Infrared Sensor×セキュリティハウス - List of Manufacturers, Suppliers, Companies and Products

Infrared Sensor Product List

16～30 item / All 40 items

Displayed results
Low power consumption infrared sensor PXB-100SW

Low power consumption infrared sensor PXB-100SW

Low power consumption and capable of wireless operation, 4-stage high-power beam infrared sensor.

■Solar Power Compatible By combining the floodlight with a separately sold solar power unit, it can be used in locations where wiring from both sides is difficult, allowing for single-sided wiring only on the receiver side. Additionally, by adding a solar power unit and a contact input unit on the receiver side, it can support full wireless operation. Therefore, it is possible to maintain surveillance up to 100 meters even in locations where wiring work is challenging. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee against failures or malfunctions caused by lightning strikes. ■Structure Preventing Insects (Insect and Drip Proof Design) Using insect-proof bushings that envelop the electric wires and dedicated gaskets, it achieves dustproof, drip-proof, and insect-proof measures equivalent to IP65. The insect-proof bushing can be cut to fit the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, it enhances the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor PB-IN-200HFC

Infrared Sensor PB-IN-200HFC

Infrared Sensor PB-IN-200HFC

■4-Stage Power Beam Adopts a 4-stage beam simultaneous cutoff method to prevent malfunctions caused by small animals. It features a high-power beam with a distance margin of 10 times. ■Modulation Frequency Switching Function The modulation frequency can be switched in four stages, preventing infrared wraparound and mutual interference. ■Light Emission Power Switching Function The light emission power can be switched in two stages, allowing for efficient settings according to the warning distance. ■Auto Gain Lock Function Within the maximum warning distance, it automatically sets the optimal sensitivity margin for any warning distance. ■External Environment Diagnosis Function If the light reception level decreases due to changes in weather such as dense fog, heavy rain, or snowfall, it will notify you through environmental output. ■Programmable AGC Function Automatically increases light reception sensitivity during bad weather such as dense fog, heavy rain, or frost to prevent malfunctions. ■Alarm Memory Display Function Easily check the sensors that have triggered an alarm. You can choose between auto-reset and manual reset options. ■Sound Check Function Allows for adjustments and confirmations through sound during light axis adjustment, operation checks after installation, alarm memory display, and gain lock confirmation.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor for visitor counter PLC-5B2

Infrared sensor for visitor counter PLC-5B2

This is an infrared sensor for the visitor counter.

■Features ● Infrared sensor for customer counters with a detection range of 5m (real-time output). ● It is a reflective sensor with an integrated light-emitting and light-receiving unit, allowing for wiring work only on the main unit side, which enhances maintainability. ● It uses a retroreflector, allowing for an incident angle of infrared rays of up to 30° (±15°). ● Compatible with all of our customer counter products.

  • Entrance/exit management and personal identification system

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-100EXL

Explosion-proof infrared sensor PXH-100EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

■This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas and Vapor Explosion Protection 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, accommodating most explosive gases. ■Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-100EXH

Explosion-proof infrared sensor PXH-100EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, accommodating explosion grades 1 to 2 and ignition grades G1 to G4, thus covering most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, enabling multi-stage surveillance and long-distance linear span surveillance. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-200EXH

Explosion-proof infrared sensor PXH-200EXH

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage facilities, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof structure and pressure-resistant explosion-proof structure. ■ High-performance explosion-proof sensor with a wide range of applications This product is an explosion-proof infrared sensor that complies with the "Explosion Protection Guidelines for Factory Electrical Equipment (Gas and Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, and is compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof infrared sensor PXH-400EXL

Explosion-proof infrared sensor PXH-400EXL

Infrared sensors that can be used in hazardous locations such as oil refineries, oil storage bases, gas holders, and chemical factories.

This is a high-performance outdoor long-range infrared sensor that combines intrinsic safety explosion-proof construction and pressure-resistant explosion-proof construction. ■ High-performance explosion-proof sensor with a wide application range This product is an explosion-proof infrared sensor that complies with the "Guidelines for Explosion Protection of Electrical Equipment in Factories (Gas Vapor Explosion 2006)" by the Japan Industrial Safety and Health Association. It features an explosion-proof structure of 'iad2G4' that combines "intrinsic safety explosion-proof (ia)" and "pressure-resistant explosion-proof (d)", making it suitable for use in Class I and Class II hazardous locations. It has a wide application range for target gases, covering explosion grades 1 to 2 and ignition grades G1 to G4, making it compatible with most explosive gases. ■ Dual modulation method By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between external light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■ Two types: "L" type and "H" type To prevent mutual interference, we offer two types with different frequencies: "L" type and "H" type, allowing for multi-stage surveillance and long-distance linear span monitoring. ■ Equipped with a light reception sensitivity indicator The light reception sensitivity indicator allows for easy adjustment of the optical axis.

  • Security Sensor Systems
  • Security devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor near-infrared beam interruption type PR-11BE

Infrared sensor near-infrared beam interruption type PR-11BE

Outdoor/indoor mountable one-sided wiring reflective infrared sensor.

■ Convenient one-sided wiring It can be used with one-sided wiring, making it suitable for locations where dual-sided wiring is difficult. Since the lighting and receiving parts are integrated into a reflective sensor, the wiring work only involves the sensor body. Additionally, maintenance is hassle-free. ■ Installable both outdoors and indoors The installation location is not limited to outdoors or indoors. It comes with two types of attenuation sheets for adjusting the light axis, one for outdoor use and one for indoor use. Mounting brackets for poles are also included as standard. (Compatible poles: φ38 to φ45mm) ■ Easy light axis adjustment Light axis adjustment can be done at just one location on the sensor. The adjustment is performed using a sighting device, the included attenuation sheet, and the light sensitivity indicator. ■ Excellent disturbance light characteristics By adopting a special filter that efficiently cuts visible light and enhancing the disturbance light compensation circuit, it is unaffected by changes in illumination of up to 50,000 lux. Influences from sunlight, mercury lamps, fluorescent lights, and car headlights do not pose a problem under normal usage conditions. ■ Freely adjustable monitoring direction The lens can be moved horizontally (±90°) and vertically (±10°), allowing for flexible setting of the monitoring direction, which does not limit the installation location and expands its applications.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor Near-Infrared Beam Blocking Type (Reflective Type) PR-5B

Infrared Sensor Near-Infrared Beam Blocking Type (Reflective Type) PR-5B

Ideal reflective infrared sensor for close-range surveillance.

■ Ideal for close-range monitoring It outputs an alarm signal when an intruder obstructs the path between the reflective sensor and the mirror. It is perfect for monitoring indoor entrances, hallways, stairs, and for notifying visitors at the front door. ■ Compact slim design The thickness of the sensor body is 23.5mm, making it as compact as a pocket calculator. The color and design have been carefully considered to allow for inconspicuous installation on walls, ensuring it does not create any sense of discomfort. ■ Easy installation This is a reflective sensor with an integrated light emission and reception unit, so wiring work is only needed for the main unit. Additionally, maintenance is simplified. ■ Excellent disturbance light characteristics Thanks to a special filter that efficiently cuts visible light and unique measures against disturbance light, it is hardly affected by external light sources such as sunlight. ■ Reflective mirror can be installed within a 30° range Using a retroreflective mirror allows for a comfortable incidence angle of infrared rays up to 30° (±15°). This means installation locations are not limited, and applications are broadened. ■ User-friendly design ● Can be used with a wide range of voltages. (DC10.5V to 26V)

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor Near Infrared Type (Reflective) Indoor 5m Use PR-5BU

Infrared Sensor Near Infrared Type (Reflective) Indoor 5m Use PR-5BU

Indoor embedded infrared sensor available in two types: reflector type (for 5m) and direct reflection type (for 1m).

■Adopts two types of reflection methods It employs an infrared beam interruption method that detects blockage by the human body between the main unit and the reflector, outputting an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security monitoring. ■Easy to install Thanks to the integrated reflection method that combines the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it includes an optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■Uses a retroreflective reflector It uses a highly retroreflective reflector, so as long as the incident angle is within 30° (±15°), it reflects in the direction of the sensor's optical axis, allowing for flexible installation locations and expanding its range of applications.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Infrared Sensor Near Infrared Type (Reflective) Indoor 1m Use PR-1BU

Indoor embedded infrared sensor available in two types: reflector reflection type (for 5m) and direct reflection type (for 1m).

■Adopts two types of reflection methods The infrared beam is reflected by the human body passing through the area, and the infrared beam light entry method detects the light entering the main unit and outputs an alarm. ■Can be installed discreetly and neatly It is compatible with a single switch box, allowing for a neat installation. Additionally, the ultra-thin design with a protrusion of only 7mm during installation enables unobtrusive security. ■Easy to install Thanks to the integrated reflection method of the light-emitting and light-receiving parts, it can be used with wiring only to the main unit. This makes it possible to use the infrared sensor even in locations where wiring cannot be routed due to the building's structure. Furthermore, despite being a recessed type, it has a built-in optical axis adjustment function (±15° horizontally), making post-installation adjustments easy. ■Can detect stationary objects It can detect not only moving objects but also stationary ones, making it suitable for various applications, including security. ■User-friendly design ● Contact switching function that can be set according to the operating system (a contact/b contact) ● Tamper function to prevent vandalism ● Alarm indicator light for operation confirmation (red LED: lights up during alarm) ● Sensitivity adjustment according to the installation location is possible.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor Near-Infrared Beam Blocking Type (Reflective Type) PR-10BA

Infrared Sensor Near-Infrared Beam Blocking Type (Reflective Type) PR-10BA

A reflective infrared sensor with one-sided wiring that can vary the detection direction.

■Freely adjustable monitoring direction The sensor body can be adjusted within a range of 180° left and right, allowing you to freely set the monitoring direction. ■Easy operation confirmation and light axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the light axis adjustment can be made solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving unit, wiring work is only required for the main unit. This also reduces effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector allows for an incident angle of infrared light up to 30° (±15°), providing flexibility. This means installation locations are not limited, and applications can be expanded. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-brackets (BL-10 sold separately) further expands its applications. ● For new construction projects, we recommend the embedded type that does not stand out and does not compromise aesthetics. ● The embedded PR-10BAU comes with an embedded box (for 3-gang switch boxes).

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor, near-infrared beam interruption method, PR-10BAU

Infrared sensor, near-infrared beam interruption method, PR-10BAU

A reflective infrared sensor with one-sided wiring that can vary the detection direction.

■Easy operation confirmation and optical axis adjustment It is equipped with an operation indicator light (red LED), making it easy to confirm operation. Additionally, the optical axis adjustment can be made solely on the sensor side. ■Easy installation As it is a reflective sensor with an integrated light-emitting and light-receiving part, wiring work is only required for the main unit. This also reduces effort during maintenance. ■Installation angle of the reflector can be up to 30° Using a retroreflective reflector, the incident angle of infrared light can accommodate up to 30° (±15°). This allows for flexible installation locations and expands its applications. ■User-friendly design ● Built-in ambient light compensation circuit. ● Capable of detecting stationary objects. ● Using L-bracket (BL-10 sold separately) further expands its applications. ● For new constructions, we recommend the recessed type, which does not stand out and does not compromise aesthetics. ● The recessed PR-10BAU comes with a mounting box (for 3-gang switch box).

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared sensor near-infrared beam interruption type (opposite type) PB-30SU

Infrared sensor near-infrared beam interruption type (opposite type) PB-30SU

Indoor embedded infrared sensor compatible with a single switch box.

■Compatible with single switch boxes It is compatible with commercially available single switch boxes (deep type), allowing for a neat installation with only a 7mm protrusion from the wall due to its slim design, enabling unobtrusive security. Additionally, the molded resin exterior (frame: white / cover: wine red) matches interior decor without compromising aesthetics. ■Light sensitivity adjustment function By attaching the cover to the main unit, it incorporates a light sensitivity adjustment function that automatically increases sensitivity. During installation or inspection, after adjusting the light axis with the cover removed, simply reattaching the cover will automatically enhance sensitivity, providing a more reliable security line. ■AGC circuit It includes an automatic gain control (AGC circuit) that maintains appropriate sensitivity based on the surrounding environment. ■Light power switch The light power can be switched, ensuring optimal sensitivity based on the installation distance. ■Alarm contact switch The alarm output contacts can be switched, making it compatible with any system. 〈a contact (closed during alarm) / b contact (open during alarm)〉

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Infrared Sensor PB-100T

Infrared Sensor PB-100T

Indoor two-beam infrared sensor with standard white cover.

■Strong against external light interference (Dual modulation method) Our unique dual modulation method and photoelectric conversion circuit [patented technology] enhance the ability to distinguish incoming light from external sources (such as sunlight and car headlights), achieving highly reliable surveillance. ■Beam setting possible in any direction Both the projector and receiver can rotate the internal optical system ±90° horizontally, allowing for arbitrary setting of the surveillance direction. ■User-friendly design Wide adjustment range (horizontal angle ±90°, vertical angle ±10°) ■Detection response time adjustment function The detection response speed can be continuously varied from 0.05 to 0.7 seconds using a volume control. This allows for countermeasures against false alarms based on the specific site conditions. ■Modulation frequency switching function This feature is effective when conducting linear surveillance with multiple infrared sensors or during multi-stage surveillance. By switching the modulation frequency of the pulse beams from the projector and receiver, mutual interference can be avoided. (Switching between modulation frequencies from 1CH to 4CH is possible) ■Two-stage beam simultaneous interruption method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, the risk of false activation due to momentary interruptions with time delays is reduced.

  • Security Sensor Systems

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Infrared Sensor

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.