Joint metal fittings×高尾 - メーカー・企業と製品の一覧

Joint metal fittingsの製品一覧

1～15 件を表示 ／ 全 17 件

表示件数
Double brace connector hardware

Double brace connector hardware

Equivalent certified product to Z-mark hardware (BP-2)! No need to notch the columns and horizontal members, allowing for the connection of brace ends.

The "double brace connector" is used when joining the ends of braces (wall strength factor of 2) that are 45mm x 90mm or larger. The screw-in parts for the base and columns are embossed, allowing for a good fit of the braces. Additionally, in the case of a true wall, the "folded part" is cut out by 60mm, so the connector is not exposed. 【Features】 ■ Embossed processing (screw-in parts for the base and columns) ■ No need to notch the columns or horizontal members, allowing for the joining of brace ends ■ Can be installed in any direction (up, down, left, right) ■ In the case of a true wall, the "folded part" is cut out by 60mm, preventing exposure of the connector ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
"Column Fit" brace connection hardware

"Column Fit" brace connection hardware

A brace joint hardware that allows for the connection of brace ends without the need to notch the horizontal member.

The "Column Fit" is used when connecting a 45mm x 90mm brace (with a wall strength ratio of 2) to a column. Since the standard dimensions of the hardware are symmetrical, it can be installed in any orientation—up, down, left, or right. Additionally, because screws for fastening to the horizontal members are not required, it can be installed even with floor panels in place. 【Features】 ■ No need to notch the horizontal members ■ No screws required for fastening to the horizontal members ■ Can be installed even with floor panels in place ■ Can be installed in any orientation—up, down, left, or right ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Double brace connector (plain)

Double brace connector (plain)

Quality performance tested! A brace connector with embossed processing that hides the screw heads.

The "Double Brace (Plain)" is used when joining the ends of braces that are 45mm x 90mm or larger (wall strength ratio 2 times). Even when installing braces on top of floor plywood, they can be fixed from the side (for floor plywood 28mm thick or less). The screw holes on the brace side are arranged to accommodate the angle of the brace. 【Features】 ■ Can be fixed from the side (for floor plywood 28mm thick or less) ■ Thin with a plate thickness of 1.2mm (conventional brace plates are 2.3mm) ■ The hardware has an embossed finish, so the screw heads do not protrude ■ The screw holes on the brace side can accommodate the angle of the brace ■ Product tested for quality performance by the Japan Building Materials Testing Center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Column connection hardware "Column mounting plate"

Column connection hardware "Column mounting plate"

Introduction of column connection hardware for the joints between the sides of columns and horizontal members, as well as between beams and roof supports!

The "Column Mounting Plate" is used for the connection between the column in the middle passage and the side of the horizontal members, as well as the connection between the beam and the roof supports. Align the main body with the joint between the column and the side of the horizontal members. Please secure it with the dedicated square bit screw TBA-45 (6 pieces). For tightening the dedicated square bit screw TBA-45, please use the separately sold No. 3 square bit. 【Features】 ■ N value 0.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Convenient for joining columns in the middle passage where horizontal members intersect in a cross shape ■ Equivalent certified product to Z-mark hardware (Kasuagai C) *For more details, please refer to the PDF materials or feel free to contact us.

  • Support hardware/opening hardware

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Column Joint Fitting "Small Corner II"

Column Joint Fitting "Small Corner II"

Improved construction efficiency compared to CP-L! This is a column connection hardware that makes it easy to construct vertical walls.

"Small Corner II" is used for the connection of columns and horizontal members. It has short-term standard joint strength, and since it only requires two screws on the horizontal member side and two on the column side with a 43mm screw, it improves construction efficiency compared to CP-L. This product has passed joint performance testing by House Plus Inspection Co., Ltd. 【Features】 ■ N-value of 0.66 or less ■ Improved construction efficiency compared to CP-L ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Easy installation of exterior walls as it is mounted on top of the horizontal member ■ Compact size with a width of 28mm and height of 47mm, allowing for easy installation ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Column connection hardware "Small Corner II for floor plywood specification"

Column connection hardware "Small Corner II for floor plywood specification"

Compatible with thicknesses below 30mm! Installation efficiency with 4 screws. Can be installed over floor plywood.

The "Small Corner II Floor Plywood Specification" can be installed over the floor plywood without cutting it. By simply driving two 75mm screws into the horizontal member and two 43mm screws into the post side, construction efficiency can be improved. 【Features】 ■ N-value 0.81 or less ■ Short-term standard joint strength 4.3kN ■ Compatible with floor plywood up to 30mm thick ■ Product tested for joint performance by House Plus Inspection Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Column connection hardware "Hook Corner"

Column connection hardware "Hook Corner"

Can be installed with 4 screws! Quick installation and easy work at heights.

The "Hook Corner" is a column joint hardware that corresponds to the announcement symbol (ha) with fewer screws and allows for speedy installation of hardware. It can be installed with just four screws, enhancing work efficiency. With dimensions of 30mm in width, 50mm in height, and a thickness of 1.6mm, the product is compact and can be installed neatly. By fixing the product to the column with temporary clips, working at heights becomes easier. 【Features】 ■ Compatible with corner columns ■ N value of 1.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet) structural SGH490 ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Performance test (mid-column type) short-term standard joint strength: 6.7kN ■ Performance test (corner column type) short-term standard joint strength: 6.4kN *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Renovation Hagoita Set

Renovation Hagoita Set

It is possible to install without modifying the exterior wall or processing bolt holes!

The "Renovation Hagoita Set" is used for joining horizontal members and columns, as well as for connecting horizontal members to each other. When connecting existing building beams and girders, it can be installed without modifying the exterior walls or processing bolt holes. Due to the long section that receives the bolt threads, it is also sufficiently capable of pulling the horizontal members together. 【Features】 ■ Can be installed on beams perpendicular to the girders without drilling bolt holes ■ Allows for joining horizontal members without modifying the exterior walls ■ Long section that receives the bolt threads ■ Short-term standard joint strength: 11.9 kN *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Double brace connector "Ribero II"

Double brace connector "Ribero II"

Reduced interference with floor sheathing and hold-down hardware! Bracing connection hardware for wall reinforcement with 2x and 3x strength.

The "Double Brace (Libero II)" is a brace joint hardware designed for wall shear resistance of 2 times and 3 times. It standardizes the use of screws to one type for ease of use and reduces interference with floor plywood and hold-down hardware. Additionally, the symmetrical shape of the hardware allows for installation without distinction between the top, bottom, left, and right of the brace. 【Features】 ■ Standardizes the use of screws to one type ■ Significantly improves work efficiency ■ Allows installation without distinction between the top, bottom, left, and right of the brace ■ Suitable for fixing braces on floor plywood (30mm thick or less) ■ Quality performance tested under the House Plus housing warranty *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
1.5 times bracing connector (Libero)

1.5 times bracing connector (Libero)

Can be installed without distinction on the top, bottom, left, or right of the brace ends! Brace connection hardware for a wall multiplier of 1.5 times.

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for wall strength of 1.5 times, which can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, installation is possible even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required for attachment to the foundation ■ Installation possible even with floor plywood between the foundation and hardware ■ Can be installed without distinction in the upper, lower, left, or right ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Double brace connector 'Double Brace (Try)'

Double brace connector 'Double Brace (Try)'

Can be installed in any direction: lightweight and compact brace connection hardware.

The "Double Brace (Try)" is used when joining 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and the standard dimensions of the hardware are symmetrical, allowing for installation in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware does not become exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Installable in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Double Bracing Connector 'Double Bracing (Multi)'

Double Bracing Connector 'Double Bracing (Multi)'

No screws needed to fasten to the horizontal framing! A brace joint hardware that can be installed even with floor plywood in place.

The "Double Brace (Multi)" does not require notching of columns or horizontal members, allowing for the connection of 45mm x 90mm braces (wall strength ratio of 2). Since screws for fastening to horizontal members are not needed, installation is possible even with floor plywood (thickness of 28mm or less). Additionally, the width of the hardware is 45mm, making it more accommodating for internal use. 【Features】 ■ No need to notch columns or horizontal members ■ No screws required for fastening to horizontal members ■ Installation is possible even with floor plywood ■ Better fit for internal use ■ Equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Diagonal brace connection hardware 'Hexa Plate SD'

Diagonal brace connection hardware 'Hexa Plate SD'

The embossed processing prevents the screw heads from being visible! It is possible to directly attach materials like load-bearing panels over the hardware.

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when joining the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ No notching required due to the thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Brace connection hardware 'B-Eaglet Double'

Brace connection hardware 'B-Eaglet Double'

Internal use compatible! Hardware shape that avoids interference with vertical bolts for hold-downs.

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where bracing comes at the edge of the joist. This product is used when joining the ends of bracing (wall strength ratio of 2x) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with bracing ■ Can be installed even in places where bracing comes at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

  • Joints between components

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録
Column connection hardware "Flat Plate SD"

Column connection hardware "Flat Plate SD"

High corrosion resistance and high tensile strength with a thickness of 0.6mm! It has strength equal to or greater than Yamagata Plate VP.

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

  • Support hardware/opening hardware

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Joint metal fittingsに関連する検索キーワード

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.