Joint metal fittings Product List and Ranking from 11 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.

Joint metal fittings Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.

  1. null/null
  2. タツミ Niigata//Building materials, supplies and fixtures manufacturers
  3. null/null
  4. 4 null/null
  5. 5 駒井ハルテック Osaka//General contractors and subcontractors 大阪本店
Go to Company Ranking

Joint metal fittings Product ranking

Last Updated： Aggregation Period:Jul 23, 2025～Aug 19, 2025
This ranking is based on the number of page views on our site.

  1. Joining hardware "Tech One P3" タツミ
  2. Column connection hardware "Shinacorner floor frame specification"
  3. Column connection hardware "Omega Corner 15kN II floor frame specification"
  4. 4 Omega Corner 15kNII
  5. 4 Joining hardware "Tech One" タツミ

Joint metal fittings Product List

31～45 item / All 47 items

Displayed results
Renovation Hagoita Set

Renovation Hagoita Set

It is possible to install without modifying the exterior wall or processing bolt holes!

The "Renovation Hagoita Set" is used for joining horizontal members and columns, as well as for connecting horizontal members to each other. When connecting existing building beams and girders, it can be installed without modifying the exterior walls or processing bolt holes. Due to the long section that receives the bolt threads, it is also sufficiently capable of pulling the horizontal members together. 【Features】 ■ Can be installed on beams perpendicular to the girders without drilling bolt holes ■ Allows for joining horizontal members without modifying the exterior walls ■ Long section that receives the bolt threads ■ Short-term standard joint strength: 11.9 kN *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector "Ribero II"

Double brace connector "Ribero II"

Reduced interference with floor sheathing and hold-down hardware! Bracing connection hardware for wall reinforcement with 2x and 3x strength.

The "Double Brace (Libero II)" is a brace joint hardware designed for wall shear resistance of 2 times and 3 times. It standardizes the use of screws to one type for ease of use and reduces interference with floor plywood and hold-down hardware. Additionally, the symmetrical shape of the hardware allows for installation without distinction between the top, bottom, left, and right of the brace. 【Features】 ■ Standardizes the use of screws to one type ■ Significantly improves work efficiency ■ Allows installation without distinction between the top, bottom, left, and right of the brace ■ Suitable for fixing braces on floor plywood (30mm thick or less) ■ Quality performance tested under the House Plus housing warranty *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1.5 times bracing connector (Libero)

1.5 times bracing connector (Libero)

Can be installed without distinction on the top, bottom, left, or right of the brace ends! Brace connection hardware for a wall multiplier of 1.5 times.

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for wall strength of 1.5 times, which can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, installation is possible even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required for attachment to the foundation ■ Installation possible even with floor plywood between the foundation and hardware ■ Can be installed without distinction in the upper, lower, left, or right ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double brace connector 'Double Brace (Try)'

Double brace connector 'Double Brace (Try)'

Can be installed in any direction: lightweight and compact brace connection hardware.

The "Double Brace (Try)" is used when joining 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and the standard dimensions of the hardware are symmetrical, allowing for installation in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware does not become exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Installable in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Double Bracing Connector 'Double Bracing (Multi)'

Double Bracing Connector 'Double Bracing (Multi)'

No screws needed to fasten to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.

The "Double Brace (Multi)" does not require notching of columns or horizontal members, allowing for the connection of 45mm x 90mm braces (wall strength ratio of 2). Since screws for fastening to horizontal members are not needed, installation is possible even with floor plywood (thickness of 28mm or less). Additionally, the width of the hardware is 45mm, making it more accommodating for internal use. 【Features】 ■ No need to notch columns or horizontal members ■ No screws required for fastening to horizontal members ■ Installation is possible even with floor plywood ■ Better fit for internal use ■ Equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Diagonal brace connection hardware 'Hexa Plate SD'

Diagonal brace connection hardware 'Hexa Plate SD'

The embossed processing prevents the screw heads from being visible! It is possible to directly attach materials like load-bearing panels over the hardware.

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when joining the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ No notching required due to the thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Brace connection hardware 'B-Eaglet Double'

Brace connection hardware 'B-Eaglet Double'

Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where bracing comes at the edge of the joist. This product is used when joining the ends of bracing (wall strength ratio of 2x) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with bracing ■ Can be installed even in places where bracing comes at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate SD"

Column connection hardware "Flat Plate SD"

High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate Slim"

Column connection hardware "Flat Plate Slim"

The construction efficiency is improved with a minimum specification using 5 screws! For joining columns and horizontal members, etc.

The "Flat Plate Slim" is used for the connection of columns and horizontal members. By limiting the number of screws used to five, construction efficiency has improved. It uses "Super Dyma," which has excellent corrosion resistance and does not contain hexavalent chromium compounds. This product has passed quality performance certification tests by the Japan Building Materials Testing Center. 【Features】 ■ N-value 1.1 or less ■ Short-term allowable tensile strength 6.1 kN ■ Material: NSDC570 manufactured by Nippon Steel Corporation ■ Embossed processing on the screw insertion part ■ Surface treatment: Alloy-coated steel sheet "Super Dyma" ZQNK18 chrome-free *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Column connection hardware "Flat Plate Slim Plywood Specification"

Column connection hardware "Flat Plate Slim Plywood Specification"

Introducing column connection hardware for plywood specifications for structural plywood with a thickness of 12mm or less!

The "Flat Plate Slim Plywood Specification" is used for the connection of columns and horizontal members. It can be installed over structural plywood with a thickness of 12mm or less. Please secure 2 dedicated corner bit screws TB-55 on the column side and 3 on the horizontal member side. This product has passed joint performance tests conducted by House Plus Inspection Co., Ltd. 【Features】 ■ Plywood specification ■ N value of 1.0 or less ■ High corrosion resistance and high tensile strength, 0.6mm thickness ■ Short-term standard joint load capacity of 5.7kN ■ Material: NSDC570, manufactured by Nippon Steel Corporation ■ Surface treatment: Alloy-coated steel sheet "Super Dyma," ZQNK18 chrome-free *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-diaphragm type "KH-column joint construction method"

Non-diaphragm type "KH-column joint construction method"

Contributing to significant labor savings! A column-beam joint method that achieves a clean joint.

The "KH-Column Joint Method" is a column-beam connection method that uses non-diaphragm connection hardware to smartly accommodate beam height differences. By simply welding the beam to the wall surface of the "KH-Column Joint," the connection is completed, making it easy to handle beams with height differences or beams installed at an angle, resulting in a clean connection that significantly reduces manufacturing labor. Products are available for square steel pipe columns ranging from 300mm to 600mm, capable of attaching beams with strengths of 400N/mm² and 490N/mm². 【Main Features】 ■ Acquired certification from the Better Living Foundation (CBL SS003-15) ■ In design, the height difference of beams can be freely set regardless of the position of other beam flanges ■ Significant reduction in welding volume and labor at steel fabrication factories ■ A substantial decrease in the number of ultrasonic flaw detection inspection points for columns ■ Easy to ensure dimensional accuracy of steel structures *For more details, please feel free to contact us.

  • Steel construction
  • Structural Materials
  • Joints between components

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[KES Construction Method Example] Commercial Facility 'Sushi Kuine! Kanazawa Teraji Store'

[KES Construction Method Example] Commercial Facility 'Sushi Kuine! Kanazawa Teraji Store'

Introducing a case study of a commercial facility constructed using the "KES method," a joint hardware construction method for wooden buildings.

We would like to introduce a case study of the "KES Method," which utilizes unique joining hardware in wooden construction. 【Case Study】 ■ Design: Tamaya Housing Design Laboratory ■ Location: Kanazawa City, Ishikawa Prefecture ■ Site Area: 1,888.03 m² ■ Total Floor Area: 609.95 m² ■ Building Area: 503.99 m² ■ Number of Floors: 2 above ground *For more details, please refer to the PDF document or feel free to contact us.

  • Housing structure technology/long-term superior housing technology
  • Earthquake-resistant construction method
  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Performance Introduction] Home Connector Method

[Performance Introduction] Home Connector Method

Introducing the achievements of a method for easily and beautifully joining wood in wooden architecture through photographs!

This document introduces the achievements of the "Home Connector Method" handled by Scrimtech Japan Co., Ltd. This method is a technology that allows for the easy, strong, and beautiful joining of wood in wooden construction. The strength and rigidity of the joints are among the highest in existing joining methods, and it is also used as joining hardware for wooden frame structures. 【Featured Achievements (Excerpt)】 ■ Hokkaido Toyako Summit International Media Center ■ Wood Industry Hall (Tokyo Wood Wholesale Cooperative) ■ Asago Community Pool "Whale" ■ Aichi Expo Japan Pavilion Nagakute Venue ■ Kosa Town Comprehensive Welfare Center, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Material] X-mark display hardware (joining hardware for CLT panel construction method)

[Material] X-mark display hardware (joining hardware for CLT panel construction method)

Detailed information about the standard hardware established in 2016 for CLT panel construction methods.

This document introduces the "X-marked hardware" handled by Yabumoto Industrial Co., Ltd. It explains installation examples of the products using diagrams, covering a total of 16 pages. Additionally, it includes a list of load-bearing performance and information on the usage environment and anti-corrosion treatment for joining hardware. Please make use of this information for handling the products. [Contents (partial)] ■ Installation examples of X-marked hardware ■ Tension hardware TB-90 ■ Tension hardware TB-90P ■ Tension hardware TB-150 ■ Tension hardware TB-150P, etc. *For more details, please refer to the PDF document or feel free to contact us.

  • Fittings and fittings work

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Yabumoto Industries: Introduction to Business in Housing, Wooden Structures, Architectural Substructures, and Landscape Fields.

Yabumoto Industries: Introduction to Business in Housing, Wooden Structures, Architectural Substructures, and Landscape Fields.

Custom hardware available! We can accommodate a wide range of requests according to the customer's specifications.

Yabumoto Industry has been selling standard hardware for the 2×4 construction method (C-mark hardware) since 1974, when this method was opened up in our country, in the fields of residential, wooden structures, building foundations, and landscaping. In December 2017, we obtained the first certification for hardware for the CLT panel construction method (X-mark hardware). Including screw-related products and processed steel products that we have handled since our founding, we have continued to contribute to society for many years. 【Product Lineup (Partial)】 ■ Wooden houses, non-residential facilities, medium and large-scale wooden buildings - Hardware for framed wall construction (C-mark) - Hardware for CLT panel construction (χ-mark) - Custom hardware and processed steel products - Bolts, screws, nails *For more details, please refer to the PDF materials or feel free to contact us.

  • Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Joint metal fittings

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.