Measuring Instrument(no) - メーカー・企業と製品の一覧

Anemo Master Light "Model 6006-D0" [Rental]

You can measure the wind speed at air supply outlets such as air conditioning ducts. By using an extension rod, you can also measure the air volume at high places, such as within the duct.

■ All operations, such as switching between wind speed and wind sound, holding measurement values, and turning the power ON/OFF, can be performed with a single button. ■ Simple operation and wide measurement range. ■ Extremely high durability, allowing for reliable measurements. ■ Accommodates diverse measurement needs. ■ The wind speed element uses the same highly stable platinum wire as the higher models. ■ Built-in temperature compensation circuit provides excellent responsiveness to temperature changes.

企業：ソーキ
価格：Other

Anemometer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Ultraviolet Intensity Meter / Illuminance Meter 'XRP-3000' [Rental]

The XRP-3000 is a high-precision ultraviolet intensity meter and illuminance meter that can simultaneously measure ultraviolet intensity and illuminance.

It is also excellent in operability, allowing anyone to use it easily. This is a highly accurate device that is ideal for use in non-destructive testing (NDT), such as measuring ultraviolet light intensity and illuminance in dark rooms. It also comes with traceability to NIST (National Institute of Standards and Technology), which is essential in the aviation industry. ■ Measurement range: Ultraviolet intensity 0–100mW/cm² (0-100,000μW/cm²) ■ Illuminance: 0-5,300Lux (0-500fc) ■ Measurement wavelength range: Ultraviolet intensity: 320–400nm ■ Illuminance: 460–675nm

企業：ソーキ
価格：Other

Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Portable Turbidity Meter '2100P Model' [Rental]

The turbidity can be measured using the sampled water.

■ Easy to operate for anyone. ■ Directly read values in turbidity units (NTU), eliminating the need for calculations or calibration charts. ■ Average multiple measurements taken within a certain time frame and display the average signal to reduce noise. ■ Built-in self-diagnosis function (diagnostic mode can be executed by pressing just one key). ■ Choose one from three manual range modes (0-9.99/0-99.9/0-1000 NTU) for measurement. * However, for samples with significant turbidity changes, select the auto range mode. ■ Automatic zero adjustment.

企業：ソーキ
価格：Other

Water quality/pH measuring device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Vehicle Back Sensor "Mihari-gumi" (Manufactured by ND Lease System)

It is an alarm assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers.

- This is a warning assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers. - It is a NETIS registered product. [Registration No. KT-090057-VE] - A monitoring sensor is installed at the rear of the heavy machinery, and a warning buzzer is placed near the operator. (Magnet type) - The detection distance of the monitoring sensor can be switched; it is set to 10m when the heavy machinery is moving fast and 5m when it is moving slowly. - The monitoring sensor should be installed horizontally, at a height of 1.2 to 1.7 meters above the ground. - The monitoring sensor and warning buzzer are designed with a magnet for easy attachment and detachment. - Workers will attach a helmet sensor to the back of their helmets. (Rubber belt type) - The sensor attached to the back of the helmet does not detect within an approximate 120° range in front. - The monitoring sensor and helmet sensor are rechargeable. - Please specify the quantity of helmet sensors when placing an order.

企業：西尾レントオール通信測機事業部
価格：Other

Measurement and analysis equipment leasing and rental

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Digital Thermo-Hygrometer 'CR-1200'

Digital thermometer and hygrometer equipped with a temperature sensor from a Japanese manufacturer!

The "CR-1200" is a digital thermometer and hygrometer equipped with a large 97×68mm LCD screen. It displays icons for caution, severe caution, and danger, contributing to heatstroke prevention. Additionally, when the temperature is below 20°C, it shows an influenza warning icon and provides alerts through a buzzer sound and red LED flashing, depending on the severity. 【Features】 ■ Thermometer/hygrometer is always displayed ■ Low battery is indicated by an icon ■ Buzzer sound and LED light flashing can be turned ON/OFF ■ Uses one AA battery *For more details, please download the PDF or feel free to contact us.

企業：クレセル千葉事業所
価格：Other

Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

【小型・軽量】二酸化炭素濃度計『CO2KeeperNeo』

CO2を計測し、基準値を超えたら自動でサーキュレーターをON！喚気作業の効率化に　※暑さ指数の表示付き

当社トラステック愛知が開発した『CO2KeeperNeo』は、 3密をリアルタイムに可視化する、二酸化炭素濃度計です。二酸化炭素濃度計・温度計・湿度計・時計、さらに暑さ指数計を小さなケースに収納し、 CO2濃度が1000ppmをこえると、換気扇を作動させ換気を促します。【CO2KeeperNeo 特長】 ■コンパクトなボディに［CO2濃度計・温度計・湿度計・暑さ指数計］のマルチな機能 ■3密をリアルタイムにアラートし、スイッチャで換気扇をON・OFF ■ワイヤレスでPCと接続でき、10台置けば10カ所のCO2濃度測定が可能 ■CO2濃度を常時モニタリングでき、履歴確認もできる ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。

企業：トラステック愛知本社
価格：Other

Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Load cell - Load cell manufactured by BROSA.

Introducing a digital output compatible load cell with high precision, high reliability, and long lifespan. Custom options are available, and we accept small lot orders as well.

Load cells are the flagship products of BROSA, capable of accommodating a wide range of designs and offering custom solutions. Safety standards: Compatible with PLc and PLd. The design incorporates a signal amplifier within the load cell, significantly reducing measurement errors due to cable length. It supports various output signals such as CANopen, PROFINET, and current/voltage outputs. The operating temperature range is also broad (-40 to +80°C), and it is rated up to IP69K, making it suitable for use in harsh environments such as steel mills. Additionally, an optional angle sensor can be installed, allowing for load measurement based on boom angle with a single load cell.

企業：マツイ東京本社
価格：100,000 yen-500,000 yen

Other measuring instruments
Other analytical equipment

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Digital wind speed meter with alarm function 'OT-902D' [Rental]

You can measure the strength of the wind (wind speed) outdoors.

The instantaneous wind speed and average wind speed (10 minutes) can be displayed simply by switching, and it can also sound an alarm when the set warning value is reached. 【Features】 ■ It is a digital anemometer with an alarm that supports generator systems. ■ It is possible to switch between instantaneous wind speed and 10-minute moving average wind speed values using a switch. ■ The alarm level can be easily set using a digital switch, and when the set value is exceeded, it will alert with a flashing display and a buzzer. ■ It is also equipped with terminal contacts for external output.

企業：ソーキ
価格：Other

Anemometer

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Noise Vibration Display Observation Device 'SVD-230' [Rental]

Simultaneously display data from the noise meter and vibration meter, record that data, and expand it into reports such as daily reports.

The noise and vibration meter displays data simultaneously while recording it, allowing for expansion into daily reports and other data formats. Additionally, the adoption of a touch panel display has made it more user-friendly. Being all-weather type, it can be installed outdoors and is capable of automatically recording the calculated results every 10 minutes onto a USB memory stick. 【Features】 ■ Easy settings with the touch panel display ■ Automatic recording of noise and vibration data every 10 minutes onto a USB memory stick ■ Built-in clock automatically calibrated by GPS signal ■ Automatic on/off display function (with timer for automatic off) ■ Lightweight design with aluminum body ■ All-weather type suitable for outdoor installation ■ Instantaneous noise and vibration levels displayed every second on a large digital display

企業：ソーキ
価格：Other

Vibration and Sound Level Meter

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Laser scanner seismic reinforcement measurement

Using a 3D laser scanner, we provide a comprehensive service from seismic reinforcement construction to drawing creation and manufacturing! [Case Study]

Our company conducts seismic reinforcement measurement, analysis, modeling, drawing creation, and production using 3D laser scanners. By measuring from both ground and aerial perspectives, we can achieve seamless measurements. With a backpack-type scanner, we reduce time and costs. It allows for an easy understanding of the overall picture at about a quarter of the cost of fixed scanners. 【Features】 ■ Seamless measurements by measuring from both ground and aerial perspectives ■ Backpack-type for time and cost reduction ■ Easy understanding of the overall picture at about a quarter of the cost of fixed scanners ■ Creation of detailed drawings (general drawings, production drawings, material procurement lists, interference diagrams) ■ Suitable for safety management tasks before construction (scaffolding, crane access points, interference) *For more details, please refer to the PDF materials or feel free to contact us.

企業：佐藤プランニング
価格：Other

Distance measuring device/length measuring device

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Portable Self-Recording Water Pressure Meter FJN-501C

The FJN-501C allows for water pressure management by recording water pressure fluctuations with three adjustable settings of 15 minutes, 30 minutes, and 60 minutes.

Ensuring stable water pressure, recording pressure fluctuations to understand appropriate pressure levels, identifying issues such as poor water supply, the need for pressure reduction, and checking for leaks, allows for rapid response and measures to be implemented through data collection, enabling more relaxed water pressure management. Additionally, it can be utilized as feedback data for direct water supply and the improvement and strengthening of pipeline networks.

企業：レックス測定キューブ
価格：100,000 yen-500,000 yen

Sanitary fixtures
Waterproofing work
Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Portable Self-Recording Water Pressure Meter FJN-501A

It has a time recording switch function with five levels of duration, allowing for accurate recording of changes in water pressure over time. There are two types with measurement ranges of 1.0, 1.4 MPa and 2.0 MPa.

This device can record water pressure fluctuations from 4 hours to 168 hours at any time, and it has the functionality of five units (Type A) in one device. Types with measurement ranges of 1.0, 1.4 MPa, and 2.0 MPa are available. *Please choose from the two measurement range options. By ensuring stable water pressure and recording fluctuations, it allows for understanding appropriate water pressure, identifying issues such as poor water supply, the need for pressure reduction, and checking for leaks. Collecting this data enables prompt responses and measures, facilitating effective water pressure management. Additionally, it can be utilized as feedback data for direct water supply and the maintenance and strengthening of pipeline networks.

企業：レックス測定キューブ
価格：100,000 yen-500,000 yen

Sanitary fixtures
Waterproofing work
Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

High Concentration Measurement Cosmo Detector 'XP-334' [Rental]

It can detect relatively high concentrations of carbon dioxide (carbon gas) from 0 to 100% VOL.

With just a switch, you can easily switch everything, making it highly user-friendly. Additionally, it features two types of alarm functions for safe use. 【Features】 ■ Capable of measuring a wide range of concentrations Adopts a thermal conductivity type with a heated wire, allowing measurement across a broad concentration range. ■ Large digital display with minimal reading errors ■ Compact and lightweight body with a high-quality simple design, weighing only 700g, palm-sized ■ Automatic suction with a unique micro air pump Utilizes Cosmos's proprietary micro air pump, making operation extremely simple. ■ Exceptional operability with everything switched by a single button. Can be measured with one hand, ensuring ease of use. Additionally, a single knob allows for ON/OFF and battery check switching. ■ Convenient meter lighting function for dark places ■ Alarm sound can be deactivated with a buzzer switch By operating the buzzer switch, the gas concentration alarm sound can be silenced. ■ Two types of alarm functions included - When the alarm setting concentration (standard specification, 50% VOL) is reached, the lamp and buzzer will automatically alert. - When the battery is running low during use, a continuous alarm sound will indicate that the battery is depleted.

企業：ソーキ
価格：Other

Environmental Survey

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Eddy Current Thickness Gauge LH-373 for Measuring Insulation Coating Thickness on Non-Magnetic Metals

Compact body packed with multifunctionality. Capable of accurately measuring relatively thin coating thicknesses such as anodizing! It also has a data memory of 39,000 points and statistical calculation functions.

This is a thickness gauge for measuring the thickness of insulating coatings on non-magnetic metals. It can accurately measure relatively thin coatings, such as anodized layers. It is equipped with sufficient functions for a thickness gauge. It offers 16 types of settings, including automatic power ON/OFF, upper and lower limit settings, and statistical calculations. Additionally, it features an application memory (calibration curve memory) function. Optional items include a "measurement stand," "dedicated printer," and "data logger software," providing a comprehensive range of products. 【Features】 ■ Mid-range model for eddy current thickness measurement ■ Measurement range from 0 to 2500 μm ■ Data memory for 39,000 points and statistical calculation functions *For more details, please download the PDF or feel free to contact us.

企業：ケツト科学研究所
価格：100,000 yen-500,000 yen

Plastering and painting work
maintenance
Other measuring instruments

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Worker-mounted alarm detection system "Mihari Group (Basic Set)" [Rental]

It is an alarm auxiliary device that alerts both workers and operators within the danger zone of heavy machinery.

This is a set of a monitoring sensor and a helmet sensor that can be attached to the worker's helmet. *Additional helmet sensors and chargers are available as options. 【Features】 ■Detection by sensors. Alerts both workers and drivers to danger. When a worker equipped with the helmet sensor enters the detection area of the monitoring sensor, the driver is alerted by an operator buzzer, and the worker receives an alarm sound from the helmet sensor. The monitoring sensor can switch between 5m and 10m according to the speed of the heavy machinery. The sensor is attached to the rear of the heavy machinery with a magnet. ■Adopts a charging method. Fewer troublesome wires and easy to attach and detach. The monitoring sensor and helmet sensor use a charging method, making them easier to use than relying on the vehicle's power supply. The operator buzzer is attached to the driver's side with a magnet. The buzzer volume can be switched between loud, soft, and silent using a switch. ■Compact and lightweight sensor attached to the helmet, does not interfere with work. The helmet sensor is attached to the helmet with a rubber belt. It is lightweight and easy to attach. The helmet sensor can detect within a reception range of 240° behind the worker. Additionally, when the battery is low, an electronic buzzer and vibration will continuously operate for about 2 minutes to alert the worker.

企業：ソーキ
価格：Other

others

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Measuring Instrument(no) - メーカー・企業と製品の一覧

Measuring Instrumentの製品一覧