Linear Receiver "LR21-RP" [Rental]
This is a laser receiver for bulldozers. It can be attached to heavy machinery such as bulldozers and hydraulic excavators for excavation and grading work.
Laser sensor for machine control
- Company:ソーキ
- Price:Other
Last Updated: Aggregation Period:May 27, 2026~Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:May 27, 2026~Jun 23, 2026
This ranking is based on the number of page views on our site.
Last Updated: Aggregation Period:May 27, 2026~Jun 23, 2026
This ranking is based on the number of page views on our site.
271~300 item / All 712 items
This is a laser receiver for bulldozers. It can be attached to heavy machinery such as bulldozers and hydraulic excavators for excavation and grading work.
Laser sensor for machine control
It is a portable gas detector that can remotely detect methane and gases containing methane (such as natural gas).
Using infrared absorption spectroscopy technology that utilizes the properties of methane to absorb lasers, gas leaks and accumulations can be quickly detected from a distance. 【Features】 ■ Measurement can be performed from a distance using near-infrared absorption spectroscopy with semiconductor lasers ■ Easy to operate, allowing anyone to perform measurements ■ Continuous use for approximately 6 hours is possible
Long-term continuous observation of DO (dissolved oxygen) and water temperature in the ocean is possible.
Equipped with a high-speed response DO sensor with a standard response time of 0.4 seconds.
This is an analog recorder that detects and records temperature using a bimetal and humidity using hair.
This is an analog recorder that detects and records temperature and humidity using a bimetal for temperature and hair for humidity. The temperature measurement range is from -15 to 40°C, and it is powered by dry batteries.
High-precision vertical alignment is possible with visible light lasers.
High-precision vertical alignment is possible with a visible light laser.
By adopting a low-reflection Type 7 wide monitor, you can reliably check the safety behind you.
■Field of view ■Horizontal: Approximately 120.0° ■Vertical: Approximately 90.0°
It can detect the entry and exit of people and vehicles at parking lots and construction site vehicle entrances and exits.
■Detection range: Outdoor 1 to 11m, Indoor 1 to 15m
This is a traffic vehicle detection system that notifies drivers of the presence of general vehicles passing nearby to construction vehicles departing from the construction entrance.
A vehicle detection system that can notify departing drivers of the presence of general vehicles passing nearby, intended for construction vehicles attempting to depart from the construction entrance. This system is suitable for detecting fast-moving objects (such as traveling vehicles) and consists mainly of infrared irradiation sensors and infrared reflectors. When a vehicle crosses between the sensor and the reflector, the infrared light emitted by the sensor is interrupted, allowing a warning light to notify the driver. Since a single sensor cannot detect the direction of vehicle movement, two sets of sensors are packaged together.
Steel materials can be distinguished into two types: SS400 and SM490 according to JIS standards.
It is possible to distinguish between two types of steel materials, SS400 and SM490, according to JIS standards.
It is a digital type Schmidt hammer.
The measurement sensor is equipped with high resolution and high reproducibility, and basic measurement methods, conversion values, conversions, and evaluations are displayed on the screen. 【Features】 ■ Data transfer to a computer is possible. Data processing can be done with the included software. ■ Operation allows selection of language from five different languages.
The uniaxial compressive strength of the collected rock can be easily estimated.
The uniaxial compressive strength of the collected rock can be estimated on-site. The Bourdon tube manometer is equipped with two gauges, one for 5 MPa and another for 70 MPa, allowing for high-resolution readings at both low and high loads.
It is convenient for tasks performed with a tripod.
It is convenient for tasks performed with a tripod.
The liquid level relay can detect both the upper and lower limits of the liquid level with a single unit. Additionally, the detection information can be output as an alarm to a siren or rotating light.
■Operating temperature range: -10 to 50℃
When a worker enters the dangerous working radius of the backhoe, it provides a warning through sound and vibration. It is a bidirectional safety assistance device that uses infrared and radio waves.
It does not react to surrounding cones or guardrails, so it does not emit unnecessary alarm sounds. *Additional options for the helmet sensor and charger are available. 【Features】 ■Detects with sensors. Alerts both workers and drivers to danger. When a worker equipped with a helmet sensor enters the detection area of the flexible sensor (infrared emitter), the driver is alerted by an operator buzzer, and the worker is notified by an alarm sound from the helmet sensor. The flexible sensor can be extended to match the size of the backhoe. The sensor is mounted at the rear with a magnet. ■Adopts a charging method. Minimal wiring hassle and easy attachment/detachment. The flexible sensor and helmet sensor use a charging method, making them easier to use than relying on the vehicle's power supply. The operator buzzer is attached to the driver's side with a magnet. The buzzer volume can be switched between loud, soft, and silent using a toggle switch. ■Compact and lightweight sensor attached to the helmet, does not interfere with work. The helmet sensor is attached to the helmet with a rubber belt. It is lightweight and easy to install. The helmet sensor can detect within a reception range of 240° behind the worker. Additionally, when the battery is low, an electronic buzzer and vibration will operate continuously for about 2 minutes to alert the worker.
You can measure the strength of the wind (wind speed) outdoors.
The instantaneous wind speed and average wind speed (10 minutes) can be displayed simply by switching, and it can also sound an alarm when the set warning value is reached. 【Features】 ■ It is a digital anemometer with an alarm that supports generator systems. ■ It is possible to switch between instantaneous wind speed and 10-minute moving average wind speed values using a switch. ■ The alarm level can be easily set using a digital switch, and when the set value is exceeded, it will alert with a flashing display and a buzzer. ■ It is also equipped with terminal contacts for external output.
Evaluation of slip on surfaces such as floors, pavements, stairs, ramps, and sports surfaces.
The slip resistance of floors, surfaces, ramps, and stairs is a very important performance aspect in terms of safety and comfort during operation. With the recent increase in awareness of the importance of slip resistance, this portable slip testing device allows for easy and valid measurement of slip resistance on-site.
This is a COD (Chemical Oxygen Demand) meter that allows for rapid and simple measurement, providing a direct reading of the COD value of the sample water in mg/L units.
This is a COD (Chemical Oxygen Demand) meter that allows for the rapid and simple measurement of COD, which is established as an important indicator of water quality pollution for water use, wastewater, and river water under total water quality regulation. It provides a direct reading of the COD value of the sample water in mg/L. 【Features】 ■ Simplified blank measurement ■ Easy-to-understand operation panel
Ideal for managing coarse-grained material embankments. The measurement area is more than ten times that of conventional types.
Rotating at a speed of 1 revolution per minute on the source rod. High-precision data can be measured quickly.
The relative humidity standard measuring instrument is designed to determine when newly installed concrete has sufficiently dried to proceed to the next phase of construction work.
Measurement range: 50 to 95% RH
It is a vibration meter capable of measuring acceleration in three directions: X, Y, and Z.
The measurement mode has two types: instantaneous value and maximum value hold, and it is a vibration measurement system related to the habitability of passenger ships and commercial vessels using the ship vibration measurement card VX-54WS. ■Acceleration measurement is possible in three directions: X, Y, and Z.
It is possible to assess exposure to whole-body vibration.
■Measurement range (when using PV-62) Acceleration (m/s²): 0.3 / 13 / 10 / 30 / 100 / 300 / 1,000
By recording the fluctuations in water pressure in water pipes, it is possible to confirm the presence or absence of leaks.
■Measurement pressure: 0.5/1.0/1.4/2.0 MPa (Note: The measurement water pressure is not switchable) ■Measurement time: 4/12/24/72/168 h (5-step switching)
This is a Schmidt hammer that reduces the hammer impact energy to 1/3. It can be used for measuring lightweight concrete as well as for measuring film and paper roll pressure.
■Measurement range (compressive strength): 10 to 70 N/mm² ■Impact energy: 0.74 N
This is a water level gauge that can display a time-series graph on an LCD panel.
■Measurement range: 0 to 10m, 0 to 5m, 0 to 2m, 0 to 1m *Switchable
This is an electromagnetic probe for SWT-8000-2, 9000, and 8200-2.
Measurement range: 0 to 20mm
This is equipment that combines a wind speed meter and an LED display.
■Measurement range: 0 to 60 m/s ■Sampling interval: Instantaneous value at 1-second intervals / Average value at 1-second intervals ■Alarm output: Primary and secondary alarm output
You can easily measure the average wind speed over a 30-second period. This anemometer is not subject to the Meteorological Business Act. Please use the measurement results for self-management purposes.
■Measurement range: Up to an average wind speed of 22 m/s
It displays the noise level on a large digital display. It can be used for events such as loud voice contests in the neighborhood or within the company.
It displays the noise level on a large digital display. It is easy to hold and reset the maximum value, making it ideal as a loudness meter. It can be used for events such as loud voice contests in neighborhoods or within companies. 【Features】 ■ Easy to operate ■ Easy-to-read large digital display
It is possible to record surface changes caused by landslides and issue an alarm if a change of 2mm or 4mm occurs within one hour.
It can record surface changes caused by landslides and output an alarm if a change of 2mm or 4mm occurs within one hour. ■Alarm settings: 1-hour movement alarm switchable between 2mm/4mm.
The ultrasonic sensor detects people and objects within the detection area and issues a voice warning from the speaker.
The ultrasonic sensor detects people and objects within the detection area and issues a voice warning from the speaker. At the same time, it alerts the operator with a rotating light. 【Features】 ■ Detection method: Ultrasonic reflection wave ■ Detection range ■ Distance: 5m ■ Vertical direction: 1.5m ■ Horizontal direction: 2.5m (may vary depending on the surrounding environment)