![[Case Study] High-pressure injection of 90°C high-temperature liquid into an extrusion molding machine.](https://image.www.ipros.com/public/product/image/e7b/2000583553/IPROS06520914489006872789.png?w=280&h=280)
[Case Study] High-pressure injection of 90°C high-temperature liquid into an extrusion molding machine.
We have resolved the request to use a pump for injecting additives into a resin extrusion molding machine! Here is a case study from a resin product manufacturer.
The resin product manufacturer requested to use a pump to inject additives into the resin extrusion molding machine. However, there were challenges such as "a pressure of over 5MPa is required at the injection point" and "the viscosity increases when the liquid temperature drops, so it needs to be maintained at 70-90°C." For solutions to the challenges and requests, please download and view the PDF materials. 【Customer's Challenges and Requests】 ■ A pressure of over 5MPa is required at the injection point ■ Pulsation in the pump causes uneven injection, so a continuous and consistent amount needs to be injected ■ The viscosity increases when the liquid temperature drops, so it needs to be maintained at 70-90°C ■ Due to high temperature and high pressure, safety measures are necessary ■ It should be movable rather than fixed to one location *For more details, please refer to the PDF materials or feel free to contact us.
- 企業：タクミナ
- 価格：Other
![[Case Study] Circulation of 75% sulfuric acid at high temperature for an extended period at a constant flow rate.](https://image.www.ipros.com/public/product/image/5da/2000583557/IPROS24925351720856924894.png?w=280&h=280)
