Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
76～90 item / All 719 items
In the event of a landslide or abnormal water level, it will be detected by a wire sensor.
The debris flow warning system OT-1407 detects debris flows and abnormal water levels using wire sensors and alerts downstream areas through sirens to prevent disasters. The warning device is powered by solar energy, making it usable in locations without power, such as mountainous areas and riverbanks. For more details, please contact us.
Measuring wideband. It simultaneously measures from low-frequency sounds to noise with one device.
The NL-62 precision sound level meter comes standard with an auto store function, and it is capable of continuous measurement using a timer function or external power supply. We have also focused on ease of use, eliminating the hassle of having to check the manual during measurement. The screen features a large and easy-to-read 3-inch color LCD, and it has added waterproof performance to withstand sudden rain. The Rion NL-62 precision sound level meter will provide maximum support for your measurements. For more details, please contact us.
Checker conforming to the "Method for Determining the Application of Penetrating Concrete Protective Materials (Draft)."
The Concrete Guard Checker CGC-01 is a checker that allows for easy on-site determination of whether a silane-siloxane-based concrete protective agent has been applied, even when it is difficult to tell after drying. It complies with the guidelines set forth in the Independent Administrative Institution, Public Works Research Institute, Document No. 4186, Supplementary Material-3 "Method for Determining Application of Penetrating Concrete Protective Agents (Draft)," and can be utilized to enhance the management and operation efficiency of penetrating agents applied to concrete surfaces. For more details, please contact us.
It is a high-performance and highly reliable temperature and humidity meter with a measurement range of 0 to 100% RH.
The pocket-sized temperature and humidity meter HN-CH uses a newly developed humidity sensor and has a wide measurement range of 0-100% RH, making it a high-performance and highly reliable temperature and humidity meter. It can be used not only as a handheld temperature and humidity meter but also features a memory capacity of up to 8000 data points for both temperature and humidity, allowing it to be used as a data logger. For more details, please contact us.
A pocket-sized ultra-compact vibration meter that can be measured just by pressing it against the surface, weighing 250g!
The Pocketable Vibration Meter VM-63A is an ultra-compact vibration meter weighing 250g that integrates the pickup and body into one unit, making it pocket-sized. With a wide range design, it eliminates the need for range switching, and has been designed with maximum consideration for usability and functionality as a vibration meter for field use. It is suitable for a wide range of applications, including maintenance of industrial machinery and equipment, product development design, and on-site quality control. For more details, please contact us.
It can be easily switched to "count mode," which allows for counting measurements.
The ATB-150K/ATX-150K is an electronic platform scale that can perform weight checks with upper and lower limit functions. It can easily switch to "count mode" for counting measurements. The display can be adjusted to a visible angle in all directions. Additionally, it can be separated by removing the pole. The ATX-150K is an AC power type, while the ATB-150K is a battery-operated type that uses two D batteries and achieves approximately 700 hours of continuous use. For more details, please contact us.
It is designed to be easy to use in both the field and the laboratory.
The Pundit Lab+ ultrasonic testing machine is equipped with the ability to display received waveforms, which can also be shown on a PC. In addition to measuring propagation time, it can measure propagation speed, measurement length, and crack depth, with the capability to store up to 500 measured data points. 【Features】 ○ Direct display of received waveforms ○ Crack depth measurement mode (modified BS method) ○ Punditlink: Data download & received waveform display For more details, please contact us.
Easy to see with a wide-angle lens of 150.8°! Endoscope camera with recording function.
The "G Line Scope GLS-2820" is an internal inspection camera that can inspect all types of piping with its wide-angle lens featuring a diagonal of 150.8°. It is equipped with eight white LEDs, allowing for clear images to be captured, which aids in the early detection of pipe-related issues. Additionally, it has a recording function for still images and videos, enabling detailed analysis after inspections. 【Features】 ■ Utilizes a wide-angle lens with a diagonal of 150.8° ■ Achieves clear images with eight white LEDs ■ Capable of passing through two 90° elbows ■ The camera head has a waterproof structure that can be used at depths of up to 10 meters ■ Equipped with a recording function for saving still images and videos *For more details, please contact us.
High-performance model with detachable probe available! Equipped with a large LCD module!
The high-performance film thickness gauge Leptoscope 2042 features a 90° probe, which is available as an option. The usability has dramatically improved with the display of submenus. The screen resolution has also been upgraded to 128x64 pixels. The device quickly detects any errors in the probe contact method and excludes them from the data, thereby enhancing accuracy. 【Features】 ○ Equipped with a large LCD module (48x24mm) ○ Easy calibration, operation, and verification ○ Also equipped with a backlight for better visibility in dark environments For more details, please contact us.
Simply push a cone vertically into a flatly cut soil section to easily measure the resistance value.
**This product has been discontinued.** **For information regarding similar models, please contact us.** The digital soil hardness meter (push cone) allows for easy measurement of resistance values by simply pushing the cone vertically into a flat soil cross-section. The built-in GPS display can record and save measurement data from up to 900 locations. **Features** - No need to refer to a conversion table to check hardness values - Measurement values are displayed in pascals - Familiar scale values are also displayed in 0.1 mm increments - Can record and save up to 900 measurement data points - Built-in GPS antenna allows for saving location (latitude and longitude) and measurement date and time information along with the measurement data For more details, please contact us.
The definitive version of hazard prediction! It is a suspended load passage warning device that avoids danger with sound.
The "Load Suspended Warning Device (Safety Man)" is a warning device developed to ensure safer operations during crane work. This device is attached to the hook of the crane and alerts workers to dangers with a sound reach of 200 meters. The remote control operation range is between 200m and 300m, and it can register up to 32 units. With a portable small remote control, both the operator and workers can operate it. 【Features】 ○ Avoid danger with sound → High output with a sound reach exceeding 200m ○ Four types of recorded sounds → Volume adjustment and sound switching according to the situation ○ Easily attachable to the crane's hook ○ Simple battery replacement For more details, please contact us or download the catalog.
With the push of a button, automatic execution from oil extraction to measurement and drainage.
This is a compact automatic oil concentration meter that measures the oil concentration in water or seawater. With just the push of a button, it automatically performs everything from oil extraction in the sample to measurement and drainage. The oil in the sample is extracted using the safe solvent H-997, and its content is measured with an infrared analyzer. With a dynamic range of 0 to 200 mg/L, it allows for measurements from low to high concentrations without the need to switch ranges. Oil concentration measurements can be easily and quickly conducted in factories, sewage treatment plants, as well as in river and seawater. 【Features】 - Automatic execution of oil extraction, measurement, and drainage with a single switch - Dynamic range of 0 to 200 mg/L without the need for range switching - Oil is extracted using the safe solvent H-997 - Clear digital display eliminates reading errors - Operating status and error details are displayed in Japanese For more details, please contact us or download the catalog.
It is an extremely small, palm-sized digital display type 1-channel elastic wave velocity measuring instrument.
The PS-1 Model-1814 is an extremely small, palm-sized digital display type 1-channel elastic wave velocity measuring device. It operates on AA batteries, making it easy to use in the field. It measures the velocity of elastic waves propagating from the surface struck by a hammer. 【Features】 ○ Despite being a super compact device, it has excellent performance due to the adoption of LSI (Large Scale Integration). ○ After pressing the reset button, adjusting the gain, and striking the excitation point with a hammer, the arrival time of the elastic wave at the receiving point is displayed. ○ It uses a digital display method, making it easy to read and allowing anyone to measure easily. ○ The entire measuring device set fits into a carrying case, making it convenient to transport. For more details, please contact us or download the catalog.
Insulate the detection section with optical fiber! A phase detector that can be used with bare wires and insulated wires.
The HPI-A6 optical fiber high-voltage phase detector has a high input impedance similar to that of a voltage tester, allowing measurements to be taken over insulated wires and terminals. Its usage and display are the same as conventional overhead distribution line phase detectors, indicating same-phase, different-phase, and phase sequence through sound (buzzer) and light (LED). It boasts excellent electrical characteristics and sufficient insulation resistance (20kV for 1 minute), and it is also highly resistant to temperature, humidity, and shock. 【Features】 - Measurement over insulated wires - Same display method as conventional products - Safe to use with high-voltage bare wires - Compact, lightweight, and easy to use - Test button and battery-saving function For more details, please contact us.
Lightweight and easy to carry! A sound generator used to measure the impact sound insulation performance of building floors.
The weight impact sound generator "YI-01" is used to measure the floor impact sound insulation performance of buildings. It is used in lightweight structures when the impact force characteristics of a standard weight impact source (bang machine) are excessive. 【Features】 ■ Lightweight at 2.5 kg and easy to carry ■ By freely dropping it from a height of 1 meter, a stable impact force of approximately 1500N (Newtons) can be obtained. For more details, please feel free to contact us.
