Pressure Pump - List of Manufacturers, Suppliers, Companies and Products

Pressure Pump Product List

16~23 item / All 23 items

Displayed results

Air Pressure Pump APD-20SUS/APD-20SUSN

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Benefits》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not allowed.

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Pressure Pump APDS-1s/APDS-1.5s

[Sanitary Product / Heller Joint Specification] For the large-volume transfer of high-viscosity liquids! It is a separable air pressure pump that can be disassembled for cleaning.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record for food use (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

  • pump

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Camping Car/RV Supplies] Parmax 3HD 12V

A standard pressure pump that operates with a pressure switch! Equipped with a quick port.

We would like to introduce the "Permax 3 HD 12V 11.3L/min" that we handle. With the adoption of an internal bypass, it achieves a smooth water flow without pulsation, eliminating the need for an accumulator. All bolts and screws are made of stainless steel with high rust resistance. It has become a standard pressure pump that operates with a pressure switch. 【Features】 ■ A strong and reliable body that does not get damaged even with short periods of dry running ■ Easy piping with a quick port for one-touch connection (includes a 12mm hose and snap-in port) *For more details, please refer to the PDF document or feel free to contact us.

  • Air compressors, blowers and pumps

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hot Shot 4 - [Wash Down Pump] 15L/min

It is a reliable high-pressure type pressure pump for washing decks and anchors.

● This is a reliable high-pressure type pressure pump for washing decks and anchors. ● Comes with a dedicated strainer (pump guard) and spray gun. ● All bolts and screws are made of stainless steel with high rust resistance, making it suitable for use with seawater. ● Built-in temperature protection sensor. ● Can be installed horizontally or vertically (with the motor on top). * Not suitable for long continuous operation. If the motor heats up, wear will increase significantly, so please use it with a guideline of 10 minutes ON followed by 10 minutes OFF for cooling down.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parmax 1 - [Ultra Compact Type] 3.8L/min

Despite being the smallest compact model in the series, it is a pressure pump equipped with a pressure switch and has sufficient discharge capacity.

● This is a pressure pump with sufficient discharge capacity, despite being the smallest compact model in the series, and it comes with a pressure switch. ● All bolts and screws are made of stainless steel for high rust resistance. ● While it has the same specifications as the "Flojet LFP pump," this model can accommodate a 12mm inner diameter hose simply by covering the hose outlet with the included rubber fitting. ● It can be installed both horizontally and vertically (with the head down/motor up). * It is not suitable for long continuous operation. If the motor heats up, wear will increase significantly, so if you run it for 10 minutes, please allow it to cool down for about 10 minutes before using it again.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parmax 3 HD 12V 11.3L/min

A standard pressure pump that operates with a pressure switch.

A classic pressure pump operated by a pressure switch ● Adopts an internal bypass to achieve a smooth water flow without pulsation, eliminating the need for an accumulator. ● All bolts and screws are made of stainless steel for high rust resistance. ● A robust and reliable body that withstands short periods of dry running without damage. ● Features a quick port for easy one-touch piping (includes a 12mm hose and snap-in port). * Not suitable for long continuous operation. If the motor heats up, wear will increase significantly, so if you run it for 10 minutes ON, please allow for a 10-minute OFF cooldown period.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Frojet - Triplex Series 11L/min

This is a pressure pump that achieves quiet and powerful water discharge thanks to the newly developed "Triplex Diaphragm."

● This pressure pump features a triangular head shape and utilizes a newly developed "Triplex Diaphragm" to achieve quiet and powerful water discharge. ● With the adoption of an internal bypass, it provides a smooth water flow without pulsation, eliminating the need for an accumulator. ● All bolts and screws are made of stainless steel for high rust resistance. ● The robust and reliable body is resilient to damage even during short periods of dry running. ● The quick port design allows for easy one-touch piping (includes fittings for 12mm hoses and QEST). * It is not suitable for long continuous operation. When the motor heats up, wear increases significantly, so if you run it for 10 minutes ON, please use it with a 10-minute OFF cooldown period.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parmax 6 - Heavy Duty Pump 23L/min

The largest pressure pump in the series that achieves a flow rate of 23L/min at this size.

● The largest pressure pump in the series that achieves a flow rate of 23L/min at this size. ● All bolts and screws are made of stainless steel with high corrosion resistance, making it suitable for seawater use. ● Built-in temperature protection sensor. ● Can be installed horizontally or vertically (with the motor on top). ● Robust body structure that withstands short periods of dry running without damage. ● The included fitting (3/4) allows for easy snap-in installation. Compatible hose diameter: 19mm. * Not suitable for long continuous operation. If the motor heats up, wear will increase significantly, so if used for 10 minutes ON, please allow for 10 minutes OFF for cooling down.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration