Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
166～180 item / All 718 items
Equipped with a small suction pump! This automatic gas collection device achieves stable suction power even under high loads.
It is possible to set a flow rate of 50 to 250 ml/min by attaching a detection tube, etc.
Can be measured accurately in mg/L (or g/L) O2 with minimal operation.
The COD measurement set includes the main measuring device, COD test tubes (25 pieces, 1 set each for low range and medium range), reactor RD125, and vial stand.
We measure the salt content adhering to the surfaces of steel structures such as bridges and large tanks.
- Measures the salt content adhering to the surfaces of steel structures such as bridges and large tanks. - Increases the reliability of cleanliness before painting through measurements with this device. - The measurement cell (sensor part) is fixed with a magnet, so the measurement location must be a flat magnetic material. - Injects pure water with the included syringe and measures the concentration of salt that has dissolved in the pure water. - Approximately 10 mL of pure water is required for a single measurement. Please consult us if you need pure water.
Quality control of concrete, wood, ceramics, bricks, etc.
◆◇◆【Same-Day Service】 With FTS, repairs and calibrations are handled domestically ◆◇◆ The Panzit lab+ is a revolutionary ultrasonic testing machine that enhances the functions of the long-loved "Panzit," which has been effectively used for many years in fields such as concrete, wood, ceramics, and bricks. It allows for various settings tailored to specific purposes, expanding its range of applications.
Used for measuring post-rolling density and void ratio during asphalt laying!
No adjustments for temperature or humidity are necessary; you can easily take measurements just by pointing it at the measurement location. Its handy size allows for one-handed operation, making it easy to carry. Measurement data can be saved, and it is also possible to print the saved data.
It helps prevent the dysfunction of concrete structures!
The proformer corrosion meter adopts the natural potential method, which is incorporated in many standards such as JSCE-E601-2000. By exposing some rebar and connecting cables to pass a weak electric current, it measures the natural potential of the rebar (steel) within the concrete. The measurement values are displayed on the main unit as a color map, and data can also be transferred to a computer.
Measured in 5 time slots! One device can record temperature and humidity changes between day and night! Suitable for manufacturing sites as well.
The Fisca temperature and humidity device is a temperature management tool that can display and record temperature and humidity changes during five preset time periods. The color of the lamp changes every 20 seconds; it shows temperature when red and humidity when blue. Additionally, it can display the temperature and humidity set for the current time and the past five arbitrary times, allowing you to check and manage the temperature and humidity measured the previous night the following morning. The recorded temperature and humidity can also be reset at your desired time. Although it was developed for agricultural use, it can also be utilized for temperature management in manufacturing sites. *For more details, please contact us. 【Features】 ■ Lightweight waterproof plastic box for easy installation ■ Easy-to-read screen even in the dark ■ Extension power cord (optional) ■ 50m temperature sensor cord (optional) *For more details, please refer to the catalog. Feel free to contact us as well.
![[Nondestructive Testing Equipment Rental] Ultrasonic Testing Machine Panzit PL-200](https://image.www.ipros.com/public/product/image/845/2000579299/IPROS17787842397214718112.png?w=280&h=280)
For measuring concrete thickness, crack investigation, and material quality control!
This is the latest model of ultrasonic testing machine that employs a touch panel color LCD for the display device. It has the capability to display waveforms on the screen, allows for changes in gain and pulse voltage, and offers a wide variety of transducer options. **Features** - Capable of waveform display on the screen (zooming and scrolling are also possible) - Gain and pulse voltage can be adjusted - Can measure propagation time, propagation speed, concrete strength, elastic modulus, etc. - Evaluates the uniformity of the test material and detects cracks and other defects - Measures the depth of vertical cracks based on the modified BS method (BS1881) - Measures surface velocity based on the modified BS method (BS1881) - Estimates compressive strength using the correlation of ultrasonic pulse velocity or SONREB.
![[Rental] Asphalt Density Gauge Pave Tracker Plus](https://image.www.ipros.com/public/product/image/acd/2000580174/IPROS25306755090244649356.jpeg?w=280&h=280)
Ensuring the surface quality of asphalt pavement! Used for measuring density and void ratio after compaction during installation!
This is an asphalt density meter that requires no corrections for temperature or moisture and allows for easy measurement simply by placing it at the measurement location. Its handy size enables one-handed operation, making it easy to carry, and it can also store measurement data. It is ideal for measuring the density and void ratio after compaction during asphalt laying. NETIS registration number: KTK-160019-A
Essential for earthwork management! A certified device with a display that can store 10,000 measurement data points internally.
The "FT-102N" is a transparent RI moisture and density meter equipped with a data transfer and storage system via USB memory. The status of the source rod being stored in a dedicated container or in use is indicated by a lamp. An alarm will notify you if the source rod is not stored during instrument charging. This product complies with the "Earthwork Construction Management Guidelines" of the Highway Technology Research Institute. 【Features】 ■ Data transfer to a computer via USB memory ■ Lightweight design of the instrument body ■ Theft and loss prevention features for the source rod ■ Capable of storing 10,000 measurement data points within the instrument ■ Backlight function included *For more details, please refer to the PDF document or feel free to contact us.
Easy operation that anyone can handle! Achieves high cost performance with light scattering method.
The "ME-C101A" is a high-performance dust monitor that allows you to measure air pollution levels numerically. It achieves a low price while maintaining a design faithful to the basics. The light scattering collection structure significantly improves sensitivity by efficiently transmitting scattered light to the light sensor through an aspherical lens. The measurement unit is equivalent to mg/m3, making it suitable for checking suspended dust levels. 【Features】 ■ High consistency with calibrated approved devices ■ Easy operation that anyone can handle ■ Fast measurement results in as little as 30 seconds ■ Dual power supply options (AC adapter / batteries) ■ High-sensitivity light scattering collection structure *For more details, please refer to the PDF document or feel free to contact us.
Obtain pinpoint weather and radiation level information! No need for foundation work or electrical work, and it can be installed anywhere.
The "Integrated Weather Observation and Radiation Sensor" is a measuring device that can obtain pinpoint weather and radiation level information. It can be directly installed at the site where observation is needed. Additionally, it can capture still images through camera photography, allowing for visual confirmation of the site conditions. The measurement information is processed on a server and then distributed over the internet, making it accessible from computers, tablets, or any internet-connected devices. 【Features】 ■ Obtains pinpoint weather and radiation level information ■ Captures still images through camera photography for visual confirmation of site conditions ■ Portable main unit with solar panel and built-in battery for independent power supply ■ No need for foundation work or electrical installation, allowing for flexible placement ■ Can be temporarily moved to the site for observation during emergencies such as natural disasters *For more details, please refer to the related link page or feel free to contact us.
Transforming counting operations with DX! We will make your wish to automatically count banknotes and gift certificates come true!
- Intuitive usability that can be used by people of all ages and genders! - Convenient as it displays the total amount and total number of each currency type! - Compact size that can fit in a small space! - Stress-free high-speed counting of up to 1500 bills per minute! - Automates the recording of counting results! Prevents transcription errors!
A simple wind speed converter using a small omnidirectional (spherical) thermal sensor.
The "AF301" is an omnidirectional type wind speed converter that can easily output wind speed values (4-20mA) by simply supplying DC5V. It features an omnidirectional probe that is less dependent on wind direction, and has a compact design with the sensor and converter integrated. The wind speed range can be selected from 0-2, 0-10, or 0-30 m/s. 【Features】 ■ Compact design with integrated sensor and converter ■ Easily outputs wind speed values (4-20mA) by simply supplying DC5V ■ Omnidirectional probe with low dependence on wind direction ■ Wind speed range selectable from 0-2, 0-10, or 0-30 m/s *For more details, please refer to the related links or feel free to contact us.
