OSRAM General Bulb Type Dimmable LED Lamp
Base (socket) E26
It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.
- 企業:光洋電機
- 価格:Other
更新日: 集計期間:Jul 22, 2026~Aug 18, 2026
※当サイトの各ページの閲覧回数を元に算出したランキングです。
31~46 件を表示 / 全 46 件
Base (socket) E26
It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.
Insect trap use, photocatalyst, resin hardening, etc.
This is a glass tube type LED with a peak wavelength of 365nm in the UV-A range. For insect traps, the diffusion type is recommended, while for photocatalysis and resin curing, the transparent type is recommended.
Equivalent to a straight tube 20W, available in four types: warm white, white, cool white, and daylight.
● Equivalent to 20W straight tube FL20, FLR20 ● Rated input voltage 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but some fixtures using starter tubes can be used without wiring work. (*) For fixtures using starter tubes, you can use the included dummy starter tube to avoid wiring work. (*) When using the dummy starter tube, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter tube and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using power factor correction capacitors, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use with circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.
IP65, equipped with Nichia LEDs, waterproof LED lamp for small signs and small-scale lighting.
The E26 (16W type) and E39 (42W type) can be used with existing gold lighting fixtures, allowing you to utilize the existing product arms and holders as they are. It achieves brightness equivalent to a conventional 300W mercury lamp with just 42W, reducing power consumption by approximately 86%. It uses Nichia-made LEDs, achieving a long lifespan of 60,000 hours.
Highly convenient maintenance-free LED! Ideal for sign displays and interior lighting.
The "G18 Frost/E17 Base" is a maintenance-free LED lamp designed for convenience. By using glass (frosted), it achieves high light distribution and enhances the ability to create ambiance. Furthermore, with a lifespan of 40,000 hours, it is more energy-efficient compared to incandescent bulbs. It is suitable for signage displays and interior lighting fixtures. 【Features】 ■ Ambiance creation ■ Long lifespan ■ Easy to replace *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Waterproof, high-quality LED fluorescent light with a lifespan of 50,000 hours. Reduces electricity costs by half!
Direct factory sales, low prices, and the ability to understand delivery times, 10 years of experience with Japan, 2 years quality guarantee! ● For more details, please download the catalog or contact us.
LED fixtures for replacing mercury lamps. Significantly improved cooling efficiency and contributes to long lifespan. Ideal for energy-saving measures.
【Features】 Current LED lighting is vulnerable to heat, which can accelerate degradation and lead to cases of non-lighting. This possibility has been particularly noted for sealed road lights, security lights, and street lights. "LINDA-AIR" is a dedicated LED lamp for sealed road lights, security lights, and street lights that has successfully achieved innovative heat dissipation technology and weight reduction. 【Installation Examples】 - For replacing existing mercury lamp fixtures. - Suitable for mercury lamp fixtures in factories and urban areas. *For more details, please contact us via the IPROS inquiry form or by phone. *It will be smoother if you mention "I saw it on IPROS." Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire from the link below. External inquiry form: https://www.densin.co.jp/contact/
The production and import/export of fluorescent lamps will end in 2027! Let's start preparing now! <Comparative data on electricity costs for fluorescent lamps and LEDs, estimates available>
Are you aware that fluorescent lights, which have been used in many buildings until now, will cease production and import/export by the end of December 2027? This is known as the "2027 Fluorescent Light Problem." There is a possibility of rising prices for fluorescent lights due to their decreasing availability in the market, as well as difficulties in securing suppliers for the demand to switch to LED. By addressing this issue early, you can reduce electricity costs and avoid spending time and effort on the replacement itself, so if you haven't switched yet, it's advisable to transition to LED as soon as possible. Among the options available, I would like to introduce Philips' "Linear LED Lamp," which is well-known for its electric toothbrushes! Philips' linear LED lamps have a sales record of 40 million units annually worldwide, including Japan, and they are energy-efficient with a 5-year warranty, making them a reliable choice for installation. For more details, please feel free to contact us using the inquiry form below! We also offer free simulations to show how much energy savings you can achieve when switching from fluorescent lights. We provide free estimates and installation simulations as well. If you have any other questions, please feel free to reach out to us using the inquiry form below!
4Way LED lamp! It can be used directly connected to AC power due to wiring work!
The "ORDA-CLT-JU-100" is an LED lamp designed as a replacement for ORDA32W and 40W fluorescent lamps. This product is compatible with both glow and rapid starters, and installation work is not required. Additionally, it can be used directly connected to AC power through wiring work. With a polycarbonate and aluminum frame design, it is resistant to impact, and its rated lifespan is 50,000 hours. 【Main Functions and Features】 ■ No installation work required (compatible with glow and rapid starters) ■ Can be used directly connected to AC power through wiring work ■ Built-in overcurrent and overvoltage protection circuit ■ Impact-resistant with a polycarbonate and aluminum frame design ■ Warranty period: 2 years ■ Rated lifespan: 50,000 hours (This is the time until the total luminous flux decreases to 70%, and it is not the warranty period of the product.) *For more details, please refer to the PDF document or feel free to contact us.
A maintenance-free LED lamp designed for convenience.
The "G18/BA15s" is a compact bulb-shaped LED lamp suitable for taxi lanterns, taking advantage of the features of LEDs. As an LED bulb that brightly illuminates the entire lantern, the letters are clearly visible even on dark night roads. It consumes about 1/10 the power compared to incandescent bulbs, allowing the battery to last longer. It has the same base as incandescent bulbs, making replacement easy. 【Features】 ■ Bright and clear ■ Ultra long lifespan ■ Easy to replace *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Shock resistant! ORDA 32W, 40W fluorescent lamp replacement products.
The "ORDA-CMB-3W-01" is an LED lamp compatible with glow and rapid ballasts that does not require installation work. It features built-in overcurrent and overvoltage protection circuits. Its polycarbonate and aluminum frame construction makes it resistant to impact. The warranty period is 2 years. 【Main Functions and Features】 ■ No installation work required (compatible with glow and rapid ballasts) ■ Can be used with direct AC power connection through wiring work ■ Built-in overcurrent and overvoltage protection circuits ■ Impact-resistant with polycarbonate and aluminum frame construction ■ Design life: 50,000 hours (This is the time until the total luminous flux decreases to 70%, and is not the warranty period of the product.) ■ Warranty period: 2 years *For more details, please refer to the PDF document or feel free to contact us.
Natural light that illuminates the back with a wide distribution! Available in standard and high-power types.
Introducing our "Direct Tube LED Lamp." This product features a natural light that illuminates the back with a wide 300° beam angle. We offer a "Standard Type" that provides energy savings while maintaining the same brightness as before, and a "High Power Type" that is even brighter and more energy-efficient. Additionally, we have 110W (2367mm) and 630/830mm types suitable for use in signs. We support you in proposing suitable lighting plans. 【Features】 <Standard Type> ■ 2640lm 22W ■ 45% reduction in power consumption ■ Luminous efficiency: 120lm/w <High Power Type> ■ 3600lm 28W ■ 38% reduction in power consumption ■ Luminous efficiency: 129lm/w *For more details, please refer to the PDF document or feel free to contact us.
Equivalent to a straight tube 40W, available in four types: warm white, white, cool white, and daylight.
● Equivalent to a 40W straight tube: FL40, FLR40, (FHF32) ● Rated input voltage: 100-240V ● Single-sided power supply / built-in power supply type ● Made of glass ● Basic wiring work on the lighting fixture side is required, but in some fixtures using a starter, it can be used without wiring work. (*) For fixtures using a starter, you can use the included dummy starter to avoid wiring work. (*) When using a dummy starter, there is a possibility of flickering or failure to light due to the condition of the ballast (aging, etc.). In that case, please remove the dummy starter and perform the wiring work for single-sided power supply. (*) Some fixtures, such as those using a power factor correction capacitor ballast, may not be compatible. In that case, bypass wiring work is necessary. ● Do not use with DC power supply under any circumstances. ● Do not use in circuit or emergency lighting fixtures, or exit sign fixtures under any circumstances.
Light color: bulb color, daylight white; Total length: 105mm
It is manufactured by OSRAM, the manufacturer of the old Mitsubishi Osram.
Installation and brightness unchanged, power consumption reduced by up to 65%!
"Smart Square" is an energy-saving LED lamp that serves as a replacement for existing compact fluorescent lighting fixtures of the FPL and FHP types. By simply replacing existing fluorescent lamps, you can achieve up to 50% energy savings on electricity costs. The built-in power supply makes installation easy. Additionally, it is EMC compliant and RoHS certified. It can be used in offices, commercial spaces, and medical institutions where high brightness is required. 【Features】 ■ Compatible with existing fixtures ■ Long lifespan of 40,000 hours ■ Available in 12 different types *For more details, please download the PDF or feel free to contact us.