更新日： 集計期間:Oct 08, 2025～Nov 04, 2025
※当サイトの各ページの閲覧回数を元に算出したランキングです。
16～30 件を表示 ／ 全 56 件
Waterproof, dustproof, explosion-proof. Safety, stability, environment.
Features: 1. Waterproof (IP40) 2. Designed under the guidance of Japanese engineers, it is refined, very high-end, safe, stable, and environmentally friendly. 3. Total luminous flux: 1200-1400Lm 4. Waterproof, dustproof, explosion-proof. 5. There are no screws in the main body.
For nighttime work in the field and lighting during power outages or disasters! Rechargeable LED fluorescent lights that can be installed anywhere.
"Anywhere Light-kun" is a portable carry LED fluorescent light that incorporates a charging function and battery within the main body of the light. It can illuminate for up to 24 hours (approximately 2.5 hours on a full charge at minimum brightness) and supports three installation methods: "stand," "hook," and "magnet," making it suitable for various usage environments. When using the tripod stand, the height and angle can be freely adjusted. 【Features】 ■ Low heat generation even during long usage ■ Resistant to attracting insects ■ Waterproof design for peace of mind in sudden rain ■ Equipped with a "dimming volume" for stepless brightness adjustment ■ Power consumption is only 8W (when using the battery) ■ Protective cover reduces glare when viewed from close distances *For more details, please refer to the PDF document or feel free to contact us.
An LED lamp for showcase use that utilizes the easily adjustable characteristics of LEDs to make colors appear more vibrant, especially for fresh meat and produce.
LED fluorescent lights for showcases with φ28mm and φ25mm are available in five lengths: 1190mm, 885mm, 580mm, 430mm, and 300mm. 【Features】 ■ Easy installation with 100v-200v free voltage ■ Displays products more beautifully: red appears vivid, green looks fresh ■ Color tone lighting function available ■ Special waterproof socket 'IP65' *If you provide the length, number, color, temperature of the lamps you currently use, and the type of showcase, we can make the best recommendations for you. *For more details, please download the PDF or feel free to contact us.
Wide angle 330 degrees luminous 110lm/W
We have achieved bright LEDs while reducing power consumption by adopting high-brightness SMD (Surface Mount Device) type LEDs. By using high-brightness LED chips, we have achieved sufficient brightness of 1000 lumens with a low power consumption of only 9W. Not only is the brightness impressive, but we also use chips with a high color rendering index of Ra>80, ensuring that colors appear vibrant and do not cause eye fatigue. The use of glass tubes minimizes brightness degradation even after years of use. 【Features】 ○ Emphasis on component selection, investing in finish and quality ○ Adoption of high luminous efficiency LEDs → 110lm/w (bright with low power consumption) ○ Confidence in quality and price → A satisfactory price that meets expectations for quality, brightness, and performance For more details, please contact us or download the catalog.
[Available for rental from 1 free sample] Reduce electricity costs for fluorescent lights! Safer and more secure LED fluorescent lights, Nano LED.
Since it is an LED, it has a lifespan of over 40,000 hours. With a power consumption of 22W including the converter, it can contribute to energy savings of up to about 50%. Not only does the LED fluorescent lamp perform well, but the most important part of the LED fluorescent lamp, known as the "life of the LED," is produced in-house by NanoLED. NanoLED is a manufacturer that originally produced and manufactured circuit boards for televisions and mobile phones, so they utilize their circuit board manufacturing technology to produce LED fluorescent lamps and converters, delivering "brighter lighting" to the entire world.
LED fluorescent lights that meet the highest rank of high color rendering, "Color Rendering Class 4" and "Color Rendering AAA," according to JIS standards.
High Color Rendering Class 4, Color Rendering AAA, 40W Type LED Fluorescent Lamp, Ultra High Color Rendering Ra98, No Installation Required for Glow Type, G13 Base, Flicker-Free, Low Noise, CISPR11, CISPR15, Surge 2KV Compatible, 16W (Equivalent to Conventional 40W), 1800lm, Daylight White 5000K, Dual-Sided Power Supply, 2-Year Warranty [BTL16-Ra98-5000K] 【POINT 1】Cleared the highest rank of JIS standards "High Color Rendering Class 4" and "Color Rendering AAA." 【POINT 2】Equipped with a high-performance power supply, there is no flickering (flicker phenomenon) from the lighting. (Flicker-Free) 【POINT 3】This LED fluorescent lamp complies with CISPR11 and CISPR15 standards for low noise and electromagnetic wave reduction. 【POINT 4】Equipped with a surge 2KV protection circuit (IEC61000-4-5 Level 3 compliant). Recommended as a replacement for the high color rendering AAA fluorescent lamps previously used for "color inspection." Ideal for various scenes such as printing factories, painting factories, food factories, photo studios, art museums, hospitals, showrooms, exhibition halls, beauty salons, jewelry stores, and general merchandise stores.
16W type high lumen, high-quality LED round fluorescent lamp
Direct factory sales, low prices, and the ability to manage delivery times, with 10 years of experience in Japan and a 2-year quality guarantee! 50,000 hours of long lifespan. Electricity costs reduced by half! 205mm, 225mm, 300mm, 375mm ● For more details, please download the catalog or contact us.
Power consumption is about one-third that of fluorescent lights! Additionally, it comes with a dimming function that enhances energy-saving effects.
【Main Features】 ■ Energy-saving: Only 16.3W consumption (2,385lm) for a 40W direct tube type. ■ Dimming Function 【4-step dimming type (switch dimming)】 Can be dimmed to four levels of brightness. No dimming equipment is required. You can adjust the brightness in four steps using the existing switch (ON/OFF). Once set, it remains unchanged even when the power is turned off. In places like hallways or parking lots where strong brightness is not needed, you can dim to 30%, in offices to 70% or 50%. Why not use dimming effectively to save more on electricity bills? <Dimming and Power Consumption> 70% dimming (power consumption 16.3W), 50% dimming (11.7W), 30% dimming (7.0W), 100% dimming (23.4W) ■ Continuous Dimming: Supports continuous dimming using PWM method. If a dimming signal line is present, it can be replaced with LED. ■ Domestic Production: Ensures high quality through consistent production at our own Aomori factory (ISO certified).
Power consumption is about one-third of that of fluorescent lights! Additionally, with the dimming function, energy-saving effects are enhanced.
**Main Features** ■ Energy-saving: Only 16.3W power consumption for a 40W direct tube (2,385lm) ■ Dimming Function **4-step dimming type (switch dimming)**: Can be dimmed to four levels of brightness. No additional dimming equipment is required. You can adjust the brightness in four levels using the existing switch (ON/OFF). Once set, it retains the brightness level even when the power is turned off. In places like hallways or parking lots where strong brightness is not needed, you can dim to 30%, and in offices, you can use 70% or 50% dimming. Why not use dimming effectively to save more on electricity bills? <Dimming and Power Consumption> 70% dimming (power consumption 16.3W), 50% dimming (11.7W), 30% dimming (7.0W), 100% dimming (23.4W) ■ Continuous Dimming: Supports continuous dimming using PWM method. If a dimming signal line is present, it can be replaced with LED. ■ Domestic Production: High quality is ensured through consistent production at our own Aomori factory (ISO certified).
Power consumption is about one-third that of fluorescent lights! Additionally, it has a dimming function that enhances energy-saving effects.
**Main Features** ■ Energy-saving: Only 16.3W power consumption for a direct tube 40W type (2,385lm) ■ Dimming Function **4-step dimming type (switch dimming)**: Can be dimmed to four levels of brightness. No dimming equipment is required. You can adjust the brightness in four levels using the existing switch (ON/OFF). Once set, it will remain unchanged even when the power is turned off. In places like hallways or parking lots where strong brightness is not needed, you can dim to 30%, in offices to 70% or 50%. Why not use dimming effectively to save more on electricity costs? < Dimming and Power Consumption > 70% dimming (power consumption 16.3W), 50% dimming (11.7W), 30% dimming (7.0W), 100% dimming (23.4W) ■ Continuous Dimming: Supports continuous dimming using PWM method. If a dimming signal line is present, it can be replaced with LED. ■ Domestic Production: High quality is ensured through consistent production at our own Aomori factory (ISO certified factory).
![Compact fluorescent lamp type LED bulb [FHT replacement] *While supplies last](https://image.www.ipros.com/public/product/image/4ef/2000302953/IPROS56055386248068546868.jpeg?w=280&h=280)
Base: GX24q type, compatible with conventional bases! *This is a discontinued product, available while supplies last. Please inquire.
This is an alternative LED lamp for the FHT32 and FHT42 models. It comes in two color options: daylight white and warm white.
LED fluorescent lights with motion sensors that further promote energy-saving effects through LED lighting.
The switch to LED lighting is progressing, but further power savings can be achieved by turning off the lights during times when no one is present. This fluorescent light is equipped with a motion sensor, so it only lights up when there is movement and automatically turns off about 17 seconds after movement stops. It is an LED fluorescent light equivalent to a traditional 40W fluorescent bulb. The power consumption when lit is 18W, which represents a 50% reduction compared to traditional bulbs, and since it turns off when no one is present, the savings effect is even greater.
Cumulative sales of 80,000 units of LED straight tube fluorescent lights, 20W type 7W 1000lm, available for immediate delivery.
■Built-in aluminum heat dissipation parts type The aluminum heat dissipation parts commonly found on the back of LED fluorescent lights are integrated, giving it an overall slim impression. ■300° beam angle with a rotatable socket type This model features a wide beam angle and a rotatable socket that can be adjusted according to the direction of the socket, allowing for installation regardless of the fixture shape. It has also been successfully installed as lighting for single-sided signs. ■Compliant with CISPR15, ensuring no noise for safe use. ■For glow-type fixtures, installation is possible simply by removing the glow bulb. It also supports direct wiring on both sides (ballast bypass wiring).
The luminous color and brightness are 720lm for warm white, 790lm for daylight, and 800lm for white.
The KFL20W-ELW(WW) is a 20W LED fluorescent light. The light colors and brightness are warm white (720 lm), daylight (790 lm), and white (800 lm). The color rendering index is warm white (Ra:65), daylight (Ra:75), and white (Ra:80), with color temperatures of warm white (3000K), daylight (4200K), and white (6000K). The total power consumption is 9W, and the input voltage range is AC90V to AC110V (AC185V to AC265V). The beam angle is 120°, and the operating temperature range is up to 55°C (MAX). For more details, please contact us or refer to the catalog.
Significantly improves brightness unevenness with a two-sided LED configuration! A waterproof design makes it suitable for outdoor use as well.
The "FLD-75" is an LED fluorescent light for signage that significantly improves brightness uniformity by placing LEDs on two sides. It is designed to be waterproof, making it safe for outdoor signage use. It contributes to energy savings with high quality and long lifespan. 【Features】 ■ LEDs placed on two sides ■ Improves brightness uniformity on the sign surface ■ Waterproof design ■ Energy-saving, long lifespan, high quality ■ Ideal for replacing fluorescent sign lights *For more details, please refer to the PDF document or feel free to contact us.
