Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
31～44 item / All 44 items
Real-time simultaneous control of multiple units via wireless communication.
Renewing the wireless module and updating the conventional data transmission and reception device. It enables wireless communication between DSP wireless sensors, DSP wireless electromyography sensors, sports coaching cameras, and PCs, achieving real-time waveform reception and simultaneous control of multiple devices.
Real-time simultaneous control of multiple devices via wireless communication.
Renew the wireless module and update the conventional data transmission and reception device. It enables wireless communication between DSP wireless sensors, DSP wireless electromyography sensors, sports coaching cameras, and PCs, achieving real-time waveform reception and simultaneous control of multiple devices.
A vibration isolation device developed with a focus on reducing vibration amplitude in the range of 0 to 20 Hz!
The "Cell Transport Container and Vibration Isolation Device" is a product that utilizes geometric nonlinearity. During development, running tests were conducted, including FFT analysis at a speed of 60 km/h and repeated measurements of the vibration amplitude of the vehicle, leading to successful development. To prevent the occurrence of linear terms due to the influence of gravity, a constant load spring was adopted, and the outer container can be designed using cardboard, plastic board, or aluminum. 【Features】 ■ Adoption of constant load spring ■ Utilization of geometric nonlinearity ■ Development focused on reducing vibration amplitude in the range of 0 to 20 Hz ■ Prevention of linear terms due to the influence of gravity ■ Outer container can be designed using cardboard, plastic board, or aluminum *For more details, please refer to the catalog or feel free to contact us.
Seismic isolation devices effective against micro-vibrations, wind, and minor earthquakes!
The "oil damper-equipped elastic sliding bearing" is a seismic isolation device that enables the suppression of micro-vibrations without the disadvantage of increased costs. The small oil damper installed in the seismic isolation device exhibits damping force during minor deformations caused by micro-vibrations, while during major earthquakes, it is configured to provide seismic isolation effects through the sliding bearing. 【Features】 ■ Compact device ■ Ensures seismic performance against major earthquakes ■ Cost-effective device ■ Also effective in improving livability *For more details, please download the PDF or contact us.
It is a seismic isolation system that fits performance into a thickness of 3.6mm and can be simply laid down!
The "μ-solator" is a seismic isolation device with a simple structure that can be laid down to isolate only the necessary parts, clearing various constraints including product cost, construction cost, related construction costs, and even construction time. Utilizing a groundbreaking mechanism that takes advantage of multi-point sliding phenomena, it is designed with a friction coefficient suitable for seismic isolation at 10%. 【Features】 ■ Thickness of 3.6mm, no construction required, can be removed and reused ■ Does not move excessively under normal conditions, with an appropriate friction coefficient (10%) ■ Safe against unexpected shaking, with a fail-safe design *For more details, please download the PDF or feel free to contact us.
Output cutoff judgment at detection below -25dB for 10 seconds! Editable in WAVE file conversion format.
The "CAS-300" is a device that activates and plays pre-recorded announcement broadcasts stored on a memory card through input of announcement selection signals from external devices. Manual operation from the front panel is also possible, allowing for confirmation of the device's operational status and monitoring of broadcast content through test playback. It is possible to select optional features such as arbitrary recording using a microphone and a standby power suppression function. 【Features】 ■ Announcement broadcasts are pre-recorded on a memory card ■ Activated and played back by input of announcement selection signals from external devices ■ Manual operation from the front panel is possible ■ Monitoring of broadcast content can be confirmed through test playback ■ Arbitrary recording using a microphone is also possible (microphone is optional) *For more details, please refer to the PDF materials or feel free to contact us.
Compensation for power outages of up to 48 hours! It withstands a wide temperature range of -20 to 60°C.
The "SPH2502" is a wireless communication system for transmitting disaster prevention information to residents. The speaker output is standard at 120W and is equipped with a maximum of 240W (120W × 2 systems) audio amplifiers. Appropriate outdoor enclosure sizes are provided according to the specifications of the speaker output. To enhance efficiency, a digital power amplifier using original process technology has been adopted, achieving a compact and lightweight design. 【Features】 ■ Fixed-rate contracts with power companies are possible ■ Operating temperature range: -20 to 60℃ ■ Optional features - By implementing a heater, stable operation is possible even in cold regions or during winter - By equipping a microphone, local broadcasting can be performed - By implementing an equalizer function, clearer audio broadcasting is achieved *For more details, please refer to the PDF document or feel free to contact us.
Custom control for outdoor lights and spotlights, such as ON/OFF, can be flexibly accommodated!
The SJA1677 is a controller for pan-tilt cameras and network cameras. In addition to standard operations such as panning, zooming, and focusing, it also allows control of presets and camera selection, including split-screen options. It features a joystick for enhanced operability. The display section shows various information such as the currently selected camera, presets, and error messages, and custom controls like contact outputs can be flexibly managed using function buttons. 【Features】 ■ Controls pan-tilt cameras and network cameras ■ In addition to standard operations, it can control presets and camera selection (including split-screen) ■ Focuses on operability with a joystick ■ Displays various information on the display section ■ Serial control supports RS-485, RS-232C, and LAN *For more details, please refer to the PDF document or feel free to contact us.
You can understand the situation without going to the site, such as the dam itself and the meters of various equipment!
This system uses CCTV cameras (IP cameras) to monitor facilities such as the upstream and downstream of the dam and the weir gate. By installing cameras at important locations around the dam, it is possible to understand the intake and discharge conditions without having to go to the site. Since it uses an internet connection, camera footage can be checked and the cameras can be operated from a distance. 【Features】 ■ Uses CCTV cameras (IP cameras) ■ Recording device installed for 24-hour recording ■ Past footage can also be reviewed ■ Standard storage period is approximately 2 weeks ■ Multi-screen display and display on large screens, as well as integration with other equipment, are also possible *For more details, please refer to the PDF document or feel free to contact us.
It can accommodate various construction methods and significantly reduce construction costs compared to conventional seismic isolation devices!
The "Air Seismic Isolation House" is a new system that utilizes the power of air to protect homes, furniture, and most importantly, the safety of families from the shaking caused by earthquakes. When an earthquake occurs, air stored in a tank is instantly sent between the artificial ground and the foundation, lifting the entire building. Since the building is separated from the surface that is actually shaking, the shaking is reduced, preventing not only the collapse of the house but also damage from falling furniture, thereby protecting the family. [Features] - Reduces shaking from a seismic intensity of 7 to 1/30 - Significantly reduces construction costs - Annual safety inspections *For more details, please refer to the PDF document or feel free to contact us.
The separate-type seismic isolation device has evolved to respond to earthquakes of the scale of the Great East Japan Earthquake.
"AK1" is a seismic isolation device that protects IT equipment from earthquake vibrations. It has significantly evolved from conventional models, enhancing each function and implementing measures to minimize the impact on mounted items even during earthquakes that exceed the allowable displacement. Utilizing a trigger rail with a proven track record in floor isolation and industrial equipment isolation, it suppresses initial movement and improves return-to-origin performance. 【Features】 ■ Enhanced fail-safe function ■ Allowable displacement of 230mm ■ Adoption of trigger rail ■ Allowable load capacity of 15000N *For more details, please download the PDF or feel free to contact us.
![[Earthquake Measures] Consideration of Introducing Seismic Adjusters [Step 3]](https://image.www.ipros.com/public/product/image/d2b/2000716265/IPROS95505672573514325391.png?w=280&h=280)
★Must-see★ Earthquake measures that do not require drilling holes in the floor! This is content that can be referenced when introducing the 'Anshin Adjuster'.
This time, as it is the third in the series, I would like to provide guidelines regarding the "weight" of the objects for earthquake countermeasures. 1. First, regarding our products, they cannot be used for ultra-heavy equipment weighing over 8 tons. Therefore, please confirm the weight of the equipment first. *1 2. Next, if it seems that equipment weighing less than 8 tons can be used without issues, questions will arise about which products and how many should be used. Basically, the calculation is done as follows: [Weight of the object ÷ Load capacity of the gel = Minimum number of fixtures required]. For example, if you use a 60φ gel (load capacity 600kg) on equipment weighing 3 tons, it would be calculated as: 3000kg ÷ 600kg = 5 A minimum of 5 sets is required. *2 In this way, you can check the quantity guidelines for the products used. Please note that this is just a guideline, and we would appreciate it if you could contact us for more details. *1 In some cases, even equipment under 8 tons may require consideration, so please consult us. *2 Depending on the installation balance on the object, it may also be set to an even number of 6 sets.
Certification obtained for domestic radio wave law! The wireless module has been updated, renewing the conventional data transmission and reception device!
We have updated the wireless module and renewed the conventional data transmission and reception device. It enables wireless communication between DSP wireless sensors, DSP wireless electromyography sensors, sports coaching cameras, etc., and a PC, achieving real-time waveform reception and simultaneous control of multiple devices. 【Features】 ■ USB connection (powered by bus power) ■ Certified under domestic radio law
Wireless communication between wireless sensors, wireless electromyography sensors, etc., and a PC enables real-time waveform reception and simultaneous control of multiple devices!
We will refresh the wireless module and renew the conventional data transmission and reception device. It will enable wireless communication between DSP wireless sensors, DSP wireless electromyography sensors, sports coaching cameras, etc., and a PC, achieving real-time waveform reception and simultaneous control of multiple devices. 【Features】 ■ USB connection (powered by bus power) ■ Certified under domestic radio law
