Fluid Nozzle - List of Manufacturers, Suppliers, Companies and Products

Fluid Nozzle Product List

46～49 item / All 49 items

Displayed results
2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small spray conical nozzle with a wide flow adjustment range.

The "Charging Cone Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four parts: nozzle tip, core, cap, and adapter, and is a two-fluid charging cone nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two fluids ○ Ultra-compact shape with a total length of about 42mm ○ ON-OFF control function included ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrafine Mist Two-Fluid Nozzle "Quick Fogger"

Ultrafine Mist Two-Fluid Nozzle "Quick Fogger"

A two-fluid nozzle optimal for targeted partial humidification, sterilization, and deodorization.

The ultra-fine mist two-fluid nozzle "Quick Fogger" is a humidification system that does not wet the inside of air conditioning units. 【Features】 Significantly reduces air consumption High specifications with uniform particle size of 7.6 to 11.2 μm Easy setup in limited spaces Variety of flow sizes available 【Details】 Spray amount: (Air pressure 0.3 MPa) Liquid = 1.0 to 4.5 L/h, Air = 30 to 40 L(normal)/min (Spray amount varies depending on siphon height.) Material: Body, cap = PP (polypropylene) Nozzle tip = SUS303 (optional: PTFE) Packing = fluororubber Connection: Air side, liquid side = Rc1/8 Dimensions: Total length 45.9 mm, maximum width 33.5 mm You can use mounting holes compatible with M5 screws and nuts. Spraying Systems, a global brand of spray nozzles, offers a variety of nozzles suitable for various applications based on a track record of over 90,000 items. *For information about spraying nozzles, please download the PDF or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for the Use of Nozzles in the Automotive Industry

Proposal for the Use of Nozzles in the Automotive Industry

Productivity improvement, energy-saving effects, environmental enhancement.

■ Air Blow Small flat air nozzle for blowers, low pressure high flow type blower nozzle ■ Chemical & Oil Spray PulsaJet automatic spray gun + controller ■ Cleaning Clamp-type easy detachable nozzle, two-fluid nozzle + header, two-dimensional rotating cleaning nozzle, three-dimensional rotating cleaning nozzle ■ Cooling Two-fluid high-speed electric spray gun + dedicated controller, mist nozzle + pump unit ■ Heat Mitigation Mist fan

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CRP (AL99)"

1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CRP (AL99)"

A structure that is resistant to clogging! A straight nozzle that generates a strong impact flow.

The "Straight Nozzle (Round Bottom Type) CRP(AL99)" is a straight nozzle that generates a strong impact stream with a narrow, straight spray pattern. When attached to a header pipe, the nozzle inlet protrudes roundly into the pipe, making it less likely for foreign objects to clog the nozzle inlet. The CRP(AL99) series (with ceramic chips) maintains stable performance over a long period due to the use of high-hardness chips. 【Features】 ○ Narrow, straight spray pattern ○ Structure that minimizes the inflow of foreign objects into the nozzle ○ Resistant to clogging ○ Straight nozzle that generates a strong impact stream ○ Excellent wear resistance For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.