Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 11, 2026～Apr 07, 2026
This ranking is based on the number of page views on our site.
61～90 item / All 137 items
The astonishing water extraction rate (22L/min.) has the power of a pressure pump.
● The astonishing water extraction rate (22L/min.) has the power of a pressure pump. * Not suitable for long continuous operation. Strainer can be installed. Compatible hose diameter is 12mm.
The astonishing water extraction rate (19L/min.) has the power of a pressure pump.
● The astonishing water lift capacity (19L/min.) has the power of a pressure pump. ● Built-in non-return valve prevents backflow of water. ● Comes with a nut joint for easy hose piping with separately sold nuts. ● Compatible with 10Φ hoses. * Not suitable for long continuous operation. Strainer can be installed.
A powerful type that is hard to imagine from its slender body.
● A powerful type that is hard to imagine from its slim body. It has a faucet with a switch, and it provides a sufficient water lift capacity for showers (15L/min). *Please note that it does not come with a nut joint, so nuts cannot be used. *It is not suitable for long continuous operation. A 10mm diameter hose cannot be used. A strainer can be installed.
The faucet with a switch, of course, has a sufficient water flow rate for the shower as well (12L/min).
- The faucet with a switch, of course, has a sufficient water flow rate for the shower (12L/min). - It comes with a nut joint, making plumbing easy with separately sold nuts. * Not suitable for long continuous operation. Strainer can be installed. * Instruction manual PDF.
It is a convenient submersible pump that can be used as a "booster pump" or "circulation pump."
This is a convenient submersible pump with hose joints at both ends, allowing it to be integrated into the hose inline as a "booster pump" or "circulation pump" when the filter is removed. It can be used not only as a regular freshwater pump for galleys but also as a bilge pump for seawater, and it can also be used for transporting diesel fuel.
Maximum discharge capacity 46㎥/min - Reduce total costs with a high-capacity submersible pump!
"Just-In High Capacity Submersible Pump System" Capacity equivalent to approximately 11 units of 8-inch pumps. One DCA100 (80kVA) class generator can operate one pump. 【Features】 ■ Shortened construction time on site reduces total costs ■ Large-diameter strainer that does not clog ■ Surprising power with low energy consumption ■ Significantly improves drainage work efficiency ■ Reduces CO2 emissions and costs ■ NETIS registration number: HK-230007-A *For more details, please download the PDF or feel free to contact us.
![[Scale Watcher Introduction Case Study] Water Treatment Equipment for Leisure Facilities](https://image.www.ipros.com/public/product/image/841/2000433595/IPROS7699636805762239133.jpg?w=280&h=280)
35% reduction in pool chlorine input! Introducing case studies on the effects of implementing a light industrial water treatment system.
We would like to introduce the case study of the introduction effect of the frequency modulation electromagnetic field water treatment device "Scale Watcher" handled by B-Tep Co., Ltd. In leisure facilities, the excessive use of chlorine disinfectants resulted in a strong chlorine odor, skin irritation, clogging of filter cartridges, and problems due to decreased capacity from the hardening of filter media. After installing this product, the solubility of chlorine improved, making it easier to maintain the concentration standards. The usage of chlorine disinfectants was reduced by 35%, and the odor was also mitigated, creating a more comfortable environment. Additionally, the processing capacity of the filters significantly improved, and backwashing of the filter media became easier. Furthermore, it contributes to the improvement of environments in golf course sprinklers and bathrooms/toilets. [Case Study] ■ Installed in a leisure facility (pool) ■ Issues - Strong chlorine odor and concerns about skin irritation due to excessive use of chlorine disinfectants - Decreased capacity due to clogging of filters and hardening of filter media - Increased costs due to more frequent replacements ■ Introduction Effects - 35% reduction in the use of chlorine disinfectants - Significant improvement in filter processing capacity - Easier backwashing of filter media *For more details, please refer to the PDF document or feel free to contact us.
Grundfos pump. A groundwater supply pump made of corrosion-resistant stainless steel.
The SP submersible pump product range is renowned for its high efficiency and reliability. All SP pumps are made from corrosion-resistant stainless steel and can be used for various applications. The SP pumps are manufactured with cutting-edge fluid design to provide optimal efficiency during peak demand. They also promise long-term cost savings and reliable operation for all applications. Features of the SP product range include high efficiency, motor burn-out protection (through a combination of sensors and protective devices), and easy maintenance. A complete monitoring and control system allows for continuous optimization of the pump system.
Grundfos pump. It is a compact design pump with excellent efficiency, capable of handling lift heights of up to 200 meters.
The SQE3-inch submersible pump allows you to choose a model that meets your individual requirements across a wide range of performance. It is a compactly designed 3-inch multi-stage centrifugal pump that can be installed in boreholes smaller than the pump dimensions. The SQE pump has built-in electronic components, making installation and operation very easy, and we promise reliable and stable water supply. The pump, equipped with a permanent magnet motor, features a flexible and compact design that ensures excellent efficiency and can handle lift heights of up to 200 meters. By using the "SQEP," which combines the SQE pump with a surface control unit, constant pressure water supply is possible.
High efficiency across a wide range! Three types of impellers developed for each output, expanding the area of high efficiency.
The "Non-Clog Type CNX Series" internal cooling submersible pump for equipment water has achieved a foreign object passage diameter of 3 inches (76.2mm) or more for all models. Compared to conventional models with the same number of poles, it allows for the passage of larger foreign objects. To provide high pump efficiency across a wide range, three types of impellers have been developed for each output. By selecting the optimal impeller, operation near the highest efficiency point is possible. For more details, please download the catalog.
Foreign object passage diameter 50mm! This is a new non-clog type submersible pump for equipment.
The "CNM50" is a new type of non-clog submersible pump designed for equipment, with a foreign object passage diameter of 50mm. With a significant performance improvement, the total head has increased by 60% compared to the vortex type manufactured by ShinMaywa Industries, which has the same foreign object passage diameter. It is ideal for applications such as raw water transfer in relay pump stations and manhole pump stations, drainage in building facilities, raw water in wastewater treatment plants, and drainage in factory wastewater treatment facilities. 【Features】 ○ Compatible with manhole pump chamber cleaning devices (jet valves) ○ Pumps equipped with jet valves reduce the accumulation of sediments, the adhesion of oils and fats, and the generation of scum. For more details, please contact us or download the catalog.
Continuous operation in the air is possible! Easy replacement with land sludge pumps, making it ideal for reducing the cost of sludge pumps!
The vertical shaft external type (amphibious) pump CNT・CWT (air-cooled) series features a submersible motor that does not have a water jacket. It allows for continuous operation in the air without worrying about clogging in the cooling water channels. It is also easy to replace with land-based sludge pumps. This contributes to reducing initial running costs. 【Features】 ○ Can handle flooding due to water damage ○ Contributes to cost reduction ○ Increases design flexibility of facilities For more details, please contact us or download the catalog.
The new development motor reduces winding temperature, achieving over three times the ultra-lifespan.
The "BTR15-55" is a pump that has achieved significant weight reduction through the use of lightweight materials. To mitigate the issues of motor burnout due to overload, which is a weakness of conventional single-channel structure pumps, a new type of motor has been developed that keeps winding temperature rise low, achieving a lifespan of over three times longer (compared to conventional models). The pump components (casing, rear liner, discharge cover) utilize carefully selected special synthetic rubber, which is particularly effective against water mixed with sediment and muddy water. 【Features】 ■ Significant weight reduction achieved through the use of lightweight materials ■ Resolves the weaknesses of conventional single-channel structure pumps ■ Ensures over three times the abrasion resistance (compared to our conventional models) ■ Adopts overflow blades that do not require gap adjustment ■ Easy disassembly for straightforward maintenance *For more details, please refer to the PDF document or feel free to contact us.
![[νG61・SV-MAGII・E-7 Introduction Case] Kyorin Gakuen Educational Institution](https://image.www.ipros.com/public/product/image/93b/2000703208/IPROS24839703471046055662.png?w=280&h=280)
This is an introduction to a case that significantly fell below the standard value, with no impact from mixed water at all!
Kyorin Gakuen, a school corporation, planned to install "νG61" in the rooftop water tank of the outpatient building to reduce the BOD and normal hexane extract substances in the south and north sewage tanks of the outpatient building. BOD and n-hexane were measured two weeks, three months, and six months after installation. The n-hexane values often exceeded the standard values. There was no significant improvement in the data from the south sewage tank, and since groundwater was being used, "E-7" was installed around the south sewage tank, and "SV-MAGII" was installed in the piping of the groundwater pumping system. All types of sewage, kitchen processing water, and mixed water were significantly below the standard values, and there was no impact from the mixed water at all. [Case Overview] ■ Installation Site: Kyorin Gakuen (Kyorin University School of Medicine Hospital) ■ Products Installed: νG61, SV-MAGII, E-7 *For more details, please refer to the PDF document or feel free to contact us.
![[Magnetite Pipe Method Case Study] JR Takasaki Station (Takasaki City, Gunma Prefecture)](https://image.www.ipros.com/public/product/image/ddc/2000524657/IPROS79714725256243179445.png?w=280&h=280)
Check and analyze the condition of the test pieces (untreated tap water, untreated well water, BW mixed water)!
Here is an example from JR Takasaki Station (Takasaki City, Gunma Prefecture). Due to the mixing of well water with the main water supply, scale issues occurred in the station's shops. After installing The Bio Water in the shops for one year and observing the results, it was confirmed that scale adhesion was suppressed. In light of this result, we conducted the following tests to determine whether installing The Bio Water throughout the entire station building would be effective in suppressing scale and preventing the deterioration of the water supply facilities due to rust. From the measurement data of the roughness gauge, it was found that the mixed BW treated water showed smaller surface irregularities and that corrosion was progressing slowly across the entire surface. [Test Overview] ■ Test Method - The condition of test pieces (untreated main water, untreated well water, BW mixed water) was checked and analyzed at four intervals: at installation, 3 months later, 6 months later, and 23 months later. ■ Equipment Used - The Bio Water Omega-100 - Punch Box (16 pieces) *For more details, please refer to the PDF document or feel free to contact us. *The section titled 'Reason for Interest' displayed during PDF download is generated by AI from Ipros Co., Ltd.
Energy-saving, labor-saving, and long-lasting underwater pump with capacitive sensor and microcontroller control.
The sensor reliably detects water using capacitive technology. It can be flexibly bent, making it effective in narrow spaces. Microcontroller control eliminates the distinction between the operation and stop sensors. After installation, when power is turned on, if the water level is between the start and stop positions, it will lower the water level to the stop position. A trial operation check can be performed after installation. If connected to power, it will operate once a week even when there is no water, reducing the risk of malfunction due to sticking of sliding parts and rust in contact areas. We also offer a sister product, the float type UOY series. There are sensor-type "DOX" for wastewater submersible pumps and float-type "DOY" series as well.
![[NETIS Registration] Capacitive Automatic Drainage Submersible Pump UEX Series](https://image.www.ipros.com/public/product/image/3fc/1370889001/IPROS2876302824162724302.jpg?w=280&h=280)
NETIS registration. Next-generation automatic drainage submersible pump equipped with a microcontroller, capacitive sensors, and flexible sensor wires.
UEX Series NETIS Registered Product Submersible Pump ■ Automatic operation start with capacitive sensor Adopts a capacitive sensor that detects the conductivity of water, achieving stable water level detection. ■ Flexible sensor cable Allows for easy setting of the operation start water level without the use of tools. ■ Anti-seizing function If the operating state is not reached, the built-in microcontroller determines a 24-hour stop state and operates for 1.5 seconds to prevent seizing of sliding parts. ■ Automatic stop according to conditions The built-in microcontroller continuously calculates the operating conditions, achieving energy-saving operation by reducing the frequency of dry running starts. ■ Vortex impeller The gap between the impeller and casing is wide, preventing a sudden drop in lift due to impeller wear. NETIS (New Technology Information System) Registration Number: No.KK-130042-A
Achieved an astonishing lift of up to 200 meters with a single unit.
We will not be outdone by other companies in raising water to greater heights. The highest grade can transport water up to 200 meters. Based on our experience in tunnel construction, we have adopted a cylindrical shape to minimize the maximum diameter as much as possible. The number of parts is small, resulting in a simple structure that is easy to maintain.
It can eliminate blockages, entanglements, malfunctions, and noise during the discharge of wastewater and sewage from facilities such as sewage treatment plants and night soil treatment plants.
Since it is a submersible motor type, it does not require installation space in processing facilities and does not cause pollution such as noise or odor. The pump installed in the equipment tank must be pulled up for regular inspections, but by using a detachable device as an option, maintenance and inspections can be performed safely and easily.
Stainless steel submersible pump. Maintains stable performance over the long term.
This is a stainless steel submersible pump designed for the purpose of pumping corrosive liquids, featuring many advantages due to its simple design. The pump is made from carefully selected corrosion-resistant materials (stainless steel). Additionally, it is designed to minimize the number of components as much as possible.
Submersible axial flow pump
This is a large-capacity submersible pump designed in an axial flow type for low lift and high water volume. It is designed to be compact and lightweight compared to similar products. There is no need for a pump house, and it is hardly restricted in terms of installation. Installation simply requires placing the entire pump underwater, maintenance and inspection are easy, and there is minimal vibration and noise due to submersion.
Submersible pump with a two-stage impeller that enables high lift.
The two-stage impeller achieves a higher head than pumps with the same output. Its structure, free of cylindrical protrusions, makes it ideal for use in narrow spaces such as deep well construction.
During pump operation, the motor is constantly cooled by the overall water channel structure.
Adopting a full water channel structure with high motor cooling efficiency. It is a cylindrical pump that can be installed even in narrow pits. ● UC Series Achieves weight reduction as much as possible, starting with aluminum components. ● UCF Series The main components are made of FC for a robust design. In the case of flange specifications for convenience during hanging, the center of the discharge port is designed to align with the center of the pump.
![Easy Crawler Cleaning Machine 'Kan-Kuro' [Automatic Cleaning]](https://image.www.ipros.com/public/product/image/f43/2000200305/IPROS9004340644073640839.jpg?w=280&h=280)
With a pump and water, you can easily wash the 'crawler (heavy machinery lower part)' anywhere. *Applicable for the "Productivity Improvement Equipment Investment Promotion Tax System"!*
This is an automatic crawler cleaning device that uses a submersible pump. When started in automatic mode, it cleans the entire crawler while swinging the nozzle and spraying water. ■Features - Improved work efficiency due to automatic operation. - Economic benefits from the use of circulating water. - Enhanced cleaning effectiveness with a special nozzle. - Automatically stops after a timer operation during automatic mode. - Cleaning time and swing speed can be freely set. It is also possible to stop in either horizontal or vertical direction only. - The main body is compact and space-saving, and it is movable with casters. - Comes with a manual nozzle for finishing touches, allowing for detailed manual cleaning. - Registered as a utility model. Registration No. 319258. ■Applications - Cleaning mud and dirt from crawlers of heavy machinery, among others. *For information on the "Productivity Improvement Equipment Investment Promotion Tax System," please visit the Ministry of Economy, Trade and Industry's website. We have a demo unit available. If you are interested, please contact us. You can view the demo operation in the video below.
This is an underwater pump that adds durability, ease of handling, and cost-effectiveness.
A pump designed for high efficiency, resulting in low power consumption and energy-saving features. ■ Extremely compact and lightweight design. ■ Impeller blades designed with a wider width. ■ A simple structure submersible pump with a reduced number of parts. ■ The motor frame material is made of FC200.
Sakuragawa Engine Pump Series
Equipped with a high-performance, high-power engine, excellent durability. It demonstrates its power in high lift and long-distance drainage, as well as in agricultural and civil engineering sediment water drainage. SKF Series (High Lift Pump) For high lift, distant locations, and agricultural use. ■ Features - Adopts a closed impeller. Stability in performance and exceptional durability. - Utilizes a highly durable mechanical seal. - Equipped with a resilient high-performance engine. Compact, lightweight, and an ultra-powerful high-pressure pump. - Improved self-priming system significantly reduces suction time. STR Series (Trash Pump) Powerfully lifts and drains sediment water and solids. ■ Features - Effective in water treatment containing solids such as sludge, sand, and gravel. Compact, lightweight, and outstanding high performance. - Adopts a non-clogging two-blade impeller that is less likely to jam with solids. - Quick self-priming capability. Efficiently drains water. - Easy to replace parts. Quick inspection and cleaning can be done without tools (pump section).
Water activation system "fountain" for water quality improvement and purification measures in closed water bodies.
Fountain device It releases water into the air in the form of raindrops or mist, efficiently incorporating oxygen into the water, activating the pond's water through aeration and agitation effects, and improving water quality. It is a float-type device that can be installed simply by connecting it to a power source and placing it in the pond, eliminating the need for foundation work and making it economical. There are various types of fountain nozzles including spring water, morning glory, water bell, ejector, three-stage nozzle, and ice formations.
Simple structure, so it's quiet! Easy cleaning without stops.
The "Brush Pit" is a pit-type tire cleaning machine that allows for quick installation and operation, as well as efficient transportation. With its quietness and ease of use, it contributes to environmental conservation on site. Additionally, this product features a simple structure consisting of a cleaning pit, water supply tank, and pump. It does not have complex mechanisms such as drive systems or hydraulic systems that can cause noise or malfunctions. 【Features】 ■ Quiet and easy ■ Non-stop speed cleaning ■ Safe ■ Low cost ■ Energy-saving *For more details, please refer to the PDF document or feel free to contact us.
For cleaning mud off vehicle tires! It's a stationary type, so no civil engineering work is required.
The "Simple Crawler" is an automatic cleaning (sensor-equipped) crawler cleaning machine that responds to the passage of vehicles. Since it uses a submersible pump, it allows for the use of circulating water. By using sensors, it can perform automatic cleaning (with operating time set at will) only when approached from one side. 【Features】 ■ Cleaning device using a submersible pump, allowing for the use of circulating water ■ Adoption of special nozzles enhances cleaning effectiveness ■ Improved workability through automatic operation ■ Cleaning time and swing speed can be freely set ■ Equipped with casters for mobility ■ Nozzle included for finishing *For more details, please refer to the PDF document or feel free to contact us.
Compact, lightweight, and portable! Introducing a remote watering device that can operate up to 5 units with a single transmitter.
We offer a remote watering device that can prevent dust at demolition sites. We propose improvements to the work environment, which is often a combination of heavy labor and danger. By placing the watering operator remotely, we can avoid collision accidents with heavy machinery and also protect workers from dust-related hazards. 【Features】 ■ Compact and lightweight for portability ■ One transmitter can control up to five devices ■ Avoid collision accidents with heavy machinery by placing the watering operator remotely ■ Efficient watering can be performed by understanding the progress of work ■ Protection for workers from dust-related hazards *For more details, please refer to the PDF document or feel free to contact us.
