Last Updated： Aggregation Period:Oct 29, 2025～Nov 25, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 29, 2025～Nov 25, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 29, 2025～Nov 25, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 146 items
Transporting super heavy objects with a hydraulic cylinder.
The hydraulic self-propelled system with a hydraulic cylinder measuring method safely and accurately transports ultra-heavy objects. It constantly controls the center of gravity balance with an automatic posture control system.
[Exclusive iPros Project] Free distribution of the comprehensive catalog! Product catalog for heavy equipment installation devices that demonstrate power in infrastructure development.
Enerpac provides hydraulic systems for the movement and positioning control of heavy objects, and has achieved results in numerous construction projects and installations across various countries. We design and manufacture solutions tailored to our customers' projects, including machine structures, hydraulic equipment, and electrical control devices. We also offer robust local support and after-sales service within Japan, and if there is an opportunity for implementation, we would very much like to participate in your projects. For more details, please contact us or download the catalog.
We achieved a challenging relocation with Enerpac's hydraulic self-propelled system and wire clamp.
The world's first LNG regasification facility is constructed from 90,000 m3 of cement and 30,000 tons of steel. The relocation required a solution for lifting and sliding the massive structure. With Enerpac's hydraulic self-propelled system and wire clamps (strand jacks), the challenging relocation was achieved. Enerpac successfully lifted the 3,000-ton massive structure and slid it over uneven ground. [Content] ○ LNG facility in the Adriatic Sea For more details, please contact us or download the catalog.
We will introduce examples of the assembly of the hull of British Navy missile destroyers and the transportation of the hull.
The hull section of the British Navy's air defense destroyer is manufactured in five blocks, with the heaviest block weighing as much as 1,400 tons. Prior to the welding work on the hull construction blocks, a synchronized system controlled by Enerpac's digital technology lifts the blocks, measures their weight, and accurately positions them. This has improved work efficiency and quality. Efficiency and accuracy are crucial when unloading new ships. Enerpac has developed a special synchronized lifting system to reduce the total work time and number of workers needed to complete the task. This 12-point lifting system can connect two additional synchronized units (12-point lifting system) for large-scale lifting operations, powered by hydraulic equipment and electronic variable speed control devices. [Contents] - Hull assembly of British Navy missile destroyers - Hull transportation For more details, please contact us or download the catalog.
Introducing the steps to build a work crank system matched to production jigs.
The "Clamp System Setup" introduces four steps to build a work crank system that matches the production jig. Additionally, it includes information on the arrangement of the swing cylinder and work support that achieves savings in machining setup time and improves product quality, as well as details on "support force," "clamping force," "clamping points," and the "requirements for the hydraulic circuit" to ensure the proper operation of the swing cylinder and work support. [Contents] ■ Main Steps of Clamp System Setup ■ Arrangement of Swing Cylinder and Work Support ■ Support Force and Clamping Force ■ Clamping Points ■ Requirements for Hydraulic Circuit, etc. For more details, please refer to the catalog or feel free to contact us.
A quick reference table showing cylinder speed in mm/second assuming 100% efficiency.
The "Cylinder Speed Quick Reference Table" includes technical data on cylinder speed in mm/second (calculated value at 50Hz) assuming 100% efficiency. [Included Content] ■ RC Type ■ RCH Type ■ RRH Type ■ BRD Type ■ RR Type ■ NR Type For more details, please refer to the catalog or feel free to contact us.
A series of hydraulic cylinders for super-large lifts that have reached the Summit Edition.
The "Super Large Lift Hydraulic Cylinder Series" is a product specialized for jack-up operations. We offer a lineup including the "HCG Series Single-Acting Cylinder," "HCR Series Double-Acting Cylinder," and "HCL Series with Safety Lock Nut." This product, combined with Enerpac hydraulic pumps, creates a world-class hydraulic system that ensures the safe and reliable execution of very challenging jack-up operations. 【Features】 ■ Hard coating treatment applied, strong against eccentric loads with high-frequency specifications ■ The exterior and interior of the cylinder are designed to withstand bad weather ■ Easy operation due to the low-friction structure of the safety lock nut ■ Bearing technology prevents wear and internal damage to the cylinder even under strong eccentric loads ■ Low-wear ultra-high-pressure hydraulic seal technology *For more details, please refer to the PDF document or feel free to contact us.
Ultra-flat hydraulic cylinder series capable of a maximum eccentric load of 4%.
The Enapak Ultra Flat Hydraulic Cylinder Series offers both "Tilt Type (CUSP Series)" and "With Stop Ring (CULP Series)." These products are ultra-low profile and can handle a maximum eccentric load of up to 4%. Additionally, the nitro carburizing surface treatment enhances wear resistance and prevents corrosion. 【Features】 ■ CUSP Series - Tilt type - Plunger with a tilt function that accommodates angles from 2° to 4° - The maximum stroke can be visually confirmed by the red line on the plunger ■ CULP Series - With stop ring *For more details, please refer to the PDF document or feel free to contact us.
The return side is also controlled by hydraulic pressure! Coating specifications that can withstand bad weather. The maximum operating pressure is 70 MPa.
The "HCRL Series" is a double-acting hydraulic cylinder that can maintain a load for an extended period thanks to its mechanical safety lock nut. It supports a maximum operating pressure of 70 MPa and allows for hydraulic control of both pushing and retracting. It can withstand eccentric loads of up to approximately 10% of the cylinder's maximum capacity. Designed for high-frequency use with hard coating treatment, the tilt saddle attached to the cylinder can accommodate inclinations of up to 5 degrees. 【Features】 ■ Maximum operating pressure of 70 MPa ■ Coating specifications for both internal and external surfaces to withstand bad weather ■ Equipped with an over-stroke prevention stop ring ■ Low-friction safety lock nut allows for quick tightening *For more details, please refer to the documentation. Feel free to contact us with any inquiries.
Easily, safely, and cost-effectively pull out parts attached to the shaft!
The "LGM Series" is a mechanical lock grip puller suitable for pulling small to medium-sized wheels, sprockets, bearings, and other similar shaft-mounted components. Thanks to the self-centering closure system of the puller, all claws operate simultaneously, allowing a single operator to easily attach and use the puller. 【Features】 ■ Quick and easy setup and installation for a wide range of applications ■ Secure grip with locking claws for safe and simple operation ■ Synchronized claw movement enables a single operator to perform the entire pulling operation ■ Available in configurations with 2 or 3 claws ■ Convenient adjustment handle makes positioning the claws easy, improving work speed *For more details, please refer to the PDF document or feel free to contact us.
Safety and convenience equivalent to a mechanical puller! Designed to reduce operator fatigue.
The "LGH Series" is a hydraulic lock grip puller that provides the same level of safety and convenience as a mechanical puller by applying pulling force through a standard 70MPa hydraulic cylinder. It can exert a maximum thrust of 576kN, making it suitable for the extraction of large components with a maximum diameter of 660mm attached to shafts. In addition to the hydraulic puller, we also offer the "LGHMS Series" master puller set, which includes a cylinder, hose, pump, and more. 【Features of the LGH Series】 ■ Improved pulling capacity by applying hydraulic pulling force, reducing operator fatigue ■ Option to choose between 2-jaw and 3-jaw configurations, regardless of the presence of a hollow cylinder ■ Locking mechanism prevents the puller's jaws from slipping off the workpiece ■ Prevents damage to the spindle when pulling against a flat surface ■ The upper part of the jaws opens wide, allowing use on thick objects *For more details, please refer to the PDF document or feel free to contact us.
Compact design for easy transport to the site! High precision, versatility, and performance are essential for important applications.
The "MCS Series" is a portable torque calibration system suitable for users who use a wide range of controlled bolt tools in various locations. With a compact and lightweight structure, it can be easily used from the field to the truck bed, and it can accurately measure torque in the range of 200 to 10,000 Nm. The tool database function allows for the recording of specific wrench data and calibration results, which can be saved for future use. 【Features】 ■ Accurately measures the torque output of continuous rotation tools in the range of 200 to 10,000 Nm ■ Highly adaptable design, compatible with a wide variety of Enerpac and other brands of wrenches ■ Operates on an internal lithium-ion battery pack or an external power source from DC5V USB ■ The certificate manager function allows for quick and easy creation of calibration certificates ■ Compact design for easy portability, usable in factories, on-site, or inside vehicles ■ Built-in digital interface allows for display, storage, printing, or transfer of torque values to a computer *For more details, please refer to the PDF materials or feel free to contact us.
![[Information] Regarding the Use of Swing Clamp Accessory Arm](https://image.www.ipros.com/public/product/image/a08/2000657066/IPROS27091082281254170500.png?w=280&h=280)
Arm length of the CAL/CAS series: Clamping force: Graphs of maximum flow rate relationships, etc. are included!
The swing clamp's maximum flow rate per clamp cylinder is determined by the length of the arm used, and the intersection of the arm length and curve represents the clamping force. When determining the clamping force, please adjust the arm length within the allowable clamping force and be careful not to damage the plunger rod during installation. This document includes information on the optional long arm "CAL series" and the optional standard arm "CAS series," featuring graphs of "Arm Length: Clamping Force: Maximum Flow Rate Relationship" and "Dimension Diagrams for Mounting Parts When Fabricating Arms." Please take a look. [Contents] ■ Arm Length: Clamping Force: Maximum Flow Rate Relationship Graph ■ Clamping Arm Dimension Table ■ Dimension Table for Arm Fabrication ■ Example of Usage Conditions for the 5kN Series ■ Dimension Diagram for Mounting Parts When Fabricating Arms *For more details, please refer to the PDF document or feel free to contact us.
Achieving cutting-edge speed and precision! A synchronized lifting system with pumps arranged at each point.
The "EVOP Series" is a synchronized lifting system suitable for heavy-duty cylinders with capacities ranging from 3036 to 10644 kN. It is controlled by variable frequency drive (VFD) for synchronized operation, enabling smooth operation and high-precision high-speed lifting. Additionally, we offer products such as the "EVO-SC-25, stroke sensor cable, 25 meters," which can be connected and extended, and the "CLNC12 network controller." 【Features】 ■ The standard control interface allows for easy setup and a variety of lifting operations to choose from. ■ Lifting speed is eight times faster compared to similar methods. ■ The stroke difference between each cylinder during operation is less than 1.0 mm. ■ Built-in warning and stop alarms ensure maximum safety. *For more details, please refer to the PDF materials or feel free to contact us.
Introducing a hydraulic coupler that can be used at temperatures ranging from -40 to 100℃, with a maximum allowable flow rate of 6L/min and a maximum operating pressure of 30MPa.
We would like to introduce our "Automatic Couplers." The block-integrated models "AUC-115" and "AUN-115-PF1/4" are suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. The screw-in models "L391234" and "L391235" have external threads on the coupler body, making them easy to integrate and allowing for direct attachment to manifold blocks. The specifications and connection accuracy are the same as the block-integrated models. 【Features】 ■ Block-integrated type - Suitable for systems that automate the connection and disconnection of hydraulic piping, such as hydraulic cylinders. ■ Screw-in type - Features external threads on the coupler body, making integration easy and allowing for direct attachment to manifold blocks. *For more details, please refer to the PDF document or feel free to contact us.
