Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Aug 27, 2025～Sep 23, 2025
This ranking is based on the number of page views on our site.
571～585 item / All 719 items
![Clamp Tester "CL250" [Rental]](https://image.www.ipros.com/public/product/image/e01/2000462921/IPROS07419146206822926915.jpeg?w=280&h=280)
You can measure simply by clamping the wiring while it is powered on, without turning off the power or disconnecting the wiring.
【Features】 ■ Large diameter type (φ55mm) based on AC and DC current measurement ■ AC/DC voltage measurement function, resistance measurement (continuity check) function ■ Equipped with output function
![Leak Clamp Tester "CL360" [Rental]](https://image.www.ipros.com/public/product/image/8f1/2000463430/IPROS46573919643874693794.jpeg?w=280&h=280)
Clamp tester for measuring leakage current.
【Features】 ■ Peak hold function Response time can be switched between approximately 10ms and 100ms. Hold characteristics = Change in indicated value over time is within approximately ±1% F.S after 1 minute of holding (at 23℃±10℃/75% RH or lower, provided there is no condensation). ■ Average value detection method ■ Data hold function with output capability
![Clamp-On Power HiTester '3169' [Rental]](https://image.www.ipros.com/public/product/image/622/2000463655/IPROS12488552383981822476.jpeg?w=280&h=280)
It is a clamp-type power meter that can handle single-phase lines to three-phase four-wire lines with a single unit.
**Features** - Supports up to 4 power lines (common voltage) Can accommodate various measurement lines with 4 circuits (single-phase 2-wire), 2 circuits (three-phase 3-wire), and 1 circuit (three-phase 4-wire) with a single unit. - Abundant measurement functions Simultaneous measurement of voltage, current, power (active/reactive/apparent), cumulative power, power factor, frequency, etc. Additionally, in three-phase 3-wire (3P3W2M) mode, it can display 3 powers/3 currents with 2 voltage/2 current measurements. In three-phase 4-wire mode, it can display neutral line current with 4 current measurements. - 0.5A to 5000A range Can handle large current and large diameter wire measurements with 7 types of clamp current sensors from the CT terminal. - High-speed data storage from 1 cycle (1 waveform) In standard mode cumulative measurement, data can be saved from an interval time of 1 second, and in cumulative and harmonic simultaneous measurement, data can be saved from 1 minute. Furthermore, in short-time mode, data can be saved from the effective value of 1 cycle. - Error connection detection function using vector diagrams The connection confirmation screen with vector display allows for checking disconnections, phase detection, and reverse connection of clamp sensors, ensuring reliable connections even during VT and CT terminal measurements.
![Clam Proger "LR5051" [Rental]](https://image.www.ipros.com/public/default/object/noimage_l.gif?w=280&h=280)
It is a compact logger that easily records load current with a clamp.
【Features】 ■ Compact and lightweight pocket size that doesn't require much installation space ■ Easy-to-understand two-item display at a glance ■ Data can be transferred to a PC without stopping the recording ■ Battery replacement while recording (recording continues for about 30 seconds even after removing the battery) ■ Up to three times the recording capacity compared to conventional models (60,000 data points per channel) ■ Newly equipped with a statistical data recording mode that captures changes without missing them ■ Measurement data is not lost even if the battery runs out ■ Peace of mind in case of accidental operation (backup of the previous recording data)
![Earth High Tester "3151" [Rental]](https://image.www.ipros.com/public/product/image/446/2000463663/IPROS23079875846155322510.jpeg?w=280&h=280)
A grounding resistance meter that can measure grounding resistance from Type A to Type D.
**Features** - Ground resistance meter compliant with JIS standards - Wide measurement range Accurately measures ground resistance from Type A to Type D grounding work. Additionally, measurements can be taken up to 115% of the measurement range. - More stable measurements Easily check the grounding condition of auxiliary grounding rods for greater accuracy. Furthermore, the measurement frequency can be switched to prevent the effects of harmonic ground currents. - Simple measurement function Switching between normal and simple measurement modes can be done with a single touch of a switch. - Overvoltage protection and warning function During simple measurements with commercial power sources, common miswiring is safely warned by an alarm buzzer and overvoltage protection (AC 250V/1 minute). - Resistant to mud and dirt Enhanced dust resistance for measurement switches and dials, improving durability. - More convenient accessories Tangles of measurement cables can be easily organized with a cable winder.
![Fiber Optic High Voltage Phase Detector "HPI-S6 Model" [Rental]](https://image.www.ipros.com/public/product/image/da6/2000463667/IPROS31657041825117454547.jpeg?w=280&h=280)
A multifunctional phase detector with voltage detection function for standalone use and phase sequence function when used in combination.
【Features】 ■ Multifunctional phase detector with voltage detection function for standalone use and phase detection/phase sequence function for combined use ■ Can measure over insulated wires (measurements can be taken from the voltage detection terminals or over insulated wires. *Shielded cables are not applicable) ■ Displays same phase/different phase and phase sequence with sound and light
A multifunctional and high-precision calibrator capable of calibration and evaluation of industrial process equipment and various electronic devices.
■Vertical and Handheld Type This is an easy-to-hold vertical type designed for intuitive operation by pressing direct keys assigned by function. ■Simultaneous Generation and Measurement Traditionally, multiple devices such as standard generators, dial resistors, and multimeters were required, but with the CA150, you can perform regular inspections and operational checks of thermocouples, temperature sensors, and instruments, as well as maintenance of process equipment like transmitters, temperature controllers, and signal converters. ■Loop Power Function It is possible to measure generated current signals while supplying loop power to 2-wire transmitters (up to DC 22mA). ■High Accuracy & Multifunctional Generation and Measurement Generation accuracy is 0.02%, and measurement accuracy is also 0.02%, providing high precision. Generation functions include DC voltage, DC current, resistance, frequency, temperature (thermocouples, temperature sensors), and a 24VDC power supply function for transmitters. Measurement functions include measuring DC voltage, DC current, resistance, frequency, temperature (thermocouples, temperature sensors), and output measurement functions for transmitters.
![Portable Friction Meter '3D Muse TYPE37i' [Rental]](https://image.www.ipros.com/public/product/image/d78/2000463679/IPROS83648645659972504025.jpeg?w=280&h=280)
Not only can the interior floor be measured, but also inclined surfaces, walls, ceilings, and even outdoors, as it is portable and allows for friction measurement anywhere.
【Features】 This is a portable measuring device that can measure the slip characteristics of the surface of various objects. The method for measuring static friction has evolved from using methods such as the incline method and strain gauges to the "MUSE TYPE: 94i," which allows measurement simply by placing it on the flat surface of the object. The "3D MUSE TYPE: 37i" can measure not only horizontal surfaces but also inclined surfaces, walls, ceilings, and all other surfaces, featuring easy operation that does not require experience, as well as improved stability and weight balance during multi-angle measurements.
![Luminance meter "BM-9" [Rental]](https://image.www.ipros.com/public/product/image/183/2000466629/IPROS62507632239374140932.jpeg?w=280&h=280)
This is a handy type luminance meter with excellent usability. It handles the light receiving units BM-910D and BM-920D.
【Features】 ■ You can choose whether to perform zero correction when the power is ON. ■ Auto range and fixed (manual) range can be selected.
![Iron pipe cable detector 'PL-960' [Rental]](https://image.www.ipros.com/public/product/image/43c/2000467478/IPROS74523675113028306913.jpeg?w=280&h=280)
This is a metal pipe and cable locator that can accurately detect the position, direction, and depth of water pipes, gas pipes, and cables.
■ Equipped with 3 frequency bands and natural wave method During detection work, it is equipped with three types of transmission frequencies (27kHz, 83kHz, 334kHz) to select the most efficient frequency for the pipe. The natural wave method involves radio waves inducing dielectric effects in the pipeline, generating a magnetic field. This is a detection method that captures the generated magnetic field with a receiver, eliminating the need for a transmitter. ■ No adjustment of transmitter output required Once the transmitter output is set, detection can be performed from over 100 meters directly below the transmitter, using only the operations on the receiver side. ■ The position and direction of the pipeline are immediately clear It is easy to determine the direction of the desired pipeline, whether to the left or right, through the panel display on the receiver.
![TDR Cable Diagnosis and Measurement Device 'TX2003' [Rental]](https://image.www.ipros.com/public/product/image/874/2000467479/IPROS34112009656840001657.jpeg?w=280&h=280)
It is a portable TDR cable diagnostic device that inspects cables up to 6000 meters on an 11-level scale.
■ The minimum scale is 7m, with a dead zone of only 0.5m, clearly displaying cable faults on a backlit LCD screen with a resolution of 128×64 pixels. ■ It detects and identifies faults in all metal cables with two or more cores. ■ In both modes, small events displayed on the waveform can be enlarged for confirmation with variable amplification from the initial value up to 7dB. ■ It supports high-voltage cables, voltage lines, data lines, communication lines, and CCTV cables with four impedance settings of 20, 50, 75, and 100Ω, and Vp values (propagation speed) settings from 1% to 99% (or converted based on length in microseconds). ■ Weighing only 350g, it is made of durable ABS that meets IP54 standards, making it ideal for outdoor use. ■ Cable length and distance to the fault point can be measured with the push of a button. ■ Equipped with a convenient non-contact cable identification tone signal generator function. ■ Features gain adjustment functionality.
![Cable Explorer "Power Tracer PTR600" [Rental]](https://image.www.ipros.com/public/product/image/5e7/2000467480/IPROS77313994593937860122.jpeg?w=280&h=280)
It can identify terminal devices and intermediate cables without being affected by digital lines or inverter noise.
■ Reception range distance of 7km and range of 3m ■ Pinpoint detection of disconnection, short circuit, and ground fault locations ■ Compatible with unpowered lines (0V) up to live lines of 600VAC ■ Standard feature of a 30-minute auto power-off that can be disabled ■ Can reliably identify removal cables.
![Pocket-sized temperature and humidity meter 'HN-CHTR' [Rental]](https://image.www.ipros.com/public/product/image/c28/2000474124/IPROS57108135027641745462.jpeg?w=280&h=280)
High-performance temperature and humidity meter with a sensor separation type and built-in logging function.
■ Measures relative humidity from 0 to 100% RH using a capacitive temperature sensor. ■ High-precision measurement even in low humidity areas below 20%. ■ Adopts newly developed humidity sensor to improve reproducibility and reliability. ■ A design that fits both handheld and tabletop use. ■ Not only displays in real-time but also functions as a data logger, capable of storing up to 8000 data points for temperature and humidity each. ■ A separated sensor type hygrometer.
![Steel Pipe Cable Detector 'PL-1000' [Rental]](https://image.www.ipros.com/public/product/image/8c9/2000478926/IPROS73090518454752537227.jpeg?w=280&h=280)
This is a metal pipe and cable locator that can accurately detect the position, direction, and depth of water pipes, gas pipes, and cables.
■ Continuous Depth Measurement Function The depth is displayed in real-time on the detection screen. By knowing the changes in depth, it is easy to identify areas where the depth suddenly becomes shallower. ■ Peak Hold Function Even if you pass the desired piping, the receiver remembers the maximum sensitivity. It has become easier to use, even for first-time users. ■ Lateral Depth Measurement Function Depth can be measured even in difficult locations, such as where there are guardrails or metal fences on site. It measures how far the point where the bar graph and marker align is from the pipe axis. The distance from the pipe axis, when doubled, gives the burial depth of the pipe. ■ Loop Check Function When the loop method (2-point method) is selected, the resistance value between the two points is displayed in six stages. This allows for confirmation of whether the two points are connected and estimation of the presence of insulating materials.
![Sludge Concentration Meter "ML-54" [Rental]](https://image.www.ipros.com/public/product/image/ded/2000485822/IPROS43141918356612814680.jpeg?w=280&h=280)
The concentration of activated sludge (MLSS) in purification tanks can be easily measured at the sludge interface.
■ Can measure MLSS concentration, water depth, and sludge interface with one unit ■ Compact and lightweight ■ Automatic zero adjustment function ■ Equipped with calculation functions ■ Data memory function included
