glue Product List and Ranking from 44 Manufacturers, Suppliers and Companies

Last Updated: Aggregation Period:Sep 24, 2025~Oct 21, 2025
This ranking is based on the number of page views on our site.

glue Manufacturer, Suppliers and Company Rankings

Last Updated: Aggregation Period:Sep 24, 2025~Oct 21, 2025
This ranking is based on the number of page views on our site.

  1. タイルメント Aichi//Building materials, supplies and fixtures manufacturers
  2. 東亞合成 新製品開発事業部 機能性接着剤部 Tokyo//Building materials, supplies and fixtures manufacturers
  3. null/null
  4. 4 日本アクア Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 信越ポリマー Tokyo//Building materials, supplies and fixtures manufacturers

glue Product ranking

Last Updated: Aggregation Period:Sep 24, 2025~Oct 21, 2025
This ranking is based on the number of page views on our site.

  1. Product Catalog: Synthetic Resin Cover "Fine Cover" タイルメント
  2. Light-curing adhesive "Alonix Series" 東亞合成 新製品開発事業部 機能性接着剤部
  3. Condensation prevention spray foam insulation "Handy Foam" *Waterproof
  4. 4 Canister-type spray polyurethane insulation material "Handy Foam"
  5. 5 Non-Freon rigid foam urethane "Aqua Foam One-Component Hand Type" 日本アクア

glue Product List

16~30 item / All 155 items

Displayed results

Adhesive "Evo Stick SLS Turbo"

Can be used both indoors and outdoors. Exhibits excellent adhesion to most building materials!

"Evostick SLS Turbo" is a high-quality adhesive based on silane-modified polymer (SMP). It adheres heavy materials such as bricks, stone, and ceramic tiles vertically without support. Additionally, it exhibits excellent adhesion to most construction materials, including non-ferrous metals, wood, polyurethane, aluminum, stone, glass, and mortar. It can be used both indoors and outdoors and is suitable for fixing roof tiles, skirting boards, siding, and plasterboard rails. 【Features】 ■ Fast curing with very quick adhesion strength development ■ Achieves high adhesion strength, vibration resistance, mobility, and impact resistance in a short time (15 minutes) ■ Service temperature range -40℃ to +100℃ ■ Usable indoors and outdoors ■ Excellent adhesion to most construction materials *For more details, please refer to the PDF document or feel free to contact us.

  • glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane-based insulation material SELECTION 500

Insulation material that combines moisture permeability and flexibility.

SEALECTION500 was developed by DEMILEC at the request of the Canadian government in the 1980s as a breathable polyurethane insulation material. Since then, through extensive research, SEALECTION500 was created as the world's first insulation that combines breathability and flexibility. Developed with the desire for people to live safely and healthily, SEALECTION500 is made by expanding a special resin 120 times with 100% water. 【Features】 The foam is incredibly close to air, making it a foam-based insulation material that is gentle on both people and the planet. ● For more functions and details, please download the catalog.

  • Hard urethane foam
  • Insulation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tile Receive 844

Are you troubled by white efflorescence or peeling of tiles? A tile adhesive that is waterproof!

Non-absorbent polymer cement-based tile adhesive The tile adhesive creates a waterproof tile substrate that prevents moisture from the surface and substrate in one process, along with a highly flexible tile bonding layer. It can be applied to various substrates, contributing to shortened construction periods. 【Features】 ○ Excellent flexibility and waterproofing ○ Quick-drying performance ○ Ensures a non-permeable substrate ○ Heat resistance -20℃ to 70℃

  • Tile work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Adhesive for ribbon-dead foam "Ribbondex"

"Ribbondex" offers a wide variety of strains in addition to the representative varieties listed below, in order to meet any request.

The chip binder "Ribbondex" has been used by customers for many years, building a solid track record. The high-quality urethane chip foam starts with the selection of urethane chip adhesives. The hardness of the product must be chosen based on the desired quality and manufacturing process, whether it is hard to soft, and the reaction time, whether it is fast to slow. The urethane chip adhesive "Ribbondex" offers a wide variety of options in addition to the representative types listed below, to meet any request.

  • glue
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Contract manufacturing of polyurethane resin prepolymers, adhesives, urethane rubber, etc.

With 47 years of knowledge and manufacturing technology in urethane, we will assist and propose solutions from the lab-scale examination of prototypes to mass production.

Our company offers contract manufacturing of polyurethane resin prepolymers. We can provide various proposals tailored to your needs by hearing your desired recipes and performance for alternatives to existing or discontinued products. Please feel free to contact us! Strengths of Token Resin Chemical: - Extensive knowledge and technology in various types of urethane - A well-established sales system that can respond immediately to urgent requests - Capable of handling scales from 100 kg to 10 tons with diverse reaction vessels - High-viscosity filling is also possible (track record: several thousand to hundreds of thousands mPa·s at 25°C) - Various packaging options available (from 1 kg cans to drums and 1000L containers) - Filtering mesh sizes can be adjusted according to your preferences - ISO 9001:2008 certification obtained - Many qualified personnel with permits for handling hazardous materials - Explosion-proof factory capable of handling Class 4 Type 1 *For more details, please feel free to proceed with the inquiry below.

  • Coating film waterproofing material/permeable waterproofing material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Basic Knowledge Series on Rubber】What is Urethane Rubber?

High wear resistance and mechanical strength! We offer "Mirable Urethane Rubber" and "Liquid Urethane Rubber."

Polyurethane rubber is a type of plastic, simply put, it is "plastic with rubber-like elasticity." The polyurethane rubber we handle comes in two types: "Mirable polyurethane" and "liquid polyurethane." "Mirable polyurethane" is a product made from solid materials that are the same as typical rubber materials. "Liquid polyurethane" is, as the name suggests, a product made from liquid raw materials. 【Features】 ■ Advantages - High wear resistance and mechanical strength - Oil resistance (ester-based) ■ Disadvantages - Heat resistance, water resistance (ester-based) *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Is the IcyNen LD foam <urethane water-absorbent>?

Developed to absorb almost no water! Introducing the results of the polyurethane foam water absorption test.

Polyurethane, like sponge and similar materials, is fundamentally a material that easily absorbs water. When it absorbs water due to rainwater intrusion and retains it, it can cause mold growth, as well as degradation or deformation and shrinkage due to hydrolysis. "Icynene LD Foam" is a spray foam polyurethane developed with a unique cell structure that minimizes water absorption, and the difference is evident. In the North American ASTM D2862 water absorption test results for spray polyurethane, the water absorption rate was only "5%", showing more than a tenfold difference compared to other companies. [Test Overview] ■ Test Name: Spray Polyurethane Water Absorption Test ■ Test Content: - Water is placed in a metal container, and the test specimen is completely submerged in water for 96 hours. Afterward, it is taken out to measure how much water it has absorbed. *For more details, please refer to the PDF document or feel free to contact us. *Service Areas: Aichi, Gifu, Mie, Shizuoka, the three Hokuriku prefectures (Toyama, Ishikawa, Fukui), Nagano.

  • Urethane foam

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Is the Icynene LD foam sweater warm?

Icynene insulation prevents air movement within the walls, eliminating concerns about moisture buildup!

For many years, an old sweater may not feel very warm because the fibers have shrunk and are no longer able to create sufficient air layers, and the same applies to fiber-based insulation materials. Icynene insulation does not allow air movement within the walls and does not absorb water or retain moisture. In the test results of ASTM E2178 in the United States, the air permeability rate of "Icynene LD Foam" was 0.019 l/(s·m²)@75pa, which is below the ASTM standard. [Test Overview] ■ Test Name: Air Permeability Test ■ Test Content - A test specimen is placed in a sealed pressure vessel, and negative pressure is applied by evacuating air from one side to measure how much air flows through the test specimen. * For more details, please refer to the PDF materials or feel free to contact us. * Service Areas: Aichi, Gifu, Mie, Shizuoka, the three Hokuriku prefectures (Toyama, Ishikawa, Fukui), Nagano.

  • Hard urethane foam

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Is the Icynene LD foam (spray polyurethane) smelly?

Green card certification and green building certification too! The chemical components of VOC are below the standard value.

Polyurethane foam has a distinctive odor known as amine smell when sprayed. However, this dissipates to a level that is hardly noticeable to humans within 24 hours after spraying. Icynene's site-applied spray foam insulation has low VOC (volatile organic compounds) levels, which are lower than those of typical paints and adhesives. Additionally, the chemical components of VOCs as defined by the Ministry of Health, Labour and Welfare are below the standard values. [Features] ■ Low VOC levels, lower than typical paints and adhesives ■ The chemical components of VOCs as defined by the Ministry of Health, Labour and Welfare are below the standard values *For more details, please refer to the PDF materials or feel free to contact us. *Service areas: Aichi, Gifu, Mie, Shizuoka, the three Hokuriku prefectures (Toyama, Ishikawa, Fukui), Nagano.

  • Hard urethane foam

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Icynene LD Foam <Creating a Quiet Environment>

The indoor side of the wall using Icynene shows data indicating it is about half!

Polyurethane foam is an insulation material with excellent sound absorption performance. "Icynene LD Foam" is a very soft polyurethane foam that absorbs sounds generally referred to as living sounds, ranging from 250 to 4000 Hz. In tests conducted by the American ASRM E90/C423, the NRC (Noise Reduction Coefficient) was 0.70, and the STC (Sound Transmission Class) was 37 dB. [Test Overview] ■ Test Name - Sound Transmission Loss (dB) - Noise Reduction Coefficient (Absorption Rate) ■ Test Results - STC (Sound Transmission Class): 37 dB - NRC (Noise Reduction Coefficient): 0.70 *For more details, please refer to the PDF document or feel free to contact us. *Service Areas: Aichi, Gifu, Mie, Shizuoka, the three Hokuriku prefectures (Toyama, Ishikawa, Fukui), Nagano.

  • Hard urethane foam

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

EV NAVI 2022 Catalog

Transformations triggered by entry from different industries and industry reorganization! The environment surrounding EVs and trends among manufacturers.

This catalog systematically expresses the structural industrial changes brought about by the electrification of the automotive industry, while also connecting new information gathered from manufacturers across various categories into a single volume. We introduce adhesives for motors and inverters, as well as tapes for module cases and electrical wiring, categorized by manufacturer. The term EV refers to "vehicles powered by electricity," encompassing all electric vehicles, including hybrid vehicles (HV), fuel cell vehicles (FCV), and plug-in hybrid vehicles (PHV). [Contents] ■ What is EV ■ The environment surrounding EV and manufacturer trends ■ Transformations triggered by entry from different industries and industry restructuring ■ Reduction in the number of parts and changes in structural components ■ Key concepts of electrification: "lightweighting" and "electrification" *For more details, please refer to the PDF document or feel free to contact us.

  • Work tools
  • Safety and consumables

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Easy-to-use onsite foam polyurethane "Insulpack"

Easy energy-saving renovations for a home that is warm in winter and cool in summer!

The "Insul(R) Pack" is a site-applied polyurethane that is easy to install anywhere, with excellent thermal insulation, airtightness, and adhesion. It allows for easy energy-saving renovations to create a warm home in winter and a cool one in summer. 【Features】 - 40 years of proven performance in foam insulation - Excellent insulation performance - No electricity required, easy installation - Suitable for underfloor, ceilings, and walls - Environmentally friendly with F☆☆☆☆ rating For more details, please contact us or download the catalog.

  • Hard urethane foam
  • Roof and gutter construction
  • Insulation work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Waterproof and dustproof box lock resin cover

A resin cover that protects the locks of delivery boxes and mailboxes from water droplets and dust! It can also be installed on locks from other manufacturers!

Hinomoto Lock is developing locks for delivery boxes, which have seen increased demand in recent years. The dial lock allows delivery personnel to place packages in the delivery box, set a desired number, note the number, and unlock it with that number, making it very convenient. However, there have been concerns about its usability when installed outdoors due to susceptibility to water droplets and dust. In response, we have developed a resin cover to protect the lock! This cover is not only resistant to water droplets and dust but also made from weather-resistant AES resin, making it less prone to deformation, discoloration, and deterioration due to sunlight, humidity, and temperature changes. It can be used in conjunction with our original "4-Number Dial Locker Lock" and is also compatible with products from other manufacturers. Image 4: A larger size is also available. Please contact us for details. *This does not guarantee complete waterproofing or dustproofing. 【Material】 ■ Resin (Body/Cover): AES (Black) ■ Shaft: SUS304 ■ Packing: Silicone ■ Packing (Sheet): Silicone *Please inquire about custom colors for the resin. *For more details, please contact us or download the catalog.

  • Door and window locks

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rainproof and dustproof delivery box lock cover made of AES resin.

A cover made of AES resin that protects the locks of delivery boxes from rain and dust! It can also be installed on locks from other manufacturers!

Hinomoto locks has developed a lock for delivery boxes that has been in demand in recent years. Delivery personnel can place packages in the delivery box, set a desired number, write the number on a memo, and unlock it with that number using a dial-type lock, which is very convenient. However, there have been voices expressing that it cannot be used mainly because it is easily affected by rain and dust when installed outdoors. To protect the lock, we have developed a cover made of AES resin! Not only does it protect against rain and dust, but due to the strong resistance of AES resin, it is less likely to deform, discolor, or deteriorate due to sunlight, humidity, and temperature changes. It can be used together with our original "4-digit dial locker lock," and it is also compatible with locks from other manufacturers. *This does not guarantee complete waterproofing or dustproofing.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-resistant adhesive sheet for fuel cells 'AHMS'

It is less likely to float or peel even in hot water! It can be bonded through heat pressing, heat laminating, etc.

"AHMS" is a waterproof adhesive sheet for fuel cells that has low leaching of ionic impurities from the adhesive, ensuring that it does not decrease power generation efficiency. It demonstrates good adhesion to various resins such as PET, PPS, and PEN, and is particularly compatible with fluorinated electrolyte membranes used in MEAs. We offer a high-adhesion type "AHMS14H1" and a low-tack type "AHMS15H1." 【Features】 ■ AHMS14H1 - Can be bonded even at low temperatures - Advantageous for bonding films with low heat resistance and for short-time pressing ■ AHMS15H1 - Less stickiness on the adhesive surface - Less likely to cause adhesive overflow during high-temperature heat pressing *For more details, please refer to the PDF document or feel free to contact us.

  • Other office supplies

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration