Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 10, 2026～Jul 07, 2026
This ranking is based on the number of page views on our site.
211～240 item / All 591 items
This is a pole cover for the infrared sensors "PXB-TE series" and "BUS-XT series."
■Features When the infrared sensor is mounted on a pole, the pole section on the back of the sensor is covered, concealing the wiring to the sensor. By concealing it, security is enhanced and aesthetics are improved. It can be installed at both the top and middle sections of the pole. *Compatible pole diameter: Φ42–49mm
Pole cap (set of 10) for Φ42.7mm BPC-10
■Compatible Products KP-30L KP-30L(B) KP-48L KP-80LL KP-80LL(B) KP-80LS KP-80LS(B) KP-90L KP-100 KP-100B KP-150 KP-150B
This is an embedded box for the infrared sensors "PXB-TE series" and "BUS-XT series."
■Features This box allows for outdoor embedded installation without compromising the waterproof protection rating.
Seating Sensor BSP-33
■Features It can be placed on a wheelchair or chair. It outputs a make (a contact) when pressure is applied. When combined with a display panel and contact input transmitter (and receiver), it will notify you if the user has gotten off (or fallen from) the wheelchair. - Waterproof for daily life ● Detection output: No-voltage a contact (when pressure is applied) ● Pressure sensitivity: 1.6 to 1.8 kg/10 cm² ● Material: Surface - PVC (cream), Back - soft PVC (gray) ● Dimensions: 330 × 330 × 6 mm ● Lead wire: 1m cable with Kevlar wire (cream color/RCA plug included) ■ Dedicated jack transmitter HC-116(B) (with on/off switch): Includes two AA alkaline batteries and a strap with a clip, priced at 24,000 yen.
Wall-mounted spacer (set of 2) BWS-60TE
For more details, please refer to the basic information.
This is a wall-mounted spacer for the infrared sensors "PXB-TE series" and "BUS-XT series."
■Features ● This is an attachment for mounting an infrared sensor on the building wall while avoiding window frames and gutters. ● The depth of the spacer is 50mm. (The sensor can be mounted 50mm away from the wall.) ● If 50mm is insufficient, it can be used in combination with additional spacers. ● Comes in a set of two. *The pitch of the mounting screws is common with BWS-60TE for PB-TE (83.5mm), but since the external dimensions of the sensor differ, please use compatible options for design purposes.
Various inputs will be notified through chime sounds and LEDs. This is a display panel that can communicate with up to four units.
■ Signal input displayed by chime and LED When a signal is input from a connected device, it is indicated by a chime sound and LED. ● Input can be switched between a contact/b contact settings. ■ Output and display mode switching function There are two modes: 'Hold mode', which continuously outputs until the reset switch on the main unit is pressed, and '3-second mode', which outputs for 3 seconds and then automatically resets, allowing for settings according to the system. ■ Chime sounds and melodies selectable from various options Chime sounds can be selected from 6 types of chime sounds and 2 types of melodies. ● Ping pong / pipipipi / purupuru / pororon / ping pong pan pon / pi-po ● Always Dreaming / Seagull Sailor ■ Communication function allows for expansion up to 4 locations The display panel can be expanded to a maximum of 4 locations, making it suitable for large-scale systems. ● Operation and signal input can be performed from any of the display panels No.1 to No.4. ● Input can be received and set/reset from any CHN-1. ● Wiring between each display panel can be done with a 2-core wire, with a maximum wiring distance of 100m for each.
Every time you use it, the position of the numbers on the keypad changes; it is a high-security keypad.
■The display position changes every time. There are 6 patterns for the numeric keypad display, and the display position changes each time you use it, so specific areas do not become discolored or worn. *Depending on the settings, the arrangement of the numbers can also be displayed randomly. ■Anti-peeping function The numeric keypad uses polarized glass, so there is no worry about a third party peeping at the PIN. ■Operation prohibition function You can prohibit numeric keypad operation via external contact signals, allowing for operations such as preventing entry during security monitoring linked to a security system. ■Vandalism prevention function If the PIN is entered incorrectly 5 times in a row, a warning sound will sound for 10 seconds, and operation will be disabled for 3 minutes, helping to prevent unauthorized unlocking of the electric lock due to vandalism. ■User-friendly features and specifications ●Up to 2 operation units can be connected to one controller, allowing for control of both entry and exit. ●Settings such as the PIN will not be lost even in the event of a power outage. ●The operation unit has an IPX5 protection rating, allowing it to be installed in locations directly exposed to rain, such as the exterior walls of buildings.
Every time you use it, the position of the numbers on the keypad changes; it is a high-security keypad.
■ The display position changes every time. There are 6 patterns for the numeric keypad display, and the display position changes each time you use it, so there is no specific area that becomes discolored or worn. *Depending on the settings, the arrangement of the numbers can also be displayed randomly. ■ Anti-peeping function The numeric keypad operation area uses polarized glass, so there is no worry about a third party peeping at the PIN. ■ Operation prohibition function You can prohibit numeric keypad operation via external contact signals, allowing for operations such as preventing entry during security monitoring linked to a security system. ■ Tamper prevention function If the PIN is entered incorrectly 5 times in a row, a warning sound will sound for 10 seconds, and operation will be disabled for 3 minutes, which helps prevent unauthorized unlocking of the electric lock due to tampering. ■ User-friendly features and specifications ● Up to 2 operation devices can be connected to one controller, allowing for control of both entry and exit. ● Settings such as the PIN will not be lost even in the event of a power outage. ● The operation area has an IPX5 protection rating, allowing it to be installed in locations exposed to direct rain, such as the exterior walls of buildings.
Every time you use it, the position of the numbers on the keypad changes; it is a high-security keypad.
■ The display position changes every time. There are 6 patterns for the numeric keypad display, and the display position changes each time you use it, so there is no specific area that gets discolored or worn out. * Depending on the settings, the arrangement of the numbers can also be displayed randomly. ■ Anti-peeping function The numeric keypad operation area uses polarized glass, so there is no worry about a third party peeping at the PIN. ■ Operation prohibition function You can prohibit numeric keypad operation with external contact signals, allowing for operations such as preventing entry during security monitoring linked to a security system. ■ Tamper prevention function If the PIN is entered incorrectly 5 times in a row, a warning sound will sound for 10 seconds, and operation will be disabled for 3 minutes, helping to prevent unauthorized unlocking of the electric lock due to tampering. ■ User-friendly features and specifications ● Up to 2 operation devices can be connected to one controller, allowing for control of both entry and exit. ● Even in the event of a power outage, settings such as the PIN will not be lost. ● The operation area has an IPX5 protection rating, allowing it to be installed in locations exposed to direct rain, such as the exterior walls of buildings.
Multi-remote control switch transmitter DMR-10T
■Features It is a multi-remote control transmitter capable of operating 10 channels. It has a radio reach of approximately 100m (specific low power 314MHz band) and is waterproof with an IPX5 rating.
Information on restrooms and touch maps within railway stations, information for commercial facilities, audio guides for tourist attractions and event venues, and alerts in factories, etc.
■Operation The sound (1) will always be activated. It will switch to sound (2) when an external contact input is received. ■Features ● Voice Registration Method: Memory Card Type You can freely create sounds. You can select from our message library (standard message list of 55 types) or request custom messages (additional cost applies). ● Number of Registered Sounds: 2 sounds (individual volume adjustment available) You can choose from 4 options for the time to return from sound (2) to sound (1): real-time, 15 seconds, 30 seconds, 60 seconds. You can select from 4 options for the message activation interval: 1 second, 2 seconds, 5 seconds, 10 seconds. ● Speaker: Simultaneous activation of the main unit and external speaker or individual activation can be selected.
The alert status is clear at a glance! We respond quickly and at low cost during the addition of connected devices or facility renovations.
■Graphic Display of Alert Status The facility floor plan created as a graphic film is inserted into a panel board, displaying the alert status of various sensors received by the controller through LED lights that illuminate or blink. This clear and easy-to-understand display aids in the early detection of intruders and prompt response. ■Compatible with Controllers Depending on the size and purpose of the facility, three models are available that can categorize security and disaster prevention areas into 10, 20, or 30 districts. They can be connected to various controllers. ■Flexible Panel Design Changes The graphic film for the panel section is created using color printing from a computer, allowing for free design and display according to requests, such as color coding for each alert area. Additionally, changes to the panel design during equipment expansion or renovation can be made easily and at low cost. ■Easy Relocation of LED Positions The display LEDs are fixed with a special adhesive sheet, allowing for easy relocation with a simple touch during panel design changes or equipment relocation.
Venus Conversion Jack HC-3.5J
■Features ●Dedicated for Aiphone's Venus ●For optional input code NLR-CA-OPA *If the existing nurse call substation does not have an optional input outlet, an optional input code will be required.
iPhone NFR3 Pin Conversion Jack HC-N3J
■Features ● Jack for connecting Aiphone NFX3 pin nurse call ● Used for connecting mat sensors and various receivers ● Lead wire length: 1.5m ● Exclusive to Aiphone
It comes as a set with two door/window sensor transmitters and one portable receiver.
■Door and Window Sensor Transmitter ● It comes with a switch that staff and family members can use to turn it on and off. ● It can be easily installed on sliding doors and hinged doors (screws and double-sided tape included). It includes double-sided tape that "leaves no residue after removal," allowing for easy installation and removal without damaging the installation surface. ● The transmitter is powered by batteries, so there is no need for electrical work. ● It uses a dedicated lithium battery for long life (approximately 8 years with 20 transmissions per day). ■Portable Receiver It is rechargeable and comes with a dedicated charger. It is ultra-compact, palm-sized. It can notify you using a combination of a buzzer sound and a vibrator. You can select the notification time (20 seconds / 2 minutes / 5 minutes / 10 minutes). It features an easy-to-understand LCD display that can optionally show a 3-digit channel number. ■Repeater (Optional) RTXF-300 It relays low-power radio waves and transmits signals up to 100 meters in line of sight. Multiple repeaters can be added as needed. ■Regarding Radio Signal Range ● The radio signal range is 100 meters in line of sight. Please note that the range may be shorter depending on the structure of the building where it is used and any obstacles between the receiver and the surrounding environment.
Cold use heater (for insulation and freeze prevention) set of 2 HTF-100
■Features By installing it inside the sensor, it becomes less likely for frost to adhere during cold weather, thereby improving the operational reliability and certainty of the infrared sensor.
This is a cold region heater designed to be installed and used with an infrared sensor.
For more details, please refer to the basic information.
Detect intruders with sensors and notify you with an alarm sound! Introducing our security and disaster prevention system!
A security house well-versed in the latest crime trends, methods, and entry routes offers security planning. Our catalog features a wide range of security and disaster prevention systems tailored to your needs, so please use it to assist in product selection. 【Main Featured Products】 ■ Perimeter Security System ■ Pressure-sensitive Code Sensor System ■ Intruder Detection System ■ Arson Monitoring System ■ Direction Detection System for Sheet Shutters ■ Lighting Control System ■ Leak and Fire Detection System ■ Intrusion and Theft Prevention System ■ Emergency Notification System ■ Toilet Usage Notification System ■ Anti-Photography System ■ Access Control System ■ Surveillance Camera System
A bright red light will illuminate, and a buzzer sound will activate. It can be widely used in elderly health care facilities, senior housing, hospitals, and general households.
■Can be connected to any display panel Since it has a non-voltage contact output (a contact), it can be connected to any display panel, such as a channel display panel. ■Indicator light with buzzer When power (DC12V) is supplied, the red indicator (LED) lights up and the buzzer sounds. ■Can be embedded in the wall It is compatible with a single switch box, allowing it to be embedded in the wall.
Housing Case KH-120S
For more details, please refer to the basic information.
![[Proposal] Security System for Food Factories](https://image.www.ipros.com/public/product/image/e87/2000755931/IPROS52624843709101872634.jpeg?w=280&h=280)
Detect intruders with sensors and alert you with an alarm sound! Introducing our security and disaster prevention system!
A security house well-versed in the latest crime trends, methods, and entry routes offers security planning proposals. Our catalog features a wide range of security and disaster prevention systems tailored to various purposes, so please use it to assist in product selection. 【Main Featured Products】 ■ Security camera system for factory line monitoring ■ Safety measures system for food factory work sites ■ Automatic lighting control system ■ Office security system ■ Surveillance camera system ■ Access control system ■ Employee access management (metal detection) ■ Entry and exit monitoring notification system ■ Intruder detection system ■ Arson monitoring system ■ Outdoor material theft prevention system ■ Parking lot camera system ■ Direction detection system for sheet shutters ■ In-factory video monitoring system ■ Bus network system
A new type of motion sensor light with dimming function added to the LED! As a security light, it intimidates intruders with 100% illumination! It's energy-efficient because it's LED.
■Achieving Efficient Brightness With "chip-on-board type LED," it can illuminate a wide area evenly. ■Product Lineup for Various Applications Three models are available based on illumination levels, suitable for parking lots, facilities, and homes, allowing for a wide range of uses. ■Can Be Used as Security Lights and Night Lights with Energy Saving Utilizing the LED characteristics of "high brightness," "dimming function," and "energy saving," it can serve as a security light or convenience light during daily use, and can intimidate with 100% illumination (flashing possible) during intrusion detection, enhancing the effectiveness of implementation. *Dimming function (with day/night detection function) It dims when it is darker than the day/night detection setting. Dimming can be set from 0% to 100% illumination. ■No Electrical Work Required Includes a cord with an AC plug (approximately 3.5m). It can be used simply by plugging it into an outlet. ■Equipped with Detection Output Function Features a no-voltage relay with 1c contact, allowing for integration with cameras and external buzzers. (Detection output is terminal block type)
Powerful Jet Tear Gas Spray Liquid Type MBP-260
■Features ● It sprays in a straight line with maximum time and distance. ● It feels like a painful burning sensation if it gets in the eyes. ● Inhaling it through the mouth causes severe coughing. ● If it enters the nose, the mucous membranes inside feel a stinging pain, and sneezing does not stop. ● Touching the face or hands causes pain similar to a burn. ● The effective period of the tear gas spray is about 3 years.
Launch the net to restrain the intruder. The alarm buzzer continues to sound. (Cartridge type)
■Catch Intruders To prevent crime and deter offenses, the net is deployed 2m to 3.5m ahead to regulate the movements of suspicious individuals. The launch power has been enhanced, making it usable outdoors (even at wind speeds of 3m/sec). ■Continuous Alarm Sound Simultaneously with the net deployment, an alarm sound is emitted, which will not stop until the battery is removed, allowing it to alert the surroundings to any abnormalities. ■Cartridge System for Cost Efficiency The net launching part can be easily replaced with a cartridge system. The grip part is reusable, making it economical. ■Safety Design The net is made of fibers that become intricately tangled due to the movements of suspicious individuals, making it difficult to cut with hands. Additionally, the net launching cover is made of rubber, and the net uses rubber-coated weights, ensuring a design that prioritizes safety. The holder can be installed on a wall and can store the net launcher AL. 〈Usage Precautions〉 The batteries included with this product are test batteries, so they may expire before the specified usage time is reached. Please replace the test batteries with new ones as soon as possible.
LCD Type Fingerprint Verification OPG-TP2-PX
For more details, please refer to the basic information.
Detect intruders from boundaries such as windows and fences using infrared, and deter them with light and sound.
■Light and Sound Deterrent This is an outdoor deterrent device equipped with a high-brightness LED and an electronic siren, utilizing light and sound. ■External Alarm/Disarm Control via Control Input With control input, it is possible to link the controller's alarm/disarm function so that the deterrent operates only while in alarm mode. The control input can switch between a contact A and contact B. *Regardless of the state of the deterrent control input, an alarm output will occur. ■Two Models Available: Electronic Siren Type and Recorded Message Type - PBS-20T/PBS-20TA (Siren Type) Emits alarm sound with an electronic siren, maximum volume approximately 90dB. - PBV-15T/PBV-20TA (Speaker Type) Emits messages using recorded voice synthesis. Can record up to 16 seconds, maximum volume approximately 80dB. ■Day/Night Discrimination Function The alarm sound can be set to operate during the day, only at night, only during the day, or not at all, thanks to the day/night discrimination function. *Regardless of the settings, an alarm output will occur. - PBS-20T/PBS-20TA (Siren Type) Sound duration can be selected as 5 seconds or 20 seconds. *If used in conjunction with control input, the control input takes priority.
This device monitors the user's safety and security by allowing the user to press the "safety switch" themselves, instead of relying on a manager who cannot always observe the situation.
■Features ● The user can start the life timer by pressing the reassurance switch. If there is no switch operation within the set time, it will be judged as abnormal and will output an alert. ● The setting time for the life timer can be selected from 15 patterns. ● The operating status is indicated by two colored display lights: red and green. ● The alert delay function (pre-notification function) notifies with display lights and a buzzer. ● It can be freely installed in various locations such as living rooms, changing rooms, medicine storage rooms, and freezers (one-person workspaces). ● There are no false activations due to the installation environment, as it does not connect to a motion sensor.
Integrated detection and transmission unit! No worries about tripping over cables, etc.
■Detects pressure applied to the mat Place it beside the bed, and when a person gets off (or falls) from the bed, it detects the pressure applied to the detection unit and transmits a low-power radio signal. ■User-friendly design ● The transmitter and detection unit are integrated, making it easy to carry without tangled cords. ● The size of the detection unit is “400×800mm,” which is a standard size convenient for portability. * A series product "TX-M4512" (detection unit 450×1200mm) is also available. ● By pressing the pause timer switch, you can suspend the detection function for 5 minutes. You can extend the timer by reactivating it during this time. Use it when you do not want the detection to operate, such as during bed making or medical examinations. ● When the battery is low, it will flash the indicator light and send a low battery signal to notify you. ● The detection unit is a high-sensitivity, thin type with a thickness of 6mm, made from flexible material. ● The underside is made of non-slip material to prevent slipping on the floor. ● It has a simple waterproof structure.
Built-in power outage backup battery! Capable of responding to battery depletion of the uninterruptible power supply within the facility and power outages.
The "AMD-1" is an automatic reporting device that notifies via email or LINE in the event of a power outage, recovery, and external input signal events. It has a built-in backup battery for power outage assurance, capable of responding to battery depletion of the uninterruptible power supply within the facility or power disconnection. During a power outage, it will report the outage and recovery. When a power outage occurs, it enters a power-saving mode to minimize the consumption of the backup battery, monitoring input signals and power recovery status at regular intervals to send notifications. 【Features】 ■ WIFI 2.5GHz IEEE802.11 ■ TELEC technical standard compliance certification ■ Operates in a wide temperature range: -40℃ to 85℃ ■ Waterproof protection rating: IP65 ■ Maintenance inspection cycle: 3 years ■ Customization available from MOQ 10 *For more details, please refer to the PDF document or feel free to contact us.
