Fluid Nozzle - List of Manufacturers, Suppliers, Companies and Products

Fluid Nozzle Product List

31～41 item / All 41 items

Displayed results
2-fluid nozzle "Fan-shaped nozzle VVEA"

2-fluid nozzle "Fan-shaped nozzle VVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle capable of thin spraying in the thickness direction with strong impact force.

The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution. ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm. ○ Capable of spraying with a thin thickness in the thickness direction and strong impact force. ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa. ○ It has a wide flow adjustment range with minimal variation in spray angle. For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DOVEA"

2-fluid nozzle "Fan-shaped nozzle DOVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle with a large flow adjustment range and small spray angle variation.

The "Fan-Shaped Nozzle DOVEA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe. It is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization (a pre-mix type that mixes liquid and compressed air within the nozzle adapter). The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Uniform flow rate and particle size across the entire range ○ Wide adjustment range for spray flow rate with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements ○ Spray angles of 55°, 70°, 95°, and 110° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DDA"

2-fluid nozzle "Fan-shaped nozzle DDA"

Fine mist and medium mist generation! A two-fluid elliptical spray nozzle that produces a large volume of fine mist with a diameter of 50μm or more.

The "Fan-Shaped Nozzle DDA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid elliptical spray nozzle that generates fine mist with an average particle diameter of 50μm or more. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Has an elliptical spray pattern, allowing for wide-area spraying ○ Liquid pressurization type that sprays at a pressure of approximately 0.07 to 0.7 MPa ○ Wide range of spray flow adjustment with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle DOVVA-G"

2-fluid nozzle "Fan-shaped nozzle DOVVA-G"

Fine mist and medium mist generated! A two-fluid fan nozzle with a simple structure and excellent maintenance characteristics.

The "Fan-Shaped Nozzle DOVVA-G" is a high-flow two-fluid fan-shaped nozzle composed of multiple parts such as the nozzle body, pipe, and flange, capable of generating fine mist with an average particle diameter of 80μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Its simple structure allows for easy maintenance. 【Features】 ○ High-flow two-fluid fan-shaped nozzle ○ Generates fine mist with an average particle diameter of 80μm or more ○ Excellent maintenance due to its simple structure ○ Large foreign object passage diameter, making it resistant to clogging ○ Suitable for applications such as wastewater and sewage spraying For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Charging Cone Nozzle JJA"

2-fluid nozzle "Charging Cone Nozzle JJA"

Fine mist and medium mist generated! A two-fluid spray cone nozzle with a simple structure that is easy to maintain.

The "Charging Cone Nozzle JJA" consists of multiple components including the nozzle body, mixing adapter, liquid pipe, and flange, and is a large flow two-fluid charging cone nozzle that generates fine mist and medium mist with an average particle diameter of 130μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Uniform particle diameter across the entire range ○ Wide adjustment range for spray flow rate ○ Large foreign object passage diameter, making it less prone to clogging ○ Wastewater combustion in waste incineration plants ○ Easy maintenance due to its simple structure For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Fan-shaped nozzle BAVV"

2-fluid nozzle "Fan-shaped nozzle BAVV"

The foreign object passage diameter is large, making it difficult to clog! Ultra-low pressure method mist generation two-fluid fan-shaped nozzle.

The "Fan-Shaped Nozzle BAVV" consists of three components: a nozzle, an adapter, and a liquid socket, and it is a high-flow two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It has a large foreign object passage diameter, making it less prone to clogging. It is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. 【Features】 ○ Generates a fine mist with an average particle diameter of 40μm or more ○ High-flow two-fluid fan-shaped nozzle ○ Low running costs due to blower air specifications ○ Large foreign object passage diameter, making it less prone to clogging ○ Liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Filled Cone Nozzle LSIM"

2-fluid nozzle "Filled Cone Nozzle LSIM"

Lightweight and compact type! Ultra-low pressure mist generation two-fluid charging cone nozzle.

The "Charging Cone Nozzle LSIM" is a large flow two-fluid charging cone nozzle composed of multiple parts such as a nozzle tip, cap, adapter, and O-ring, capable of generating a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Liquid flows in the center of the nozzle, while compressed air flows around the outer perimeter in an internal mixing external air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Low running costs due to blower air specifications ○ Maximum particle diameter of 150μm at an average particle diameter of 80μm ○ Atomization design nozzle with no coarse particles ○ Compact and lightweight ○ Spray angle of 20° For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full Cone Nozzle JOKIJet"

2-fluid nozzle "Full Cone Nozzle JOKIJet"

Low running costs! Two-fluid filling cone nozzle using steam instead of compressed air.

The "JOKIJet Conical Nozzle" is a two-fluid conical nozzle composed of multiple parts such as the nozzle body, adapter, O-ring, and flange, using steam instead of compressed air. It features external mixing, where compressed air and liquid are mixed outside the nozzle for atomization. It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. Due to its steam specification, it can be used at low running costs in factories with boiler facilities. 【Features】 ○ Steam-driven nozzle ○ Two-fluid conical nozzle ○ Available at low running costs ○ External mixing type ○ Liquid pressurization type For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small spray conical nozzle with a wide flow adjustment range.

The "Charging Cone Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four parts: nozzle tip, core, cap, and adapter, and is a two-fluid charging cone nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two fluids ○ Ultra-compact shape with a total length of about 42mm ○ ON-OFF control function included ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

  • Water and sewerage pipe fittings

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultrafine Mist Two-Fluid Nozzle "Quick Fogger"

Ultrafine Mist Two-Fluid Nozzle "Quick Fogger"

A two-fluid nozzle optimal for targeted partial humidification, sterilization, and deodorization.

The ultra-fine mist two-fluid nozzle "Quick Fogger" is a humidification system that does not wet the inside of air conditioning units. 【Features】 Significantly reduces air consumption High specifications with uniform particle size of 7.6 to 11.2 μm Easy setup in limited spaces Variety of flow sizes available 【Details】 Spray amount: (Air pressure 0.3 MPa) Liquid = 1.0 to 4.5 L/h, Air = 30 to 40 L(normal)/min (Spray amount varies depending on siphon height.) Material: Body, cap = PP (polypropylene) Nozzle tip = SUS303 (optional: PTFE) Packing = fluororubber Connection: Air side, liquid side = Rc1/8 Dimensions: Total length 45.9 mm, maximum width 33.5 mm You can use mounting holes compatible with M5 screws and nuts. Spraying Systems, a global brand of spray nozzles, offers a variety of nozzles suitable for various applications based on a track record of over 90,000 items. *For information about spraying nozzles, please download the PDF or contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for the Use of Nozzles in the Automotive Industry

Proposal for the Use of Nozzles in the Automotive Industry

Productivity improvement, energy-saving effects, environmental enhancement.

■ Air Blow Small flat air nozzle for blowers, low pressure high flow type blower nozzle ■ Chemical & Oil Spray PulsaJet automatic spray gun + controller ■ Cleaning Clamp-type easy detachable nozzle, two-fluid nozzle + header, two-dimensional rotating cleaning nozzle, three-dimensional rotating cleaning nozzle ■ Cooling Two-fluid high-speed electric spray gun + dedicated controller, mist nozzle + pump unit ■ Heat Mitigation Mist fan

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Fluid Nozzle

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.