Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
16～30 item / All 70 items
The era of fluorescent lights being considered consumables is over!
With the introduction of the LED fluorescent light "GOOD POWER," a reduction of 1,138,800 yen over four and a half years can be achieved for businesses using 100 fluorescent lights, due to savings in electricity costs, fluorescent light purchase costs, and labor costs. (Electricity costs are estimated at 20 yen per kW.)
This is domestically produced FPL/FHP type LED lighting in Japan. It is for the SKRF series with 3 lamps (1 power supply for 3 lamps) and is reasonably priced in terms of cost and installation!
★Sample products available for free rental!!★ *Limited quantity available, so please act quickly. *We will consult with you in advance regarding the rental period. Point 1 ~【Made in Japan】 Achieving top-level high quality, short delivery times, and reliable after-sales service through consistent production at our own Aomori factory. It can be installed in existing compact fluorescent lamps and lighting fixtures (wiring and other construction work is required). Point 2 ~Up to 3 lamps can be connected with one dedicated power supply (note). Installation costs are reduced at an affordable price, making it very reasonable! (Note: The power supply and lamps are limited to our specified products. Please do not install products from other manufacturers.) Point 3 ~【Equipped with 4 levels of dimming function】 No special installation or dimming equipment is required. Brightness can be adjusted in 4 levels using the existing ON/OFF switch. Power output: switches between 100% → 70% → 50% → 30%. Point 4 ~Since it is manufactured in our own factory, we can accommodate various customizations. Examples: Light color: Various options from 3000K to 6500K Sizes: FPL36/FHP32W type, FPL55/FHP45W type, and others.
Significantly improves brightness unevenness with a two-sided LED configuration! A waterproof design makes it suitable for outdoor use as well.
The "FLD-75" is an LED fluorescent light for signage that significantly improves brightness uniformity by placing LEDs on two sides. It is designed to be waterproof, making it safe for outdoor signage use. It contributes to energy savings with high quality and long lifespan. 【Features】 ■ LEDs placed on two sides ■ Improves brightness uniformity on the sign surface ■ Waterproof design ■ Energy-saving, long lifespan, high quality ■ Ideal for replacing fluorescent sign lights *For more details, please refer to the PDF document or feel free to contact us.
The cost of LED lighting products and installation is effectively 0 yen. By reviewing the installation environment of vending machines, electricity costs for lighting can be reduced by about 50%!
This is a unique new service developed with the cooperation of beverage manufacturers to promote the spread of LED lighting and reduce electricity consumption in Japan. We will provide a certain number of LED lights at virtually no cost, depending on the sales performance of the vending machines. －－－－－－－－－－－－－＜ NOTE ＞－－－－－－－－－－－ This service is not intended for the new installation of vending machines or the installation of vending machines from specific beverage manufacturers. The number of LED lights provided may vary based on certain conditions. －－－－－－－－－－－－－－－－－－－－－－－－－－－－－－ Why can we provide LED lighting? This initiative creates benefits for customers, beverage companies, and our company. Customers can introduce LED lighting without any cost burden and can reduce their electricity bills related to lighting by approximately 50% starting from the month after installation. Additionally, beverage companies can improve their profits by reassessing their installation environment, leading to long-term stable income, while our company can realize this scheme by obtaining appropriate profits from the cooperation funds provided by beverage companies.
Wide-range 350-degree illumination! Illuminating the future even wider and brighter. Industry-leading lightweight design.
This product is a 350-degree waterproof LED fluorescent light made of glass/PET film (mass-market type). In addition to its wide-area emission and wide diffusion specifications, it has an IP63 waterproof rating. The wiring on one side improves workability. It offers a brightness of over 2300lm with a power consumption of 16W (equivalent to a 40W type). Additionally, it features a lightweight design at approximately 240g, which is top-class in the industry. 【Features】 ■ 350-degree wide-area emission and wide diffusion specifications ■ IP63 waterproof rating ■ Improved workability with one-sided wiring ■ Brightness of over 2300lm with a power consumption of 16W (equivalent to a 40W type) ■ Top-class lightweight design at approximately 240g *For more details, please refer to the PDF document or feel free to contact us.
Bright and low power consumption LED fluorescent lights are available in lengths of 600mm, 1200mm, and 2400mm, with a G13 base that allows for the use of existing fixtures.
This is a new type of LED fluorescent lamp that is brighter (150-160LM/W) and consumes less power than conventional LED fluorescent lamps. It comes in product variations of 20W type (600mm), 40W type (1200mm), and 110W type (2400mm), and can be used with existing fixtures with a G13 base. It also supports a wide voltage range of AC85V to 265V. With a long design life of 50,000 hours, it effectively reduces electricity costs and the frequency of replacements.
It can be installed with a 110W fluorescent light fixture using milky white polycarbonate and aluminum on the back.
The KFL110W-180W(WW) features a milky white polycarbonate and an aluminum back, and it can be mounted on a 110W fluorescent light fixture. Various specifications of connection cables are included. The light colors are warm white (3000K) and white (6000K), with color temperatures of 3000K and 6000K, and brightness of 625LX at 1.0m. The power consumption is 35W, and the input voltage ranges from AC95 to 245V. The color rendering index is 73 (high color rendering options are also available), the beam angle is 120°, and the operating temperature range is -20 to +55°C. For more details, please contact us or refer to the catalog.
Initial cost 0 yen, maximum installment payment of 6 years, free sample available, currently on loan! Domestic high-brightness, high-efficiency indoor LED fluorescent lights, approximately 5 times longer lasting than conventional fluorescent lights.
The Bright straight tube LED fluorescent lamp for indoor lighting is a high-brightness, high-efficiency LED fluorescent light made in Japan (manufactured by Elebam). Since LED fluorescents do not use harmful substances found in mercury lamps, disposal is easy. Traditional fluorescent lamps used glass, but LED fluorescent lamps use polycarbonate for the tube, making them very resistant to breakage. In the unlikely event of a fall, the risk of injury from shattering is significantly reduced. 【Features】 ■ Energy-saving and environmentally friendly → Easy disposal as it does not use harmful substances from mercury lamps → The aluminum and polycarbonate used are recyclable ■ Safe material that does not shatter when dropped → Polycarbonate is used for the tube → The risk of injury from shattering is low even if dropped ■ Lasts about 5 times longer than traditional fluorescent lamps → Approximately 40,000 hours of long life (compared to the lifespan of traditional fluorescent lamps: about 8,000 to 12,000 hours) → Significantly reduces the hassle and labor costs of replacement For more details, please contact us or download the catalog.
Free sample available for loan! Waterproof design, suitable for outdoor illuminated signs. Made of polycarbonate, it is lightweight and resistant to breakage! Made in Japan.
The "Bright LED Fluorescent Light (Drip-proof Type)" is a domestically produced (by Elebam) high-brightness, high-efficiency LED fluorescent light for signage. It features a drip-proof design with waterproof gaskets at both ends, making it suitable for outdoor signs (inside fixtures). The body is made of polycarbonate, making it lightweight and resistant to breakage, which makes work easier compared to conventional products, and there is no worry about it falling out due to earthquakes. It has a long lifespan of approximately 40,000 hours, significantly reducing lamp replacement costs. We offer two types of products: the standard type with an LED irradiation angle of 150° (internal LED board) and the wide irradiation angle type with an LED irradiation angle of 225° (internal LED board). 【Features】 ■ Extremely bright LED fluorescent light for signage! ■ For energy-saving priorities, we also offer a FL40W type with a power consumption of 19W. ■ The body is made of polycarbonate → Resistant to breakage and lightweight → No worry about it falling out due to earthquakes ■ Reduces electricity costs by about half and contributes to CO2 reduction. For more details, please contact us or download the catalog.
The lightest in the industry! An LED fluorescent light specifically designed for safety with a focus on preventing breakage, based on material and weight.
The "Riaran LED Fluorescent Light" is a new standard LED fluorescent light that emphasizes shatter prevention and lightweight design. Even if the fluorescent light falls during an earthquake or similar event, it will not break, making it particularly recommended for offices, food factories, hospitals, and care facilities. <Product Features> 1. Ultra Lightweight Weighing only 150g, it is the lightest in the industry as of May 2020! (For 40W type) This greatly reduces the risk of falling. 2. Shatter Prevention Even if it falls, it won't break like glass, providing peace of mind. 3. Gentle Brightness With a carefully designed cover, it minimizes glare. 4. LED with Ultra Long Life! Designed for a lifespan of 40,000 hours, reducing the hassle of replacements. 5. Product Lineup Available in 20W and 40W types. *For more details, please refer to the catalog or feel free to contact us.
Improved work efficiency with one-sided power supply! Easy-to-install built-in power supply type fluorescent tube for internally illuminated signboards.
The "Merit GLASSY SIGN LAMP" is a glass straight tube LED fluorescent light that uses glass tubes with excellent light diffusion properties. Since it is made of glass, it has no seams and complies with the waterproof and dustproof protection rating IP65. Being a power-integrated type, maintenance is easy after installation, requiring only bulb replacement. This product has undergone seven durability tests by a third-party organization to ensure quality reliability, and it has been designed and manufactured to pass these durability tests. 【Features】 ■ Easy installation with built-in power supply ■ Waterproof and dustproof design ■ Side-powered for improved work efficiency ■ Designed and manufactured to pass durability tests ■ High-efficiency energy-saving design *For more details, please refer to the PDF document or feel free to contact us.
No installation required! Energy-saving straight LED, 8W, equivalent to 20W. Eco-friendly and bright LED!
■This is an LED fluorescent light that does not require installation. You can use it simply by removing the glow lamp. *Depending on the type of ballast, installation may be necessary. ■Electricity costs are reduced by about half! As you may know, it consumes about half the power of a regular fluorescent light, significantly saving on electricity bills. It has the same brightness as a 20W equivalent fluorescent light, but the power consumption is only 8.0W! ■High efficiency! With a power consumption of 8.0W and a total luminous flux of 950lm, it achieves high efficiency, making it eco-friendly and bright compared to other companies' products. ■Special design results in low heat generation! Since LEDs generate less heat, you won't feel hot under the light compared to regular fluorescent lights. This can also lead to savings on air conditioning in the summer. The light from LEDs contains almost no infrared or ultraviolet rays, which helps reduce fading caused by UV light. Additionally, it minimizes the attraction of insects. ■It is a RoHS compliant product that is environmentally friendly. LEDs do not contain mercury, so they do not emit harmful substances, making them eco-friendly lighting fixtures.
The luminous color and brightness are 720lm for warm white, 790lm for daylight, and 800lm for white.
The KFL20W-ELW(WW) is a 20W LED fluorescent light. The light colors and brightness are warm white (720 lm), daylight (790 lm), and white (800 lm). The color rendering index is warm white (Ra:65), daylight (Ra:75), and white (Ra:80), with color temperatures of warm white (3000K), daylight (4200K), and white (6000K). The total power consumption is 9W, and the input voltage range is AC90V to AC110V (AC185V to AC265V). The beam angle is 120°, and the operating temperature range is up to 55°C (MAX). For more details, please contact us or refer to the catalog.
HID lamp electronic ballast
We accept custom design and manufacturing of electronic ballasts for HID lamps. Electronic Ballasts: 20W to 1000W class Metal Halide Lamps, High-Pressure Mercury Lamps, Xenon Lamps ■ Features: Consultation for various custom specifications - Built-in electronic ballasts for HID lamps - Supports requirements for wattage, digital dimming, and other embedded specifications - Capable of control via external signals - Can also support battery (DC) operation - Can be adapted to the shape of the embedded equipment - Smaller and lighter compared to copper-iron types
LED fluorescent lights with motion sensors that further promote energy-saving effects through LED lighting.
The switch to LED lighting is progressing, but further power savings can be achieved by turning off the lights during times when no one is present. This fluorescent light is equipped with a motion sensor, so it only lights up when there is movement and automatically turns off about 17 seconds after movement stops. It is an LED fluorescent light equivalent to a traditional 40W fluorescent bulb. The power consumption when lit is 18W, which represents a 50% reduction compared to traditional bulbs, and since it turns off when no one is present, the savings effect is even greater.
