Passive Sensors - List of Manufacturers, Suppliers, Companies and Products

Passive Sensors Product List

31～45 item / All 60 items

Displayed results
Passive Sensor 3D Surveillance Type PA-6812WA

Passive Sensor 3D Surveillance Type PA-6812WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. * Transparent sprays or items with low near-infrared reflectivity may not be detected. Wide Base Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm by the blinking and illumination of the memory indicator light (yellow) during the alert. ● The memory indicator light will blink for 3 minutes after the alarm is triggered, then continue to illuminate for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810WA

Passive Sensor Round Surveillance Type PA-6810WA

Wide-base passive sensor with built-in anti-blind function.

■Anti-Blind Function This function detects interference applied to the front of the sensor. If an obstruction is attached to the front, it will issue a warning through the output of a trouble alarm and the illumination of a trouble indicator light. Once the obstruction or prank is removed, the output will stop, but if a trouble alarm has been triggered, please immediately check the operation of the sensor. ● As a warm-up, the trouble alarm will not be output for about 2 seconds after power is turned on. ● Transparent sprays or items with low reflectivity in the near-infrared range may not be detected. ■Wide Base Design ● By widening the base (Φ150mm) compared to conventional designs, the issue of noticeable dirt marks on the ceiling surface during sensor replacement has been resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm through the flashing and illumination of the memory indicator light (yellow) during the alert. ● The memory indicator light will flash for 3 minutes after the alarm is triggered, then continue to stay lit for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type PA-6812W

Passive Sensor 3D Surveillance Type PA-6812W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the flashing and lighting of the memory indicator light (yellow). ● The memory indicator light flashes for 3 minutes after the alarm is triggered, then continues to light continuously for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light that is convenient for operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type PA-6820W

Passive Sensor Surface Surveillance Type PA-6820W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ●By widening the base part (Φ150mm), the issue of visible dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the blinking and lighting of the memory indicator light (yellow). ●The memory indicator light blinks for 3 minutes after the alarm, then continues to light for 47 minutes before automatically turning off. ●The function can be disabled using the mode selector. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for safe and smooth operation at height with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ●Includes an alarm indicator light that is convenient for operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up) ●Attachment: Wall mounting is also possible with BL-5000, BCW-401 (sold separately).

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805W

Passive Sensor Spot Surveillance Type PA-6805W

A passive sensor with a wider base than before, taking into account the dirt marks at the installation location.

■New Design ● By widening the base part (Φ150mm), the issue of noticeable dirt marks on the ceiling surface during sensor replacement is resolved. ■Auto Reset Memory Function When multiple sensors are connected, it is possible to confirm which sensor triggered the alarm during the alert state by the flashing and lighting of the memory indicator light (yellow). ● The memory indicator light flashes for 3 minutes after the alarm, then continues to stay lit for 47 minutes before automatically turning off. ● This function can be disabled using the mode selector. ■Switchable Count Function Depending on the installation location, the mode selector allows for optional settings of 1, 2, 3, or 4 counts. ■Improved Installation and Maintenance The snap-in method is adopted for attaching and detaching the sensor unit and base unit, allowing for safe and smooth operation even at high locations with a one-touch action. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier. ■User-Friendly Features ● Equipped with an alarm indicator light for convenient operation confirmation. (During alarm: red LED lights up, during memory: yellow LED lights up)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6812B(BL)

Passive Sensor PA-6812B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) specifications are now available for all models.

Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renewals as well. Black Color Available for All Alert Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not detract from aesthetics). The visibility and sensitivity of the LED are equivalent to those of the white version. Unique Alert Area Configuration Our unique optical technology creates a sharp alert area, providing effective detection performance with a movable mirror regardless of area settings. Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for easy one-touch operation and smooth work.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Round Surveillance Type PA-6810B

Passive Sensor Round Surveillance Type PA-6810B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC7 to 30V. Wiring material selection and long-distance wiring can be done without worrying much about voltage drop due to wiring resistance. Suitable for renewals as well. ■Black Color Available for All Caution-type Models We have introduced a black version that considers harmony with ceilings in temples, shrines, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to those of the white version. ■Unique Caution Area Configuration Thanks to our unique optical technology that creates a sharp caution area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance The snap-in method for attaching and detaching the sensor unit and base unit allows for one-touch operation, making the work smooth and easy.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type PA-6805B

Passive Sensor Spot Surveillance Type PA-6805B

Basic sensors with energy-saving and compact design!! The black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows for the use of smaller power supplies than before, enabling cost reduction. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7 to 30V. Allows for wire selection and long-distance wiring without much concern for voltage drop due to wiring resistance. Suitable for renovations as well. ■Black Color Available for All Alert Models We have introduced black versions that consider harmony with ceilings in temples, shrines, museums/art galleries, and stores. This allows the sensors to blend into the background and remain inconspicuous (without compromising aesthetics). Furthermore, the visibility and sensitivity of the LEDs are equivalent to those of white models. ■Unique Alert Area Configuration Our unique optical technology creates a sharp alert area, providing effective detection performance regardless of area settings with a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor PA-6806B(BL)

Passive Sensor PA-6806B(BL)

Basic sensors with energy-saving and compact design!! Black (BL) version is now available for all models.

■Energy-saving Design 1 (Low Current Consumption) Reduces current consumption to about one-third (8mA) compared to our conventional products. Allows the use of smaller power supplies, leading to cost reductions. ■Energy-saving Design 2 (Low Voltage) Operating voltage is DC 7–30V. Enables selection of wiring materials and long-distance wiring without much concern for voltage drop due to wiring resistance. Also suitable for renovations. ■Black Color Available for All Warning Type Models We have introduced a black version that considers harmony with ceilings in temples, museums, art galleries, and stores. This allows the sensor to blend into the background and remain inconspicuous (does not compromise aesthetics). Furthermore, the visibility and sensitivity of the LED are equivalent to the white models. ■Unique Warning Area Configuration Thanks to our unique optical technology that creates a sharp warning area, effective detection performance is achieved regardless of area settings using a movable mirror. ■Improved Installation and Maintenance We have adopted a snap-in method for attaching and detaching the sensor unit and base unit, allowing for one-touch operation and smooth work.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Surface Surveillance Type - 20m Use PA-6720

Passive Sensor Surface Surveillance Type - 20m Use PA-6720

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during the alert state by the flashing or lighting of the memory indicator (yellow). ● The memory indicator will flash for 3 minutes after the alarm is triggered, then continue to light continuously for 47 minutes before automatically turning off. ● The function can be disabled using the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. Security can be performed at the optimal sensitivity according to the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the unlikely event that there is damage or disconnection in the internal circuit or connection part of the sensor, the system will notify you of the abnormality with continuous alarm output and continuous lighting of the alarm indicator. ■Reliable Design Resistant to Radio Wave Interference Effective measures have been taken in the circuit and mechanical design against electrical noise coming from the line and noise transmitted through the air. ■Alarm Output Switching Function The alarm output can be switched between contact a or contact b using the mode selector, making system configuration easier.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type for 5m - PA-6705

Passive Sensor Spot Surveillance Type for 5m - PA-6705

Standard passive sensor equipped with an auto-reset memory function.

■Auto Reset Memory Function When multiple sensors are connected, you can confirm which sensor triggered the alarm during standby by the flashing and lighting of the memory indicator (yellow). ● The memory indicator will flash for 3 minutes after the alarm is triggered, then continue to light continuously for 47 minutes before automatically turning off. ● This function can be disabled via the mode selector. ■Easy Sensitivity Adjustment Function Sensitivity settings can be adjusted in four levels by switching the mode selector. Security can be performed at the optimal sensitivity according to the installation location. ● Adjustment range: 60%・80%・100%・120% ■Device Abnormality Alarm Function In the event of damage or disconnection in the sensor's internal circuit or connection parts, the system will notify you of the abnormality with continuous alarm output and the continuous lighting of the alarm indicator. ■Reliable Design Resistant to Radio Interference Effective measures have been taken in circuit and mechanical design against electrical noise entering from the line and noise transmitted through the air. ■Alarm Output Switching Function The alarm output can be switched to contact a or contact b using the mode selector, making system configuration easier.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive Sensor 3D Surveillance Type for 12m PA-8012

Passive sensor that intelligently controls various functions.

■Optimal for use under harsh installation conditions Even when phenomena that are likely to cause malfunctions occur, such as small animals (mice, dogs, cats), stray light, drafts, and external noise, the dual twin effect ensures minimal impact. ■SC (Automatic Sensitivity Adjustment) Circuit Equipped with an ASC circuit that automatically sets the appropriate sensitivity based on the balance between room temperature and the intruder's body temperature. ■Reliable design resistant to radio interference By adopting a unique N.E. (Noise Eliminator) in circuit and mechanical design, effective measures against electrical noise entering from the line and noise propagating through the air are implemented. ■Alarm Memory Function By adding control contacts externally to the sensor, the activated sensor can be confirmed by the illumination of a display lamp. ■Alarm Indicator Lamp Control By adding control contacts externally to the sensor, the ON/OFF of the indicator lamp can be operated remotely. *It can also be controlled by a switch inside the sensor. ■Trustworthy and user-friendly design ● Low power consumption of 15mA when using DC12V. ● Equipped with a targeting area adjustment function that allows visual confirmation of the area.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

High-altitude installation passive sensor, three-dimensional surveillance type, PA-8410

Due to its unique high-density surveillance area, installation in high places such as atriums and lobbies is possible.

■Unique surveillance area that can be installed at high locations This sensor can monitor from high places, which was difficult with conventional sensors. Its unique high-density surveillance area allows for installation at heights of 4m to 8m. The high-density surveillance area, composed of four reflective mirrors, can be used in locations with high ceilings such as atriums and event spaces, as well as under eaves in truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables monitoring even in places where near-infrared beam sensors cannot be installed. ■Robust housing case It features a housing case made of AES resin, which improves impact resistance and weather resistance. This reduces the risk of damage in places like gymnasiums where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, the excellent weather-resistant packing structure prevents water intrusion. (When performing exposed wiring, please use the included waterproof bushing or conduit for wiring.)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-altitude installation passive sensor, surface surveillance type, PA-8420

High-altitude installation passive sensor, surface surveillance type, PA-8420

Due to its unique high-density alert area, it can be installed in high places such as atriums and lobbies.

■Unique security area that can be installed at high locations This sensor can provide security from high places, which was difficult with conventional sensors. Its unique high-density security area allows for installation at heights of 4m to 8m. The high-density security area, composed of four reflective mirrors, can be used in spaces with high ceilings such as atriums and event spaces, as well as under the eaves of truck yards. ■Can be installed indoors and semi-outdoors With a rainproof structure, it can be installed not only indoors but also in semi-outdoor areas. It enables security in places where near-infrared beam sensors cannot be installed. ■Robust housing case It uses an AES resin housing case, improving impact resistance and weather resistance. The risk of damage is relatively low even in places like gymnasiums where ball games are played. ■Rainproof structure In locations where wind and rain can be severe, such as under building eaves, the excellent weather-resistant packing structure prevents water intrusion. (If exposed wiring is used, please use the included waterproof bushing or conduit for wiring.)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive Sensor Spot Surveillance Type: Exposed Type PA-750

Passive sensors ideal for spot surveillance at entrances, exits, and passageways.

■ Two types: Ceiling-mounted and Ceiling-recessed These sensors are installed on the ceiling surfaces of entrances, corridors, and other areas to detect intruders. We offer two models: ceiling-mounted and ceiling-recessed, featuring an elegant design reminiscent of downlights, ensuring that architectural beauty is not compromised. ■ Intrusion Area Adjustment Function The width of the monitored area can be adjusted with a single touch according to the location being secured. Wide: At a height of 3.5m, the width is 2.8m Narrow: At a height of 3.5m, the width is 1.4m. Additionally, the area angle can be adjusted from 3° to 30° in 10 steps (vertical angle from -10° to +20°). ■ Sensitivity Adjustment Volume The device is factory-set to the appropriate sensitivity, but it includes a built-in "sensitivity adjustment volume" for fine-tuning based on installation conditions.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.