Transformer Product List and Ranking from 44 Manufacturers, Suppliers and Companies | IPROS

Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.

Transformer Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.

  1. ウエルネス Osaka//others
  2. ヒラヰ電計機 東京営業所 Tokyo//Facility Design Office
  3. 大阪高波 Osaka//others
  4. 4 TAMURA 本社 Tokyo//Building materials, supplies and fixtures manufacturers
  5. 5 トーザイクリエイト Tokyo//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Transformer Product ranking

Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.

  1. High Voltage Operating Transformer (Operating Transformer) EPT-■K Series ヒラヰ電計機 東京営業所
  2. Non-combustible interior finishing material with a stone texture | stonetex トーザイクリエイト
  3. Active Water Device "νG7 (New G Seven)" ウエルネス
  4. Case Study of Introduction in Restaurants │ Water Purifier 'νG7' ウエルネス
  5. 4 リゾートホテルの料理、設備での導入事例│活水器『νG7F 6連』 ウエルネス

Transformer Product List

61～90 item / All 174 items

Displayed results
Trans "BHQ"

Trans "BHQ"

Two-layer bobbin, horizontal (band)! The primary winding and secondary winding are wound on separate bobbins.

The "BHQ" is a two-layer bobbin, horizontal type transformer with a channel frame (band cover) design. It is available in maximum capacities ranging from 8.0VA to 40.0VA. To comply with international safety standards, it features a two-layer design with primary and secondary windings wound on separate bobbins. However, the terminals are only lead wires. 【Features】 ■ Two-layer bobbin, horizontal type (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals are only lead wires *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "FPL"

Trans "FPL"

A bobbin structure with a coil placed in an insulated box! Complies with PSE, UL, CSA, and EN standards.

The "FPL" is a type of transformer that is resistant to disconnection by adopting L-shaped pins. We offer the "28-12" with a maximum capacity of 1.0VA and the "35-12" with a maximum capacity of 2.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. 【Features】 ■ L-shaped pin type split bobbin, horizontal type ■ Safety standards: PSE UL CSA EN ■ Separation of primary and secondary windings to comply with international safety standards ■ Bobbin structure with the coil housed in an insulated box *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "FPH"

Trans "FPH"

A structure that is resistant to disconnection! By creating holes in the base, it is possible to implement it even lower.

The "FPH" is a low-profile transformer for printed circuit board mounting. Compared to conventional transformers, it has a lower height and features a U-shaped pin design that enhances resistance to disconnection. By creating holes in the board, it can be mounted even lower. We offer a lineup including the "35-08" with a maximum capacity of 1.0VA, the "48-06" with 2.5VA, and the "57-10" with 7.0VA. 【Features】 ■ Pin-type split bobbin, low-profile ■ Safety standard: PSE ■ Lower height compared to conventional transformers ■ U-shaped pin design enhances resistance to disconnection ■ Can be mounted even lower by creating holes in the board *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "HPU"

Trans "HPU"

Pin-type dual-layer bobbin, horizontal! It is a dual-layer type where the primary winding and secondary winding are wound on separate bobbins.

"HPU" is a transformer of the printed circuit board mounting type. It is a two-layer type with primary and secondary windings wound on separate bobbins. It complies with international safety standards. We offer models such as "28-11-BZ" with a maximum capacity of 0.8VA and "35-10-BZ" with a maximum capacity of 1.5VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Pin-type dual-layer bobbin, horizontal ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "BHK"

Trans "BHK"

Type that implements a printed circuit board in a transformer! Complies with PSE, UL, CSA, and EN standards.

The "BHK" is a channel frame (band cover) type transformer. It is a type that implements a printed circuit board onto the transformer. To comply with international safety standards, the primary and secondary windings are separated, and the coils are housed in an insulated box bobbin structure. 【Features】 ■ Pin-type box bobbin, horizontal (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board onto the transformer ■ Separation of primary and secondary windings to comply with international safety standards ■ Bobbin structure with coils housed in an insulated box *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "BVK"

Trans "BVK"

We have options available such as the "28-11-BC" with a maximum capacity of 1.0VA and the "35-12-BC" with a maximum capacity of 2.0VA!

The "BVK" is a channel frame (band cover) type transformer. To comply with international safety standards, the primary and secondary windings are separated, and the coil is housed in an insulated box bobbin structure. This type features a printed circuit board mounted on the transformer, with maximum capacities of 1.0VA for the "28-11-BC" and 2.0VA for the "35-12-BC." 【Features】 ■ Pin-type box bobbin, vertical (band) ■ Safety standards: PSE UL CSA EN ■ Type with printed circuit board mounted on the transformer ■ Primary and secondary windings are separated to comply with international safety standards ■ Bobbin structure with coil housed in an insulated box *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "BVS"

Trans "BVS"

Compliant with overseas safety standards! We offer products such as the "57-30-AC" with a maximum capacity of 18.0VA.

The "BVS" is a channel frame (band cover) type transformer that implements a printed circuit board in the transformer. We offer models starting with the "57-30-AC" with a maximum capacity of 18.0VA, as well as the "60-30-AA" with 20.0VA and the "66-30-AC" with 23.0VA. It features a dual-layer design with primary and secondary windings wound on separate bobbins, and it complies with international safety standards. 【Features】 ■ Dual-layer bobbin, vertical type (band) ■ Safety standards: PSE UL CSA EN ■ Type that implements a printed circuit board in the transformer ■ Dual-layer design with primary and secondary windings on separate bobbins ■ Complies with international safety standards *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "BHU"

Trans "BHU"

A two-layer type with primary and secondary windings wound on separate bobbins! Complies with PSE, UL, and CSA EN standards.

"BHU" is a channel frame (band cover) type transformer. It is a two-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. We offer the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BB" with a maximum capacity of 25.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. 【Features】 ■ Pin-type two-layer bobbin, horizontal (band) ■ Safety standards: PSE UL CSA EN ■ Two-layer type with primary and secondary windings wound on separate bobbins ■ Compliant with international safety standards *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "BVU"

Trans "BVU"

We have the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BA" with a capacity of 25.0VA available.

The "BVU" is a channel frame (band cover) type transformer. It is a dual-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. This model is designed for mounting on printed circuit boards. We offer the "60-30-BA" with a maximum capacity of 17.0VA and the "66-35-BA" with a maximum capacity of 25.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for both input and output. 【Features】 ■ Pin-type dual-layer bobbin, vertical (band) ■ Safety standards: PSE UL CSA EN ■ Dual-layer type with primary and secondary windings wound on separate bobbins ■ Compliant with international safety standards ■ Designed for mounting on printed circuit boards *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "HNA"

Trans "HNA"

The maximum capacity is 35.0VA to 320.0VA! There is a wide variety of products, and you can freely choose the terminals.

The "HNA" is a transformer that adopts a high-efficiency coaxial winding and features a clamp frame (angle) design. It complies with the safety standard PSE. There is a wide variety of product options available, and terminals can be freely selected. We offer models such as the "4G-25-AB" with a maximum capacity of 35.0VA, the "4G-30-AB" with 40.0VA, and the "4L-60-AF" with 320.0VA. 【Features】 ■ Standard bobbin and horizontal angle ■ Safety standard: PSE ■ High-efficiency coaxial winding adopted ■ Wide variety of product options ■ Terminals can be freely selected *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "VNA"

Trans "VNA"

The product offers a wide variety of options, and you can freely choose the terminals! It complies with the safety standard PSE.

The "VNA" is a transformer that adopts a high-efficiency coaxial winding and a clamp frame (angle) type. It is available in a maximum capacity range of 35.0VA to 320.0VA. There is a wide variety of product options, and terminals can also be freely selected. Additionally, it complies with the safety standard PSE. 【Features】 ■ Standard bobbin, vertical angle ■ Safety standard: PSE ■ Adopts high-efficiency coaxial winding ■ Wide variety of product options ■ Terminals can be freely selected *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "VNE"

Trans "VNE"

Introducing transformers, starting with the "4G-30-AB" with a maximum capacity of 40.0VA!

The "VNE" is a transformer of the clamp frame (angle) type. Only lead wires can be used for the terminals. The primary and secondary windings are separated and comply with international safety standards. We offer models including the "4G-30-AB" with a maximum capacity of 40.0VA, the "4G-35-AB" with 45.0VA, and the "4G-40-AB" with 50.0VA. 【Features】 ■ Split bobbin, vertical angle ■ Safety standards: PSE UL CSA ■ Primary and secondary windings are separated ■ Complies with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "HNI"

Trans "HNI"

Complies with overseas safety standards! A bobbin structure that separates the primary and secondary windings and is equipped with an insulating cover.

The "HNI" is a transformer of the clamp frame (angle) type. We offer the "4G-40-AB" with a maximum capacity of 40.0VA. The conditions for maximum capacity are 50/60Hz, with one circuit for both input and output. The primary and secondary windings are separated, featuring a bobbin structure with an insulating cover, compliant with international safety standards. However, only lead wires can be used for the terminals. 【Features】 ■ Box-type bobbin, horizontal angle ■ Safety standards: PSE UL CSA EN ■ Primary and secondary windings are separated, with an insulating cover in a bobbin structure ■ Compliant with international safety standards ■ Only lead wires can be used for the terminals *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "HNQ"

Trans "HNQ"

We would like to introduce a two-layer type transformer with primary and secondary windings wound on separate bobbins!

The "HNQ" is a transformer of the clamp frame (angle) type. It is a two-layer type with primary and secondary windings wound on separate bobbins, compliant with international safety standards. Note that only lead wires can be used as terminals. We also offer models such as "4G-40-AB" with a maximum capacity of 40.0VA, "4H-40-AB" with a maximum capacity of 70.0VA, and "4H-50-AB" with a maximum capacity of 80.0VA. 【Features】 ■ Compliant with international safety standards ■ Two-layer type with primary and secondary windings on separate bobbins ■ Terminals that can be used are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "VNQ"

Trans "VNQ"

Complies with overseas safety standards! It is a two-layer type with the primary winding and secondary winding wound on separate bobbins.

The "VNQ" is a transformer of the clamp frame (angle) type. It is available in the lineup with a maximum capacity of 40.0VA ("4G-40-CB"), 70.0VA ("4H-40-CB"), and 80.0VA ("4H-50-CB"). This is a two-layer type that complies with international safety standards, with the primary and secondary windings wound on separate bobbins, and the only usable terminals are lead wires. 【Features】 ■ Complies with international safety standards ■ Two-layer type with primary and secondary windings on separate bobbins ■ Usable terminals are lead wires only ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "VNR"

Trans "VNR"

Introducing transformers with a maximum capacity of 80.0VA to 150.0VA! Featuring dual-layer bobbins and vertical angles.

The "VNR" is a transformer of the clamp frame (angle) type. It includes models such as "4H-50-AB" with a maximum capacity of 80.0VA and "4I-50-AB" with a maximum capacity of 120.0VA. The maximum capacity conditions are 50/60Hz, with one circuit for input and output each. Additionally, an insulating cover is placed over the primary winding to ensure separation from the secondary winding, and it complies with international safety standards. However, the only terminals that can be used are lead wires. 【Features】 ■ Clamp frame (angle) type ■ Insulating cover placed over the primary winding to ensure separation from the secondary winding ■ Complies with international safety standards ■ Only lead wires can be used as terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "HNZ"

Trans "HNZ"

Clamper frame type! A wide variety is available, compatible with any terminal.

The "HNZ" is a layer-type transformer with interlayer paper inserted between each layer. It features a clamp frame (angle) type and offers a wide variety of options, making it compatible with any terminal. Additionally, we have a rich selection including the "4H-29-ZB" with a maximum capacity of 60.0VA, the "4H-35-ZB" with a maximum capacity of 70.0VA, and the "4K-50-ZB" with a maximum capacity of 210.0VA. 【Features】 ■ Layer-type transformer with interlayer paper inserted between each layer ■ Clamp frame (angle) type ■ Wide variety of options ■ Compatible with any terminal ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "HBZ"

Trans "HBZ"

Using rare paper coils! You can choose the most suitable one from a wide variety.

The "HBZ" is a transformer of the clamp frame (angle) type. It features models such as the "4H-29-ZB" with a maximum capacity of 60.0VA, the "4I-40-ZB" with a maximum capacity of 100.0VA, and the "4K-50-ZB" with a maximum capacity of 210.0VA. It uses rare paper coils with interlayer paper inserted between each layer, allowing you to choose the most suitable option from a wide variety. Additionally, it comes with a terminal block for easy wiring with crimp terminals. 【Features】 ■ Clamp frame (angle) type ■ Uses rare paper coils with interlayer paper inserted between each layer ■ Options available from a rich variety ■ Terminal block included for easy wiring with crimp terminals ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "WBQ"

Trans "WBQ"

Ideal for situations where there are height restrictions in the installation method! We introduce a transformer that also meets international safety standards.

The "WBQ" is a transformer suitable for situations where there are height restrictions due to installation methods. We offer models such as "01-00-AA" with a maximum capacity of 80.0VA, "01-50-AA" with a maximum capacity of 120.0VA, and "02-00-AA" with a maximum capacity of 160.0VA. Additionally, we use a bobbin structure where the primary and secondary coils are separated, ensuring compliance with international safety standards. 【Features】 ■ Ideal for situations with height restrictions due to installation methods ■ Uses a bobbin structure with separated primary and secondary coils ■ Complies with international safety standards ■ Safety standards: PSE UL CSA EN *For more details, please refer to the PDF documentation or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "FHX"

Trans "FHX"

Ideal for switching power supplies! We offer a wide variety of special sizes.

"FHX" is a transformer that uses a ferrite core. It is suitable for switching power supplies. With a wide variety of options, we can meet a broad range of needs. Additionally, we offer a diverse selection of special sizes, so please feel free to consult us. 【Features】 ■ Uses a ferrite core ■ Suitable for switching power supplies ■ Abundant variations ■ A wide range of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Trans "FVX"

Trans "FVX"

Adopting ferrite cores! We respond to a wide range of needs with a rich variety.

"FVX" is a transformer suitable for switching power supplies, featuring a ferrite core. We offer models such as "ER-28-BZ," "ER-28L-BZ," and "ER-35-BZ" in our lineup. With a wide variety of options, we can meet a broad range of needs. Additionally, we have a diverse selection of special sizes available, so please feel free to consult us. 【Features】 ■ Uses a ferrite core ■ Suitable for switching power supplies ■ Wide variety of options ■ A diverse selection of special sizes available *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Noise Filter Transformer "NT-500C / NT-1000C"

Noise Filter Transformer "NT-500C / NT-1000C"

Block noise that mixes into the power line.

A noise filter transformer is a transformer that blocks noise propagating through commercial power lines. It effectively works against noise entering in both normal and common modes, has a wide stop frequency range, is bidirectional, and does not require impedance matching. There are two types available: 500VA and 1000VA.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Noise filter transformer for embedded devices "NFT-L Series"

Noise filter transformer for embedded devices "NFT-L Series"

Immediate support for EMC measures! Prevents noise from being emitted, entering, and eliminates malfunctions.

The "NFT-L Series" is a noise filter transformer for device embedding with high versatility, capable of wiring to various structures of electronic devices due to its lead wire structure. It is divided into 9 types ranging from 2VA to 150VA, accommodating a variety of specifications as needed, with input voltages from 80V to 240V and output voltages from 5V to 240V. Additionally, the shield is consolidated to the transformer core, eliminating the need for special wiring (for types under 60VA). 【Features】 ■ Lead wire type ■ Can be wired to various structures of electronic devices ■ High versatility ■ No special wiring required as the shield is consolidated to the transformer core ■ Complies with various national standards such as Electrical Appliance and Material Safety Law, UL, CSA, VDE, etc. *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Noise filter transformer for equipment embedding "NFT-P series"

Noise filter transformer for equipment embedding "NFT-P series"

The pin terminal structure allows for direct mounting on the printed circuit board, significantly reducing wiring labor.

The "NFT-P Series" is a noise filter transformer for equipment integration, categorized into five types with power ratings from 2VA to 40VA, and capable of accommodating various specifications with input voltages from 80V to 240V and output voltages from 5V to 240V as needed. It complies with various international standards such as Electrical Appliance and Material Safety Law, UL, CSA, VDE, and CISPR. We can also accommodate requests for lead wire configurations. Please utilize it for EMC measures. 【Features】 ■ Pin terminal type ■ Immediate support for EMC measures ■ Prevents noise emission and reception ■ Eliminates malfunctions ■ Significantly reduces wiring labor *For more details, please refer to the PDF materials or feel free to contact us.

  • others
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Active Water Device "νG7 (New G Seven)"

Active Water Device "νG7 (New G Seven)"

A water revitalizer that transforms water into highly functional water (quantum water) by passing it through a stainless steel field converter, charging the electrons.

The "νG7 (New G7)" is a quantum water device that requires no maintenance. When water (H2O, dihydrogen oxide) passes through this product, the hydrogen bonds of the water affected by magnetic and weak electromagnetic fields within the hexagon field converter loosen, partially ionizing it and activating it as high-energy potential water that contains oxygen and hydrogen in gas form. The activated water has increased dissolving power and permeability, making it noticeable in phenomena such as water boiling more easily, plants thriving, and oil stains being easier to remove. 【Features】 ■ Obtained Japanese Patent No. 4063768 ■ Sterilization and deodorization effects ■ Increases lactic acid bacteria ■ Improved surfactant power ■ Generates trace amounts of hydrogen ■ Cost-effective with no expenses required after installation *For more details, please download the PDF or contact us.

  • Water supply facilities
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improving water environments in residential and commercial settings! Case studies and comprehensive catalogs are currently available.

Improving water environments in residential and commercial settings! Case studies and comprehensive catalogs are currently available.

The amount of sludge in the grease trap has drastically decreased, and there are many achievements such as the elimination of ammonia odors in nursing facilities. We achieve a hygienic environment through water quality improvement!

This catalog introduces the 'νG Series' handled by Wellness Co., Ltd. Starting with the "Hexagon AUTO," which allows for easy production of quantum water at home, we also feature products such as "Rebirth" and the "νG7 Series (water activator)." We showcase a wide range of products that can activate all household water for drinking, cooking, and bathing, along with accompanying photos. [Featured Products (excerpt)] ■ Rebirth ■ Hexagon AUTO ■ νG Shower Head ■ νG7 Terahertz 1100 ■ Terahertz 171 Converter We have numerous achievements in restaurants, nursing facilities, agriculture, and livestock industries. We also present case studies, so for more details, please refer to the PDF materials or feel free to contact us.

  • Water Treatment
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Maintenance-free active water device that contributes to odor prevention *with examples from care facilities

Maintenance-free active water device that contributes to odor prevention *with examples from care facilities

[Free Sample Available] Introducing case studies from nursing care facilities! A maintenance-free water purifier that reduces slime and unpleasant odors in water areas.

We would like to introduce a case where the maintenance-free water revitalizer 'νG7' was implemented at the Fukujuen nursing home located in Koyu District, Miyazaki Prefecture. Since its introduction, there has not been a single instance of the facility's unique odor, which had been a concern at the nursing home. Urine scale in the toilets has disappeared, and there is no longer any slime or water stains around the water areas. Additionally, dirt and mold in the baths have clearly decreased. Our product does not require filter replacements and does not need frequent cleaning, making it cost-effective as well. 【Case Overview】 ■ Installation Location: Fukujuen Nursing Home (Koyu District, Miyazaki Prefecture) ■ Equipment Installed: Maintenance-free water revitalizer "νG-7 (20A)" ■ Benefits of Installation - The facility's unique odor has disappeared - A sense of cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us. *If you would like a sample, please indicate "Request for Free Sample" in your inquiry.

  • Water Treatment
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Swimming school, case study on water quality improvement of pool facilities │ Water purifier 'νG7'

Swimming school, case study on water quality improvement of pool facilities │ Water purifier 'νG7'

Reduced chlorine costs by one-third! The amount of chlorine used has decreased, and I no longer worry about the smell of chlorine, rough hair, or wrinkled skin.

We would like to introduce a case study of the 'νG7' that we handle, implemented at Asuka Swimming School (Nara Prefecture). From the day after installing the νG7, the 25m pool became so clear that it looked pristine, and the costs associated with chlorine were reduced by one-third. The odor from the restrooms disappeared, and customers felt the effectiveness in virus prevention. Some customers who took bottles home also reported improvements in their troubling symptoms! I had been concerned about the smell of chlorine and the roughness of my hair and the wrinkles on my skin due to irritation, but after introducing this product, I noticed a change in water quality in about two weeks. 【Case Summary】 ■ Installation Location: Asuka Swimming School ■ Product Introduced: νG7 ■ Effects of Introduction - The water quality of the pool improved from the second day after installation. - The chlorine smell disappeared, and the irritation from chlorine was eliminated. - There was no odor in the pipes, especially the ammonia smell in the restrooms was gone. *For more details, please download the PDF or feel free to contact us.

  • 1.png
  • 2.png
  • 3.png
  • Water Treatment
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nano crystal common mode choke coil

Nano crystal common mode choke coil

Using nanocrystalline soft magnetic materials is extremely effective for low-frequency noise countermeasures!

Product Outline and Features This is a common mode choke coil using nanocrystalline soft magnetic materials. Compared to ferrite core CMC, it has high noise attenuation characteristics in the kHz range. It ensures stable impedance characteristics over a wide temperature range. Customization is available; please consult us for various modifications. Common mode chokes using nanocrystal cores. Excellent low frequency properties. Stable performance over a wide temperature range. SEIWA offers special ordered CMC.

  • Wiring devices
  • Transformer

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Transformer

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.