Fluid Nozzle(20) - メーカー・企業と製品の一覧

2-fluid nozzle "Full Cone Nozzle (Small Spray) CBIMJ"

Wide range of flow adjustment! A full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Full Cone Nozzle (Low Volume Spray) CBIMJ" is a two-fluid full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring a circular spray pattern with an even flow distribution. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that supplies liquid to the two-fluid nozzle under pressure. The spray angle is 20°. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Circular spray pattern with even flow distribution ○ Wide range of spray flow adjustment ○ Minimum spray flow in two-fluid operation ○ Compact type ○ Structure resistant to clogging For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Full Cone Nozzle (Large Spray) GSIM II"

Wide flow adjustment range! A two-fluid filled conical nozzle that generates a large volume of fine mist.

The "Full Cone Nozzle (Large Spray) GSIM II" is a two-fluid full cone nozzle that has a wide flow adjustment range and generates a large volume of fine mist. It is a two-fluid nozzle composed of multiple parts including a nozzle tip, whirler, adapter, air pipe, and liquid pipe, and it is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. The spray angle can be selected from 20° or 60°. With a air-to-water ratio of 130, it has an average particle diameter of 50μm and a maximum particle diameter of 150μm, designed for low air-to-water ratio. 【Features】 ○ Large flow type ○ Energy-saving nozzle with low air-to-water ratio design ○ Wide flow adjustment range ○ Spray angle of 20° or 60° ○ Rich series lineup For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small spray conical nozzle with a wide flow adjustment range.

The "Charging Cone Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four parts: nozzle tip, core, cap, and adapter, and is a two-fluid charging cone nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under pressure. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two fluids ○ Ultra-compact shape with a total length of about 42mm ○ ON-OFF control function included ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Filled Cone Nozzle LSIM"

Lightweight and compact type! Ultra-low pressure mist generation two-fluid charging cone nozzle.

The "Charging Cone Nozzle LSIM" is a large flow two-fluid charging cone nozzle composed of multiple parts such as a nozzle tip, cap, adapter, and O-ring, capable of generating a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Liquid flows in the center of the nozzle, while compressed air flows around the outer perimeter in an internal mixing external air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Low running costs due to blower air specifications ○ Maximum particle diameter of 150μm at an average particle diameter of 80μm ○ Atomization design nozzle with no coarse particles ○ Compact and lightweight ○ Spray angle of 20° For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle VVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle capable of thin spraying in the thickness direction with strong impact force.

The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution. ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm. ○ Capable of spraying with a thin thickness in the thickness direction and strong impact force. ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa. ○ It has a wide flow adjustment range with minimal variation in spray angle. For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle VVP+AS"

Built-in check valve on the air side! Mist fan-shaped nozzle usable for both 1 and 2 fluid specifications.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-Shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single-fluid nozzle in medium to high water flow ranges and as a dual-fluid nozzle in low water flow ranges. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow ranges, dual-fluid in low water flow ranges - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle of 60°, allowing for surface cooling For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small spray fan nozzle with a wide flow adjustment range.

The "Fan-Shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer circumference in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide flow adjustment range ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle (fine mist / ultra-compact) SCBIMV.S"

Super compact type! A small spray fan-shaped nozzle with an even flow distribution across the entire area.

The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of less than 30μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact shape with an overall length of approximately 42mm ○ No need for equipment to pressurize the liquid ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

Suction type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It is a suction-type two-fluid nozzle composed of four parts: nozzle tip, core, cap, and adapter, which uses compressed air to draw up and spray the liquid. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurization device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards the ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, as it uses compressed air to draw up the liquid and spray it. The two-fluid nozzle consists of four parts: a nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm in an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. This is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of less than 100μm ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle DOVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle with a large flow adjustment range and small spray angle variation.

The "Fan-Shaped Nozzle DOVEA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe. It is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization (a pre-mix type that mixes liquid and compressed air within the nozzle adapter). The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Uniform flow rate and particle size across the entire range ○ Wide adjustment range for spray flow rate with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements ○ Spray angles of 55°, 70°, 95°, and 110° For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

2-fluid nozzle "Fan-shaped nozzle DDA"

Fine mist and medium mist generation! A two-fluid elliptical spray nozzle that produces a large volume of fine mist with a diameter of 50μm or more.

The "Fan-Shaped Nozzle DDA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid elliptical spray nozzle that generates fine mist with an average particle diameter of 50μm or more. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (It is a pre-mixing type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Has an elliptical spray pattern, allowing for wide-area spraying ○ Liquid pressurization type that sprays at a pressure of approximately 0.07 to 0.7 MPa ○ Wide range of spray flow adjustment with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements For more details, please contact us or download the catalog.

企業：いけうち（霧のいけうち）
価格：Other

Water and sewerage pipe fittings

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluid Nozzle(20) - メーカー・企業と製品の一覧

Fluid Nozzleの製品一覧