IP Transceiver Product List and Ranking from 52 Manufacturers, Suppliers and Companies

Digital Simple Radio License Station 'XEDC15 / XEDC46'

This is a data communication device for remote monitoring telemetry. XEDC15 operates in the VHF band, while XEDC46 operates in the UHF band.

●XEDC15 (XEDC-15) / XEDC46 (XEDC-46) are digital simple radio data transmission devices manufactured by Alinco. They perform data communication in digital simple radio licensed stations (3A / 3B). ●Data connection is via RS-232C interface with a transmission speed of 4,800 bps (4-level FSK modulation). ●Voice communication is also possible. ●Main application examples: - Remote monitoring of dam and river conditions using still images - Remote monitoring of water levels, rainfall, temperature, and humidity - Transmission of position correction data via GPS ●The VHF band XEDC15 is ideal for mountainous areas and long-distance communication. The UHF band XEDC46 is suitable for use in areas with many channels and high radio usage. ●It is suitable for data communication in locations without internet access or outside mobile phone coverage. ●It can be used with DC12/24V. No DC-DC converter is required. *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

In-vehicle hands-free microphone 'HM-249'

This is a hands-free microphone that is ideal for operating a radio inside a vehicle.

● HM-249 (HM249) is a hands-free microphone for vehicles manufactured by Icom (ICOM). ● It is a hands-free microphone & PTT for Icom's vehicle-mounted IP radios IP500M, IP501M, UHF band digital and analog vehicle-mounted general-purpose radios IC-DU6010S1, IC-DU6010S2, IC-DU6010S3, VHF band digital and analog vehicle-mounted general-purpose radios IC-DV6010S1, and amateur radio equipment ID-5100, ID-4100, IC-2730. ● It is used for operating radios inside vehicles. ● It consists of a large PTT button with an RJ-45 plug cable, a microphone cable, and a remote PTT button cable (the second image shows an installation example). ● By pressing the PTT button, you can switch between transmit and receive modes. While holding down the remote PTT button, you can maintain the transmission state. The large PTT button lights up with an LED during transmission. ● After connecting to the radio, if you need to adjust the volume of the HM-249, you can adjust the output level on the back of the PTT button with a screwdriver. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Less than 10,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Business-use tie pin type earphone microphone (simple type) CTM825

It is a tie-pin type earphone microphone (simple type) with a code clip attached to the cable part, allowing it to be secured to clothing.

●CTM825 (CTM-825) is a tie-pin type earphone microphone (simple type) made by wave CSR. ●It is an earphone microphone for the hybrid transceiver HX827, designed for specific low-power and work communication simultaneous calls. ●This simple type earphone microphone comes with a 2.5mm earphone attached to the tie-pin microphone. The earphone part can be removed. ●The tip of the earphone has a replaceable ear rubber. ●The length of the microphone cable is 70cm, and the length of the earphone cable is 38cm. ●There is a clip on the microphone cable that allows it to be attached to clothing. ●It can transmit and receive with the HX827. ●It supports both simultaneous communication (duplex) and alternating communication (simplex). 【Compatible Models】 Specific low-power and work communication hybrid transceiver ・HX827 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Less than 10,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Commercial Type Tie Pin Earphone Microphone CTM827

This is a headset microphone with an earphone (2.5φ) attached. The earphone part is detachable.

●CTM827 (CTM-827) is a tie-pin type earphone microphone (standard type) made by wave CSR. ●It is an earphone microphone for the specific low-power, work communication simultaneous talk hybrid transceiver HX827. ●This earphone microphone comes with a tie-pin microphone and an earphone (2.5φ). The earphone part is detachable. ●The tip of the earphone has a removable ear rubber. ●The cable length is 73cm for the microphone cable and 50cm for the earphone cable. ●It can transmit and receive with the HX827. ●It supports both simultaneous talk (duplex) and alternating talk (simplex). 【Compatible Models】 Specific low-power, work communication hybrid transceiver ・HX827 For extremely low-priced sales of earphone microphones, batteries, and more, leave it to Excelli. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Less than 10,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CME825 In-Ear Headset Microphone

The connector part of the HX827 main unit serves as a microphone, and detachable earphones are included.

●CME825 (CME-825) is a body-mounted earphone microphone made by Wave CSR. ●It is an earphone microphone for the specific low-power, work communication simultaneous talk hybrid transceiver HX827. ●It can be attached to the HX827 body for transmitting and receiving. ●The connector part attached to the HX827 body serves as the microphone, and a detachable earphone is included. ●It supports both simultaneous talk (duplex) and alternating talk (simplex). 【Compatible Models】 Specific low-power, work communication hybrid transceiver ・HX827 For unbeatable prices on earphone microphones, batteries, and more, trust Exceli. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Less than 10,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wireless Earphone Microphone "BTEK-D01 Set"

This is a product that combines a BT dongle and a BT headset. When transmitting, press the PTT button on the dongle or the wireless device to speak.

The BTEK-D01 set is a wireless earphone microphone made by Ecotechnos. It is a product that combines the BT dongle BTEK-D01 and the BT headset K10C. It can be used with standard, Icom, Motorola, and JVC Kenwood commercial radios. It can transmit and receive. When transmitting, press the PTT button on either the dongle or the radio to speak. The dongle is connected to the radio via a cable, but the headset is wireless. The dongle can be powered directly from the radio, allowing for easy operation without the need for charging. The K10C headset can be used for about 10 hours on a single charge using the included USB cable. Since it allows for cable-free and hands-free calls, it helps prevent accidents caused by cable snags and tangles, and enables conversations without using both hands. It features a large PTT switch that is easy to press even with gloved hands. For extremely low prices on earphone microphones, batteries, and more, trust Excelli. For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Connects above and below ground, allowing up to 6 people to talk simultaneously." BbTALKIN MS

This is a Bluetooth intercom that connects above and below ground, allowing hands-free simultaneous communication for up to six people.

● BbTALKIN MS is a Bluetooth intercom manufactured by ON'S COMPANY. ● With Bluetooth 5.0, the audio quality has become clearer. ● It allows for communication between up to 6 people, connecting above ground and underground. It is a hands-free simultaneous communication type. ● One master unit is installed above ground and one underground, connected by a cable (up to 100m). Each master unit can connect to 3 child units, allowing for hands-free simultaneous communication with a maximum of 6 units between above ground and underground. Clear audio communication is possible even in the complex underground environment. ● The communication distance from the master unit to the child unit is expected to be about 300m. *Note: The communication distance may vary depending on the location. This is just a guideline. ● It enables communication between underground workers and above-ground workers, making it recommended for sewer construction, tunnels, underground work, high-rise building construction, power cranes, bridge construction, surveying work, electrical work, civil engineering, and other work communication. ● It has an IPX8 waterproof rating and IP6X strong dustproof performance, allowing for safe use in rain and dust. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Base station radio device with digital relay function 'RD628'

While using it as a wireless base station, you can expand the communication range of the intrinsically safe explosion-proof radio PD798Ex.

● The RD628 (RD-628) is a digital base station radio device with relay functionality manufactured by Hytera. ● It is a DMR high-output base station radio with a maximum output of 25W. It also has relay functionality. ● Its sturdy casing allows for direct installation without the need for a rack. ● While being used as a radio base station, it can expand the communication range of the intrinsically safe explosion-proof radio PD798Ex. ● It features a compact and lightweight design. ● The output can be adjusted from 1W to 25W. ● It supports two communication lines in digital mode. ● It is compatible with both digital and analog modes and automatically switches between them. ● Other features include: - Built-in mini duplexer (optional) - IP connectivity (digital mode only) (optional) - Floating charge support / built-in AC power supply - Repeater diagnostics and control function (RDAC) ● Recommended for use in petrochemical plants, large commercial facilities, stadiums, oil plants, high-rise buildings, ski resorts, and more. ● Multiple base station radio devices with relay functionality can be connected via IP. ● A license application for general business radio use is required for operation. *For more details, please feel free to contact us.*

Company：エクセリ本社
Price：Other

others
Call device
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Suitable for use under noisy conditions" AUROEA-500

Without being affected by surrounding environmental sounds, you can deliver only your voice to the other person and clearly hear their voice as well. Clear and comfortable communication is possible.

● The AUROEA-500 (AUROEA500) is a Bluetooth connection type made by S.O.W. Co., Ltd. ● It is a headset microphone for radios that connects wirelessly via Bluetooth. ● It is suitable for use in noisy environments, as the special ear pads seal the ears, making it difficult to pick up surrounding noise and effectively capturing only the voice. ● It has an IPX55 dust and water resistance rating. ● The dedicated ear pads (ear plugs) come in two sizes: large and medium, and the ear pad portion can be removed and washed with water. ● The ear pads and headset microphone can be purchased separately. ● The operating time is guaranteed by the manufacturer to be at least 10 hours when new. ● The charging time is approximately 2 to 3 hours, and it can be charged using the included type-C charging cable. ● It can generally connect to any device with Bluetooth functionality, even if it is not listed among the compatible models below. ● When using with Icom radios, it has been verified that the AUROEA500's button toggles ON with two presses of the center button and OFF with one press. Verification with other manufacturers' products is ongoing. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Best for use in noisy environments" AUR-100 / AUR-100PA

Earphone microphone that is difficult to pick up surrounding noise, effectively collects only voice, and is suitable for use in noisy environments.

● The AUR-100 (AURO100) is an earphone microphone from S.O.W. Co., Ltd. under the AURO brand. ● The connector of the AUR-100 is a 3-pole plug. The AUR-100PA does not come with a connector (plug) and has exposed wiring. * The AUR-100PA is intended for individual purchase in cases such as: 1. The AUR-100 has a broken wire, 2. The PTT switch is reused, so to maintain hygiene, one AUR-100 per person is secured. ● It is used in combination with a separately sold PTT switch. ● The earphone part has both earphone and microphone functions. ● It is suitable for use in noisy environments, sealing the ears with special ear pads and picking up voices with the microphone inside. ● Unlike bone conduction, it does not pick up noise from the ground. ● The dedicated ear pads (ear plugs) come in two sizes: large and medium, allowing you to choose according to your ear size. ● The ear pad part can be removed and washed with water. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, feel free to contact us.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Perfect for use in noisy environments" Earphone Microphone AUR-IC05

A headset microphone suitable for use in noisy environments as it effectively captures only sound, and can be used for two-way communication.

The AUR-IC05 (AURIC05) is a PTT switch + earphone microphone set from S.O.W. manufactured under the AURO brand, designed for ICOM 2-pin type digital simple radio use. This earphone microphone connects to accessories compatible with ICOM's 2-pin type digital simple radio. It is for intercom communication. It features special ear pads that seal the ears to pick up the voice with the microphone, making it suitable for use in noisy environments. Unlike bone conduction, it does not pick up noise from the ground. The components included are as follows: - Earphone microphone AUR-100 (length 55cm) x 1 - PTT switch AUR-IC05PA x 1 - Ear pads M and L, 2 of each The dedicated ear pads (ear plugs) come in different sizes, and the ear pad portion can be removed and washed. Ear pads and earphone microphones can be purchased separately. The black button on the PTT switch AUR-IC05PA is the PTT switch, and the gray button is the PTT lock button. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Perfect for use in noisy environments" Earphone Microphone AUR-KW01

A headset microphone suitable for use in noisy environments, designed to effectively capture only sound, and can be used for two-way communication.

● AUR-KW01 (AURKW01) is a PTT switch + earphone microphone set from S.O.W. under the AURO brand, designed for the KENWOOD 2-pin type. ● This earphone microphone can be used with specific low-power transceivers from JVC Kenwood that have a 2-pin accessory connection. ● It is intended for intercom communication. ● It features special ear pads that seal the ears to pick up voice with the microphone, making it suitable for use in noisy environments. ● Unlike bone conduction, it does not pick up noise from the ground. ● The dedicated ear pads (ear plugs) come in various sizes, and the ear pad portion can be removed and washed. ● Ear pads and earphone microphones can be purchased separately. ● The black button on the PTT switch AUR-ST04PA is the PTT switch, and the gray button is the PTT lock button. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualifications required] Wireless guide system transmitter and receiver FC-GT13

A transmitter that does not require a license or qualifications, uses a specific low-power wireless microphone frequency, and allows for easy installation.

● The FC-GT13 (FCGT13) is a transmitter of a wireless guide system manufactured by F.R.C (F.R.C) for specific low-power radio station radio microphone wireless equipment. ● The operating frequency is in the C band, from 322.025 MHz to 322.400 MHz. ● It is for transmission only, so please use it in combination with the separately sold receiver FC-GR13. ● The output is 1mW, so the communication range is said to be between 30m and 100m, but realistically it is considered to be less than 50m. ● The transmitter FC-GT13 sends audio from the included tie-pin microphone MC-2G to the receiver FC-GR13. ● The use of the transmitter FC-GT13 is always with one unit, but there is no limit to the number of receivers FC-GR13 that can be used. ● Both the transmitter and receiver operate on channel 13. ● It operates for about 18 hours with two AA alkaline batteries sold separately. *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualifications required] Wireless guide system receiver FC-GR13

A receiver that does not require a license or qualifications, uses a specific low-power wireless microphone frequency, and allows for easy installation.

● The FC-GR13 (FCGR13) is a receiver for a wireless guide system manufactured by F.R.C (F.R.C). It is designed for use with specific low-power radio stations and radio microphones. ● The operating frequency range is from 322.025 MHz to 322.400 MHz in the C band. ● It is a receiver only, so please use it in combination with the separately sold transmitter FC-GT13. ● Audio is transmitted from the transmitter FC-GT13 to the receiver FC-GR13. ● There is no limit on the number of receivers FC-GR13 that can be used, but only one transmitter FC-GT13 can be used at a time. ● Both the receiver and transmitter operate on channel 13. ● It operates for approximately 11 hours with two AA alkaline batteries (sold separately). *For more details, please refer to the PDF document or feel free to contact us.*

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New Wave Compatible Digital Simple Radio Registration Station IC-D6005N PLUS

A vehicle-mounted digital simple radio registration station compatible with new waves, featuring an enlarged communication range through IP networks and equipped with a large display with a backlight.

The IC-D6005N PLUS is a digital simple radio registered station (new wave compatible product) manufactured by Icom. The supported channels increase by 52 channels for the existing 30 channels of digital simple radio, compatible with the new wave. Additionally, the upper air channels increase from 5 channels to 10 channels compatible with the new wave, totaling 15 channels. *Upper air channels are receive-only. By connecting to an IP network, you can expand the communication area and eliminate dead zones. *Please note that when connected via IP, the scan function, loudspeaker function, and voice recording function cannot be used. When combined with an outdoor wireless LAN system, communication at a city-wide level is possible. The network communication speed is 10Mbps/100Mbps (theoretical value). The IC-D6005N PLUS has a loudspeaker function that outputs the sound spoken into the microphone directly when an external speaker is connected. It has an IP54 dustproof and splash-proof performance, making it suitable for use in outdoor or dusty environments. It is equipped with a secret communication function with 32,767 types of encryption keys. JAN code: 4909723164807 *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

VoIP Router SR-8000VK with IP Phone Service Support

It is a VoIP router that can build a medium-sized IP phone system accommodating IP phones and wireless LAN transceivers.

●The SR-8000VK is a VoIP router manufactured by ICOM. ●It is a SIP router that can build a medium-sized IP telephone system accommodating IP phones and wireless LAN transceivers. ●The SR-8000VK (SR-8000VK #31) supports the following IP telephone lines, similar to the SR-7100VN#31: - Direct connection: Optical direct (KDDI) *Only for SR-8000VK (SR-8000VK #31) - Server connection ●As of October 2023, it can be connected to the following products: - IP phones KX-HDV series KX-HDV130N, KX-HDV230N IP200H, IP210H, IP200PG - Wireless LAN transceivers/IP radios IP100H, IP110H, IP100FS, IP200H, IP210H, IP200PG *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 150MHz band radio equipment WH-150-2H-09

150MHz band rooftop whip (hole-opening type)

The WH-150-2H-09 (WH1502H09) is a rooftop whip antenna for the 150MHz band manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling holes. It is a product with an L-type connector for mounting holes with a diameter of Φ43 to 45mm. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The installation location is the car's rooftop. It features an L-type NJ connector. It is for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is a made-to-order product. Please inquire about the delivery time. Included accessories: 1 tightening ring, 1 tightening tool, and 1 instruction manual. There is also the WH-150-3HA-09 with a straight NJ connector where the element is not bent, and the WH-150-3HA-09 with a straight NJ connector where the element is bent at a 60-degree angle. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For License Bureau] HMG-450-3-09EL 450-470MHz

High-gain element magnet antenna for licensed stations that can be used as an antenna for digital simple radio license stations.

The HMG-450-3-09EL 450-470MHz is a high-gain element magnet antenna for licensed stations manufactured by Japan Antenna. It can be used as an antenna (capacitive ground type 3λ/4 whip antenna) for digital simple radio licensed stations. *A whip antenna is one that has no directionality and can receive and transmit signals from any angle. *λ (lambda) refers to wavelength. Please use it in combination with the separately sold mounting bases MG-BA3-09 (with coaxial cable 3D2V) and MG-BA5-09 (with coaxial cable 5D2V). The antenna element length is 48cm, and the weight is 0.6kg. The supported frequency range is 450MHz to 470MHz. It is the same product as the element of the high-gain whip antenna (magnet type) HMG-450-3B-09 for loop tops. Additionally, there is the HMG-450-3-09EL for a specified frequency within 350-470MHz and the HMG-450-3-09EL 350-370MHz for digital simple radio registered stations. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Antenna for 400MHz band radio equipment WH-450-3H-09

Antenna for a 400MHz band radio device with a hole-mounting installation.

The WH-450-3H-09 (WH4503H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for radios operating in the 400MHz band. This is a whip antenna that requires hole mounting. The mounting hole diameter is φ23mm, and the thickness of the mounting plate should be 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It features an NJ connector. It operates at a specified frequency within the 400MHz range. Please specify the center frequency (fo) in MHz when placing your order. It is a product that complies with safety standards. This is a made-to-order product. Please inquire about the delivery time. Included accessories: One instruction manual. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：10,000 yen-100,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Supports 5G/LTE/Wi-Fi] IP Gateway IP50G

IP gateway compatible with 5G/LTE/Wi-Fi.

The IP50G (IP-50-G) is an IP gateway manufactured by Icom (ICOM). 【Main Features】 ■Embedded Platform The IP50G operates by writing applications developed and designed using the SDK, allowing for the construction of highly flexible systems tailored to user needs. ■Supports Routing Using 5G/LTE Connections It is compatible with various frequency bands of 5G as well as LTE. ■IEEE802.11ax Compliant IP Gateway It enables communication at a theoretical maximum of 1.2Gbps in the 5GHz band and 574Mbps in the 2.4GHz band. ■Dustproof Unit Available for Attachment to the Main Unit By attaching the dedicated option MBZ-2 to the main unit, it can achieve IP5X dustproof performance, making it safe to use in environments with dust, such as factories. It can also be wall-mounted, and fixed to a mast (additional MB-89 required). ■Other Features - Dual SIM support (au/docomo). - Equipped with three programmable function keys that can be set for each user. - Comes with dedicated brackets for wall or ceiling installation.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[No license or qualification required] Alinco DJ-P116R

A compact multi-repeater specialized for relay functions that does not require selecting a installation location.

● The DJ-P116R is a compact multi-repeater manufactured by Alinco for specific low-power use. ● It supports 27 relay channels and up to 4 wireless linked repeaters in an alternating (half-duplex) relay mode. Since wired connections are not required, flexible installation is possible. *Compatible linked repeater devices (as of January 29, 2024): DJ-P240 compatible lot, DJ-PX7, DJ-PHM20, DJ-P322, DJ-P113R, DR-PM300SE ● It has become smaller than conventional repeaters, increasing installation flexibility. Additionally, its compact size allows for discreet placement without disrupting the atmosphere of a store. ● Equipped with a high-performance noise cancellation feature that reduces environmental sounds (background noise) picked up by the radio, enabling clearer conversations than before. ● Settings can be configured using dedicated software or the remote control mode of compatible subunits. Configuration is possible even in environments without a PC. ● It adopts a foldable and rotatable high-performance 1/4λ antenna. ● Designed for indoor installation. ● Installation is possible from a household power supply of AC100V. Even during linked relay operation, it consumes a maximum of about 220mA, which is low for approximately two small transceivers. *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

National Simultaneous Call IP Phone App IP200APP

An IP phone app that allows real-time simultaneous calls like a phone anywhere in Japan, as long as you are within a mobile phone network area or a WiFi environment.

●IP200APP is an IP phone application made by Icom. ●IP200APP is a smartphone application for businesses compatible with iOS and Android devices. Personal contracts are not available. ●The usage area is nationwide in Japan, as long as you are within the mobile phone network area or under a WiFi environment. You can use internal calls from your smartphone even when you are not in the office. ●It has features equivalent to business phones and IP transceivers. ●You can make internal, external, and group calls from the smartphone app. ●As an optional service, it can be linked with the positioning monitor software PM-IP500. By utilizing the location information of the smartphone, the location of the person holding the device can be displayed on the administrator's PC or tablet. ●There are two ways to obtain IP200APP: 1. For iPhone users, it can be downloaded from the App Store, and for Android users, it can be downloaded from Google Play. Please search for the app using "IP200APP." 2. You can also scan the QR code in the image to install it. *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multifunctional Desktop IP Phone VP-2100

It is a multifunctional desktop IP phone that, while being a business phone, allows one-touch group calls to an IP/WLAN transceiver via a PTT button.

The VP-2100 (VP2100) is a desktop IP phone manufactured by ICOM. It is an IP multifunction phone that allows one-touch group calls to IP/WLAN transceivers using the PTT button. Essentially, it can be used as a business phone, equipped with sufficient features for making and receiving external and internal calls, as well as transfer and hold functions. A major feature is the PTT button on the VP-2100, which enables one-touch group calls (simultaneous calls) and reception to telelink series IP radios (LTE network) and WLAN transceivers, allowing for seamless conversation. It can be used like an internal phone. *It requires connection to the separately sold VoIP router SR-8000V and PoE HUB VE-SW8 with prior setup. As a usage scenario, when a call comes in, you can place the call on hold, press the "PTT button" located at the bottom right to call out to others who can respond via simultaneous group call, and then continue the conversation. It is equipped with four soft keys that can display functions on the screen and 24 programmable keys with indicator lights for status display, making it easy to see whether you are on a call or on hold at a glance.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hands-free Bluetooth Earphone Microphone SSM-BT20

Bluetooth earphone microphone compatible with Bluetooth 5.0, allowing hands-free communication in workplaces such as repair shops and construction sites.

● The SSM-BT20 is a Bluetooth earphone microphone made by Yaesu Musen. ● It complies with the latest Bluetooth 5.0 standard, significantly expanding data transmission speed, communication range, and capacity compared to the previous model SSM-BT10, which used Bluetooth 4.1. ● It can be used in combination with Yaesu Musen's digital simple radio and specific low-power transceivers equipped with Bluetooth functionality. ● Each short press of the PTT button (located on the upper part) of the SSM-BT20 Bluetooth earphone microphone switches between transmission and reception. * Please be sure to press the PTT button after finishing your conversation. If you forget to press it, it will remain in the transmission state. ● When using the convenient VOX function on the radio unit, it automatically enters transmission mode when you start speaking and automatically switches to reception mode when you finish speaking. ● You can make calls without cables and hands-free, preventing accidents caused by cable snags or tangles, and allowing you to talk without using your hands. ● It can be easily charged with the included Type-C USB cable. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：Less than 10,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

150MHz Band Wideband 8-Element Yagi Antenna 8BD-1502

An external type integrator VHF fixed station radio for the 140MHz to 170MHz band, featuring a wideband 8-element Yagi antenna for the 150MHz band.

The 8BD-1502 (8BD1502) is a 150MHz band wideband 8-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. * This antenna is for fixed station radio equipment in the VHF band. * The compatible frequency range is 140MHz to 170MHz. * When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). * It is used when sharing multiple frequencies with a single antenna. * The external matching type designed for weight reduction is based on our unique design. * It offers stable workability and electrical performance. * When selecting antenna mounting brackets, please refer to the recommended bracket list below. * When selecting antenna mounting brackets, please choose the antenna mounting bracket F-1 (round)-K2C (set). * The connector is NJ. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[260MHz Band] 3BD-2502 F=260-275

A wideband 3-element Yagi antenna for fixed stations of municipal digital mobile communication systems used for sharing multiple frequencies with a single antenna.

The 3BD-2502 F=260-275 is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 260 MHz band. * The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. * This is a wideband 3-element Yagi antenna for fixed stations in municipal digital mobile communication systems. * The operating frequency range is 260 to 275 MHz. * It is used for sharing multiple frequencies with a single antenna. * The feed section is highly waterproof and provides stable performance. * The recommended antenna mounting bracket is C-14. * It comes with an NJ connector, which can be connected if the connector on the radio side is NP. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, please feel free to contact our company.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

260MHz Band Wideband 8-Element Yagi Antenna 8BD-2502

The arm, elements, and bracket are made of stainless steel, making it a broadband 8-element Yagi antenna with excellent strength for municipal digital mobile communication system fixed stations.

The 8BD-2502 (8BD2502) is a wideband 8-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. * The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as the director, the radiating element, and the reflector, resulting in high directivity. It was invented in 1926. * This is a wideband 8-element Yagi antenna for fixed stations in municipal digital mobile communication systems. * The supported frequency range is 260 to 275 MHz. * When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). * The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. * The feeding section is highly waterproof, ensuring stable performance. * The recommended antenna mounting hardware is F-1 (round) - KD (set), suitable for arm diameters of φ25 to φ38, adjustable band diameter range of φ300 to φ410, and upper mast diameter range of φ300 to φ389. * It comes with an NJ connector. If the connector on the radio side is NP, it can be connected. For extremely low prices on earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

8-element Yagi antenna 8BD-930 (33MSMA-P) set

SMAP-type 8-element MCA system advanced for transmission and reception compatible with 850MHz to 945MHz.

The 8BD-930(33MSMA-P) set is an 8-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a wideband 8-element Yagi antenna (without cover) 8BD-930 and a connection cable for MCA Advance (33m) 5D2V-NP-SMAP-33. Please be sure to connect the included cable 5D2V-NP-SMAP-33 for use. This is an 8-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The interior of the feeding part is completely sealed and waterproof. This antenna is a unidirectional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (33m) 5D2V-NP-SMAP-33 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

5-element Yagi antenna 5BD-930A (24MSMA-P) set

5-element SMAP-type cover for MCA system advanced, usable for transmission and reception corresponding to 850MHz to 945MHz.

The 5BD-930A(24MSMA-P) set is a cover-equipped 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 5-element Yagi antenna (with cover) 5BD-930A and the connection cable for MCA Advance (24m) 5D2V-NP-SMAP-24. Please be sure to connect the included cable 5D2V-NP-SMAP-24 when using the set. This is a 5-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The antenna body is completely covered by a resin cover, providing excellent waterproofing and weather resistance. Its lightweight design makes installation easy. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, feel free to contact us.

Company：エクセリ本社
Price：100,000 yen-500,000 yen

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

F-type antenna mounting bracket F-21

F-type antenna mounting bracket for attaching an antenna to a pole/mast.

The F-21 (F-21) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ120 to φ410 and antenna mounting section diameters from φ22 to φ32. The product varies depending on the compatible mast diameter and antenna mounting section diameter. - For mast diameter range φ120 to φ190 and antenna mounting section diameter φ22 to φ32: F-21(B) - For mast diameter range φ170 to φ260 and antenna mounting section diameter φ22 to φ32: F-21(C) - For mast diameter range φ230 to φ320 and antenna mounting section diameter φ22 to φ32: F-21(D) - For mast diameter range φ300 to φ410 and antenna mounting section diameter φ22 to φ32: F-21(E) *For more details, please feel free to contact us.

Company：エクセリ本社
Price：Other

others
IP Transceiver

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

IP Transceiver Product List and Ranking from 52 Manufacturers, Suppliers and Companies | IPROS

IP Transceiver Manufacturer, Suppliers and Company Rankings

IP Transceiver Product ranking