm to 50.0mm, with an inner length (length to the bottom) of up to 279.40mm. ● You can also choose the color. ● Made to order in lots of 50-100 pieces.
Enables handheld inspection by equipping! Available in sets of 2.
The "LBJ Grip" is a dedicated handheld grip for the Light Board PROJ A4 series that we handle. By attaching it, handheld inspections become possible, making it easy for anyone to lift. Additionally, we offer "defect reduction lighting" used in various fields such as LCD products, automobiles, and transparent films. Please contact us if you have any inquiries. 【Specifications】 ■Product Name: LBJ Grip ■Model: LBJ-G2 *For more details, please download the PDF or feel free to contact us.
Compact design convenient for testing small specimens! Introducing the manual wedge-shaped grip.
The "2716-01x/-02x/2736-01x series" is a manually operated wedge grip designed for easy mounting, alignment, and positioning of test specimens. After mounting the test specimen, the gripping force increases as the test load increases. Due to the movable structure of the grip body, there is virtually no initial load generated during the mounting of the test specimen. 【Features】 - Quick mounting and dismounting of test specimens - Easy mounting of test specimens to enhance productivity - Self-locking wedge structure prevents slipping of the test specimen - Ensures a consistent gauge length during specimen mounting - Compact design convenient for testing small specimens - Connection to the test system without slack - Quick face replacement without tools *For more details, please refer to the PDF document or feel free to contact us.
The grip section can be selected from resin or stainless steel! Grip with a movable bracket type.
The "ETP-143(S)" is a grip with a movable bracket. It can be installed in various locations, such as on spherical surfaces. You can choose the material for the grip section from resin or stainless steel. 【Features】 ■Material - Fixed base: Nylon (PA) - Grip ETP-143: Fiber-reinforced plastic (FRP) ETP-143S: Stainless steel (SUS304) ■Finish - Fixed base: Raw (Black) - Grip ETP-143: Raw (Black) ETP-143S: Hairline 【Applications】 ■Building equipment, machinery, etc. *For more details, please refer to the PDF document or feel free to contact us.
