Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 18, 2026～Mar 17, 2026
This ranking is based on the number of page views on our site.
31～60 item / All 105 items
This is a charger for fast charging with PD/QC for smartphones.
- Appearance: 1-port type C QC/PD fast charger
Single fast charger
Includes AC adapter The rapid charger and AC adapter are included as a set. Compatible models: SRS210A / SRS210SA SRS220A / SRS220SA Not compatible with standalone charging of the battery (SBR-17MH). *For more details, please refer to the related link page or feel free to contact us.
Equipped with leakage direction functionality! Enables insulation monitoring with a higher accuracy I0r value that is more aligned with actual conditions!
We would like to introduce the "LSIG-8/LIG-11," an insulation monitoring device with leakage direction functionality for low-voltage direct grounding circuits, handled by Hikari Shoko, which manufactures and sells electrical equipment. The I0r detection method detects not only the current (I0) identified by the ZCT but also the circuit voltage. Based on this voltage, it calculates and removes the current flowing through the capacitive component (reactive component: I0c) to isolate and detect only the current flowing due to insulation resistance (active component: I0r). Our I0r detection method adopts a system that inputs the actual voltage between the circuit and ground, rather than the line-to-line voltage of the circuit, allowing for more accurate insulation monitoring based on a realistic I0r value. 【Features (LSIG-8)】 ■ I0r detection method insulation monitoring device with 8 circuit aggregation ■ Equipped with functionality for 8 circuits ■ Stores and displays numerical data from the last 10 alarm activations *For more details, please refer to the PDF document or feel free to contact us.
This is a rapid charging adapter that allows for charging three devices simultaneously!
■Features - Adopts next-generation semiconductor GaN (gallium nitride). It is compact, lightweight, durable, and resistant to breakage. - Protects important devices with a multi-layer protection system. - Successfully reduced size by approximately 30% compared to conventional products. - Supports simultaneous charging through three ports. Automatically adjusts output suitable for the device for efficient fast charging. - The plug can also be stored in the main body, making it unobtrusive.
![[Tokyo Exclusive Free Installation] Ultra-Fast EV Charger FLASH](https://image.www.ipros.com/public/product/image/7ab/2001011424/IPROS16394580391336728395.png?w=280&h=280)
The largest output in the country at 180kW! A fair pricing system based on pay-as-you-go! No cumbersome membership registration required for use!
◼️ One of the largest outputs in the country at 180kW Currently, the average output of rapid chargers in Japan is said to be around 40kW. FLASH can charge at a speed that is 4.5 times faster than that. ◼️ A fair pricing system based on usage Existing EV chargers operate on a time-based charging system, where fees are incurred based on the "time" spent charging. In a situation where there are many chargers with different outputs (charging speeds), this time-based charging feels unfair to EV users. To put it in terms of a gas station, it would be like charging the same rate for a station that dispenses 10 liters in one minute and another that dispenses 50 liters in the same time. To eliminate this sense of unfairness, FLASH has adopted a pay-per-use system. ◼️ No cumbersome membership registration required! When EV users want to charge away from home, they typically need membership cards from various EV manufacturers or certification bodies. While there are methods to use chargers as a visitor without a membership card, they often require entering passwords or personal information each time, making it quite complicated and inconvenient for EV users. FLASH can be used without any membership registration or membership cards at all.
![[Access Development Case] Equipment Maintenance System](https://image.www.ipros.com/public/product/image/bde/2000670990/IPROS7894926819067426779.png?w=280&h=280)
Improving business processes with a maintenance plan based on performance data! This is an example of systematizing management that relied on manual paper information and experience-based intuition.
The equipment maintenance system is a case of system development tailored to the customer's environment. 【Challenges Before System Implementation】 - Manual management of parts inventory (using Excel or paper records) leads to discrepancies in stock levels and causes shortages. - Paper-based management of inspection standards and inspection plans makes it difficult to maintain historical records, and they can sometimes be lost. - Equipment failure responses rely on "experience" and "intuition," resulting in delays when the responsible person is unavailable. 【Objectives of Systematization】 1. Accurate maintenance planning … Conduct precise failure analysis to reduce unexpected incidents that lead to productivity loss due to equipment failures. 2. Proper parts inventory management … By managing the inflow and outflow of parts, prevent excess inventory of spare parts and shortages, ensuring optimal stock levels. 3. Prompt response to equipment failures … By sharing and accumulating information, reduce reliance on specific individuals and facilitate smooth handovers of tasks. With the introduction of this system, a business improvement framework has been established to manage all data in one place, enabling the development of maintenance plans, inventory management, and responses to equipment failures based on collected and accumulated data. *For more details, please contact us or download the catalog.
Numerous examples are included, such as improvements in the efficiency of security operations and easier decision-making for capital investment judgments!
In this case study collection, we introduce the implementation of the cloud-based equipment maintenance system 'MENTENA' that visualizes equipment maintenance. With the smooth progress of paperless operations, it has become significantly easier to accumulate and analyze data. We feature numerous examples, including that of SMK Corporation, which has centralized information management in the cloud, making internal information sharing easier, as well as Kinshuu Bio Co., Ltd. Please feel free to download and take a look. 【Featured Cases】 ■ SMK Corporation ■ Kinshuu Bio Co., Ltd. ■ Ito-Yokado Co., Ltd. ■ Sugihara Co., Ltd. ■ Denso Iwate Co., Ltd. ■ Toyo Seat Co., Ltd. ■ Nipis Fukushima Manufacturing Co., Ltd. ■ Kumamoto Daido Foods Co., Ltd. ■ Tsuneishi Camtex Co., Ltd. ■ Nishi-Nihon Railway Co., Ltd. ■ Panasonic Eco Technology Center Co., Ltd. ■ Inquiries & Company Overview *For more details, please refer to the PDF document or feel free to contact us.
[Subsidy-eligible product] High-efficiency fast charger certified with CHAdeMO protocol 2.0.1.
We handle the EV rapid charging device "50kW DSDJ Series." With excellent environmental resistance and IP55 compliant dust and water protection, it can be installed both indoors and outdoors. It features a 7-inch LCD for clear screen display. 【Features】 ■ Charging Standard Certified for CHAdeMO protocol 2.0.1 ■ High Efficiency Conversion efficiency of 90% ■ International Communication Standard OCPP Compatible Allows remote management of usage status ■ Easy Operation Clear screen display with a 7-inch LCD ■ Excellent Environmental Resistance IP55 compliant dust and water protection, suitable for indoor and outdoor installation *For more details, please download the PDF document or feel free to contact us.
Simultaneous charging of 2 devices possible! Automatic power sharing control!
We handle the EV rapid charging devices "120kW / 180kW DSYJ Series." Our regular and rapid chargers have already been adopted by customers around the world, with over 30,000 units in operation. Rapid Charger "DSYJ Series 120kW/180kW" 【Features】 ■ High Output Reduces charging time ■ Charging Standards CHAdeMO protocol 2.0.1 certified product ■ High Efficiency Conversion efficiency of 94% ■ International Communication Standard OCPP Compatible Allows for fast and efficient remote control and monitoring *Note: The 180kW boost mode model is scheduled for release in May (capable of outputting up to 150kW). *For more details, please refer to the PDF document or feel free to contact us.
Providing an in-house developed charging and operation system to solve the challenges of EV charging!
Wallbox, which boasts over 1 million units sold in 118 countries, has developed a smart charging system that combines cutting-edge technology with outstanding design, providing the best charging experience for EV users around the world. The best-selling product from Wallbox, the Pulsar Plus charger, has adjustable output ranging from 1.2kW to 8kW, allowing for high-power charging to reduce charging time, or low-power charging to save on electricity costs. Additionally, an optional demand control feature can be added.
With the use of subsidies, the installation of EV chargers can be free! Our company is an agent for EV chargers manufactured by ULTRA EV CHARGER LLC.
The "ULTRA EV CHARGER" is an EV charger specialized for fast charging (equipped with CHAdeMO standard). The 180KW charger can perform simultaneous rapid charging on two ports, delivering a maximum output of 90KW per port. It enables charging at 1KW, allowing for use with the same convenience as refueling. There are no concerns about issues such as charging amounts being below expectations due to output fluctuations. 【Features】 ■ Fast charging ■ Pay-per-use system ■ 24-hour customer service support ■ Operators purchasing can set prices flexibly ■ Eligible for full subsidies for equipment/installation work in the 7th year of Reiwa ■ Demonstrating consideration for the environment can enhance the facility's image *For more details, please download the PDF or feel free to contact us.
A 10-minute charge allows for a 20 km drive! Rescue for electric vehicle breakdowns!
"ROADIE" is a portable rapid charger for electric vehicles (EVs) that allows for easy EV charging anytime and anywhere through the included CHAdeMO connector. The charging of the battery unit itself can be done using a standard AC 100V power source, and it can be fully charged in about 4 hours. By modularizing the battery into units of 3.35 kWh, it can be expanded according to needs, and it can be transported by general vehicles or light vehicles, eliminating the need for specific vehicles. 【Features】 ■ CHAdeMO Unit - Maximum output 20 kW ■ Battery Unit - Battery capacity 3.35 kWh/unit - Can be stacked up to 4 units at once ■ Additional range of approximately 80 km - Equivalent to 4 battery units - Charging time: 10 minutes/unit *For more details, please download the PDF or feel free to contact us.
Vehicle-mounted! DC input rapid charger with a maximum output of 60kW.
This is a rapid charger compatible with DC (direct current) input. It boasts high power efficiency as it can be directly input from solar power generation or storage batteries without going through a converter. It supports CHAdeMO, CCS1, and CCS2, making it widely compatible with passenger cars, construction machinery, and ships for both domestic and international markets. It is designed compactly and can also be used as an onboard rapid charging facility. Please feel free to contact us for more details.
A must-see for those operating facilities with parking in Tokyo! You can utilize subsidies to implement it.
At GREEN CHARGE Co., Ltd., we provide installation and introduction services for EV fast chargers in Tokyo. The initial costs can be covered using subsidies, and the running costs, such as electricity fees, are designed to be recovered from users, allowing for the installation of fast chargers at facilities for free. Additionally, we carry out construction work on-site and also provide support for various application processes. 【Facilities eligible for subsidies (public charging)】 ■ Commercial facilities (shopping centers, department stores, etc.) ■ Tourist facilities (zoos, aquariums, UNESCO World Heritage sites, etc.) ■ Amusement facilities (parks, amusement parks, theme parks, etc.) ■ Public facilities (local government facilities, libraries, museums, hospitals, etc.) ■ Hourly rental parking lots, etc. *For more details, please download the PDF or feel free to contact us.
Achieving high profitability! User-first service design.
"Green Quick Charge" is an EV fast charger that can significantly reduce the charging time, which is a weakness of electric vehicles. It supports pay-per-use, allowing anyone to easily use it without a dedicated card, app, or membership registration. Additionally, it can be customized in design, making it popular among companies that want to enhance their corporate brand image by introducing EV chargers. [Features] ■ Fast charging ■ Thorough user-first approach ■ Customizable design ■ Service design that achieves high operational rates *For more details, please download the PDF or feel free to contact us.
Fast charging with a maximum of 90kW per port! Equipped with an easy-to-use boost charging cable!
We would like to introduce our 100kW rapid charger for EVs and PHVs, the 'NQD-UCX04 Series'. It allows for simultaneous charging at two ports, each equipped with a 7-inch wide color screen for concurrent operation. Additionally, its compact design requires only 0.28m² of installation space. We also offer options to further enhance convenience and comprehensive support. 【Features】 ■ Simultaneous charging at two ports ■ User-friendly design with comfortable features ■ Space-saving with high installation flexibility ■ Fast charging with a maximum of 90kW per port ■ High power charging at the start (boost function) *For more details, please refer to the PDF document or feel free to contact us.
![*Video Available* [New Product] Online Condition Monitoring Device 'SKF IMx-8'](https://image.www.ipros.com/public/product/image/f5b/2000305057/IPROS1404230114460809988.jpg?w=280&h=280)
A compact body weighing only 450g! 8-channel high-performance model.
The new model 'IMx-8' of SKF's popular series of IMx machine condition monitoring devices has arrived! It is a compact version equipped with 8 channels that truly reflect the voices of our customers. SKF's IoT not only collects data but also leads to subsequent analysis and improvements. Leveraging over 100 years of experience as a bearing manufacturer across various industries, we offer professional data analysis and recommended actions! 【Features】 - 8-channel analog input for connecting various analog sensors, including accelerometers, thermometers, pressure gauges, and flow meters - Bluetooth connectivity for verification via smartphones and other devices - 4GB internal memory, also usable as a data logger - Compact body weighing 450g and measuring 104 x 169 x 40mm - SKF Remote Analysis Center, among others 【Video Available】 We showcase examples from ships and wind turbines. Please take a look. For more details, please download the catalog or feel free to contact us.
A lightweight, compact-sized charger equipped with a charging control timer function that is easy to carry.
The BC-241 is a single charger made by Icom. It is a charger that can charge the Icom IP radio IC-SAT100. It is equipped with an LED lamp that allows for easy monitoring of the charging status. The charging lamp lights up orange during charging and green when charging is complete. It can be powered from a household AC 100V power supply. The battery can be charged whether it is standalone or attached to the radio. 【Compatible Models】 GPS Position Management System Satellite Communication Transceiver - IC-SAT100 【Features】 ■ Can be powered from a household AC 100V power supply ■ Charging status can be checked with an LED lamp ■ Can charge the battery standalone For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.
![[Equipped with Charging Timer] Fast Charger BC-202](https://image.www.ipros.com/public/product/image/eda/2000612377/IPROS74339699917591769914.jpeg?w=280&h=280)
A rapid charger equipped with a recharging function that detects battery voltage drop due to self-discharge and starts charging.
The BC-202 is a rapid charger manufactured by Icom. It is a rapid charger that can charge Icom's digital simple radio registered stations, IP radios, WLAN transceivers, and more. Equipped with a recharging function that detects battery voltage drop due to self-discharge and starts charging, it allows for high-performance operation even during long periods when the radio is not used, making it suitable for emergency situations such as BCP measures. It features an LED lamp that makes it easy to understand the charging status. 【Compatible Models】 Digital Simple Radio Registered Stations - IC-DPR3 IP Radios - IP500H - IP501H - IP502H WLAN Transceiver - IP100H 【Features】 ■ Charging timer function included ■ Charging status can be checked with LED lamp ■ Charging time is approximately 2 hours For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.
A 6-port rapid charger equipped with a smart charger function that allows simultaneous charging of up to 6 radios and starts recharging automatically.
The "BC-197" is a 6-slot rapid charger manufactured by Icom. It is a 6-slot charger that can charge specific low-power transceivers, digital simple radio registered stations, digital simple radio licensed stations, and general business radios made by Icom. It can charge up to 6 radios simultaneously. It is equipped with LED lamps that make it easy to check the charging status. The charging lamp lights up orange during charging and green when charging is complete. It features a smart charger function that starts recharging. Batteries can be charged in both standalone and radio-mounted states. 【Compatible Models】 Digital Simple Radio Licensed Station - IC-DU65B General Business Radio - IC-DV60S1 - IC-DV60S3 - IC-UH38MFT 【Features】 ■ Can charge up to 6 units simultaneously ■ Charging status can be checked with LED lamps ■ Can charge batteries in standalone or radio-mounted states For unbeatable prices on earphone microphones and batteries, trust Excely. *For more details, please feel free to contact us.
A 6-port rapid charger that can charge up to 6 radios simultaneously.
The "KSC-256A" is a 6-slot rapid charger manufactured by JVC Kenwood. It is a 6-slot charger that can charge JVC Kenwood's digital simple radio and digital general business radio. It can charge up to 6 radios simultaneously. It is equipped with LED lamps that make it easy to check the charging status. The charging lamp lights up orange during charging and green when charging is complete. Batteries can be charged both individually and while attached to the radio. 【Compatible Models】 General Business Radio - TCP-D143 - TCP-D243 - TCP-D343 Digital Simple Radio License Station - TCP-D151C - TCP-D251C Digital Simple Radio Registered Station - TCP-D551 - TPZ-D553 【Features】 ■ Can charge up to 6 units simultaneously ■ Charging status can be checked with LED lamps ■ Can charge batteries individually or while attached to the radio ■ Can be powered from a household AC 100V outlet For extremely low prices on earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.
A rapid charger that can be combined with the separately sold AC adapter UBC-8ML to charge up to 6 radios simultaneously.
The UBC-10 is a rapid charger manufactured by JVC Kenwood. It is a rapid charger that can charge specific low-power transceivers made by JVC Kenwood. A dedicated AC adapter is included, but by combining it with the separately sold AC adapter UBC-8ML, you can connect up to 6 units of this product to charge 6 radios simultaneously. *Please note that you cannot perform 6-unit charging with the dedicated AC adapter. You can charge the dedicated nickel-metal hydride battery pack UPB-5N while it is attached to the transceiver body. The charging status can be easily identified by the color of the following LED lamps: - Red: Charging - Green: Charging complete 【Compatible Models】 Specific low-power transceivers - UBZ-LS20 - UBZ-LS27R - UTB-10 【Features】 ■ Comes with a dedicated AC adapter ■ Charging status can be checked with LED lamps ■ Can charge up to 6 units simultaneously when combined with a separately sold AC adapter For extremely low-priced sales of earphone microphones and batteries, leave it to Excelli. *For more details, please feel free to contact us.
