Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 17, 2025～Jan 13, 2026
This ranking is based on the number of page views on our site.
406～420 item / All 600 items
Fence Guard Bird Protection Type FG-E4
■Features ●Size suitable for installation on perennial walls and mesh fences (L-shaped fences) ●A supplementary product that prevents false alarms caused by birds flying between the detection warning lines ●Strong adhesive (sold separately)
A system for monitoring the internal temperature of a freezer/refrigerator for 1 channel!
■Easy monitoring temperature setting You can easily set the monitoring temperature using the up and down keys and the digital display. ■Monitoring temperature range is -40℃ to +40℃ The monitoring temperature range is from a lower limit of -40℃ to an upper limit of +40℃. Within this range, it can be set in increments of 0.1℃. ■Adjustment sensitivity range is 0.5℃ to 9.0℃ An alarm signal will be output if the temperature falls below the monitoring temperature by 0.5℃ to 9.0℃ (variable in increments of 0.5℃). ■High-precision temperature sensor With high-precision temperature measurement technology using a microcontroller, it will not miss even slight temperature changes. ■Self-diagnosis function It will inform you of overflow, sensor short circuit, sensor disconnection, and internal circuit abnormalities via digital display. ■Memory protection is non-volatile memory Memory protection uses non-volatile memory. The number of write cycles is 100,000. *Please connect the temperature sensor "FTB-E52" without cutting it.
Integrating the three major features of highly intimidating "sound," "light," and "camera"! It can be used for deterring illegal activities, monitoring, and guidance in various outdoor settings.
■Enhanced deterrent effect with three major functions: sound, light, and camera The human detection sensor detects people and vehicles, using sound messages and lights to deter them. Additionally, the integration with a dummy camera can provide a psychological deterrent effect. *Note: The dummy camera is for deterrent purposes only and cannot record actual footage. *Includes day/night detection functionality. ■Powerful 100W beam light It emits a powerful beam light equivalent to 100W. ■Easy-to-use voice message recording and playback You can record messages up to 16 seconds long with a simple recording type that only requires you to speak into the built-in microphone. You can also re-record different messages as many times as needed, making it versatile for various uses. ■Can be used for various purposes outdoors It can be used for safety instructions and communication in places with a 100V power supply, such as factories, plants, temples, parks, and for detecting and deterring intruders. ● Monitoring illegal dumping, parking lot surveillance, outdoor display monitoring (e.g., car dealerships) ● Safety monitoring of dangerous areas in parks and measures against stalkers ● Gate monitoring and entry guidance in factories ● Monitoring materials at construction sites, safety work instructions, and guidance for hazardous areas.
Slim, unframed sensor focused solely on essential functions.
■32 detection spots can be set The sensor has 32 detection spots, and it is possible to erase them by row. ■Stationary object detection time setting Settings of 2 seconds, 10 seconds, 60 seconds, and infinite are possible. The configurable rows are 1 and 2. Rows 3 and 4 are fixed at 2 seconds. ■Thin design with a sensor thickness of 28.5mm With a thickness of 28.5mm, the likelihood of the sensor coming into contact with the shutter when closing is reduced in environments where electric shutters are used. ■Environmental settings It is possible to reduce false triggering caused by snow, rain, insects, and vibrations from automatic door opening and closing. There are four levels: normal, level 1, level 2, and level 3. ■Interference settings If there is a risk of interference between nearby sensors, it is possible to set them to have different configurations.
High-performance sensor with doorway monitoring function compatible with installation height of 4m without blind spots.
■Supports installation heights from 2 to 4 meters Equipped with doorway monitoring functionality, it supports installation heights from 2.0 to 4.0 meters. ■Improved detection range adjustment function The width and depth can be finely adjusted for the detection range, allowing for adjustments to the detection area based on the installation environment. ■Industry-leading 60 spots With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. ■Enhanced environmental and insect countermeasures With three levels of "environmental countermeasures" and insect countermeasure functionality, it further strengthens measures against malfunctions caused by snowfall and flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when temperatures predict snowfall, reducing malfunctions caused by snow. *When environmental countermeasures are set, the level of environmental countermeasures automatically increases by one level at low temperatures. ■Status indication with 7-color LED The 7-color LED display allows for confirmation of settings (snow/insect mode) and detection range, making it possible to identify malfunctioning rows. ■User-friendly design ● Equipped with mutual interference prevention functionality to prevent malfunctions caused by interference with adjacent sensors (6 frequencies). ● Includes a self-diagnostic function to assess infrared emission capability.
Flat finish that does not compromise the aesthetics of the building, compatible with a maximum installation height of 4.0m for built-in type with no visible seams.
■Secure high-density areas With industry-leading 60 spots (with doorway function), stable high-density areas can be secured even with high doors (up to 4.0m). ■Area adjustment function The area adjustment function has been improved, allowing width and depth to be adjusted one row at a time. ■Easy-to-understand operation display In detection range confirmation mode, the color of the display LED changes for each stepping row, making it easier to measure areas and identify rows experiencing malfunctions. During monitoring, the presence or absence of snow level and insect mode settings can be identified by color. ■Equipped with eco mode to reduce unnecessary door opening time after passing through automatic doors. ■Common notch dimensions It can be directly replaced with the notch of conventional products (43mm×244mm). ■Environmental settings Snow mode is divided into three levels, enhancing malfunction prevention compared to conventional products and reducing sensitivity decline (compared to our products). When the temperature drops, the set snow level turns ON, and when it rises, it automatically switches OFF. This helps reduce the workload of changing settings due to sudden weather changes.
High-performance light beam active sensor ideal for activating sheet shutters up to 4.5m in size.
■Compatible with installation heights of 2 to 4.7m and equipped with shutterway monitoring function The shutterway monitoring function is compatible with installation heights of 2.0 to 4.7m. ■Improved detection range adjustment function It is possible to adjust the detection range for each row in width and depth, allowing for area adjustments tailored to the installation environment. ■Industry-leading 60 spots With an industry-leading 60 spots, it maintains a high-density detection range even when installed at high locations, enhancing safety. ■Enhanced environmental and insect countermeasures The "environmental countermeasures" feature has three levels, and the "insect countermeasures" function further strengthens measures against malfunctions caused by snowfall and flying insects. Additionally, using the automatic environmental countermeasure setting function, it automatically switches to environmental countermeasure mode when the temperature reaches a level where snowfall is predicted, reducing malfunctions caused by snow. *If environmental countermeasures are set, the level of environmental countermeasures will automatically increase by one level during low temperatures. ■Status display with 7-color LED The 7-color LED display allows for confirmation of the setting status (environmental countermeasures and insect mode) and detection range confirmation mode, enabling the identification of rows experiencing malfunctions.
This one unit is sufficient for a 6m square sheet shutter! (Can be installed up to 6.5m)
■Wide-area and high-density detection patterns Five-column areas, including just before the shutter, have been arranged, with each column featuring 12 high-density pattern areas (a total of 60). The installation height can be up to 6.5 meters, achieving a wide detection area. (Optical area: height 6.5m × width 6.9m × depth 4.2m) ■Direction discrimination function By setting the direction discrimination function, unnecessary opening and closing of the shutter can be reduced. The directionality can be selected from the following four patterns: 1. All-direction detection 2. No detection of lateral entry 3. No detection of exit from the shutter side 4. No detection of exit from both lateral and shutter sides ■Malfunction reduction function By combining the new insect mode with environmental countermeasures, malfunctions caused by environmental changes such as dirt on the ground, snow, and insects can be reduced. ■Shutter way function By using the separately sold wedge-shaped base (model number WD-6500), a detection area setting for the shutter way can be established, enhancing safety. ■Detection area setting function The depth area can be set from 5 columns to 1 column, and the width area can be independently adjusted left and right, allowing for the deletion of detection areas for the two outer spots, enabling fine area settings tailored to the site.
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the installation height of the sensor to establish a stable area. ●The microcontroller automatically controls radio waves, wind, and external noise to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for activating automatic doors. *If there are uneven walls or similar features in the surrounding installation environment, reflections from the walls may occur, potentially reducing sensitivity, so please be cautious of the environment.
Three-dimensional area stationary detection type safety switch for automatic doors.
■Features ●This safety sensor is ideal for ensuring safety with circular doors, as it has a three-dimensional area. ●With initial settings, the microcontroller automatically assesses the surrounding environment and the height of the sensor installation to establish a stable area. ●Radio waves, wind, and external noise are all automatically controlled by the microcontroller to eliminate false triggers. ●Temperature changes are also automatically corrected by the microcontroller, ensuring optimal operation at all times. *Please note that the monitoring operation starts with an external activation input (voltage-free contact), so it cannot be used as a security sensor or for automatic door activation. *Be cautious of the installation environment, as irregular walls may cause reflections that can reduce sensitivity.
Adopting a specific low-power method! (Using the 2.4GHz band) The transmission distance of the radio waves has been further extended, improving the reliability of the signals.
■Miniaturization of the receiver By miniaturizing, we can make more effective use of the limited space within the automatic door engine. ■Miniaturization of the transmitter Due to its thinness, there are fewer constraints on installation locations. ■Clarification of the operation indicator light The operation indicator light has been made brighter than conventional models, making it easier to confirm operation. ■Interference prevention function Using the 2.4GHz frequency band, signals from 3 channels are sent in sequence to ensure reliability and prevent interference. ■Improvement of operability ● A hand mark has been added to the operation section, clarifying the position for operation in the panel design. ● The click sensation felt by the hand upon touch has been enhanced.
A simple and stylish touch switch with antibacterial specifications!
■Interference Prevention The registration method for the touch switch (transmitter) has two options to prevent interference. ■ Select Switch Mode: Same channel code setting as conventional models ■Check Reception Status The reception status can be confirmed by the color of the LED on the receiver, whether it is off or on. ■Improved Environmental Resistance DAW-71 (transmitter): IPX3, DAW-81 (receiver): IPX7. The DAW-81 has a waterproof structure, allowing it to be installed outdoors. ■Antibacterial Specification The touch plate area is now antibacterial. Additionally, the displayed text will not fade. ■Simple Design The touch plate area features a simple design with a luxurious feel, making the text easy to read. ■User-Friendly Design ● Maintains compatibility with conventional products (DAW-1, 3, 5, 7, 70 series) ● The operation indicator LED changes from off to blinking to notify when it's time to replace the battery. ● The transmitter uses two readily available AA batteries.
A simple and stylish touch switch with antibacterial specifications!
■Interference Prevention The registration method for the touch switch (transmitter) has two options to prevent interference. ■Select Switch Mode: Same channel code setting as conventional models ■Check Reception Status The reception status can be confirmed by the color of the LED on the receiver, whether it is off or on. ■Improved Environmental Resistance DAW-71 (transmitter): IPX3, DAW-81 (receiver): IPX7. The DAW-81 has a waterproof structure, allowing it to be installed outdoors. ■Antibacterial Specification The touch plate area has been made antibacterial. Additionally, the displayed text will not fade. ■Simple Design The touch plate area features a simple design with a luxurious feel, making the text easy to read. ■User-Friendly Design ● Maintains compatibility with conventional products (DAW-1, 3, 5, 7, 70 series) ● The operation display LED changes from off to blinking to indicate when the battery needs to be replaced. ● The transmitter uses two readily available AA batteries.
The automatic door opening and closing is announced by voice. This helps ensure safety near the automatic door.
■First voice device linked to the movement of automatic doors ●Opening message "The door is opening, please be careful." (The opening message can be turned off by operating a switch) ●Closing message "The door is closing, please be careful." (The closing message can be turned off by settings) With the controller (DSV-100), door opening time timer control and door closing signal (included magnetic switch) input, voice announcements linked to the door's movement are possible. ■Compact and user-friendly design ●The controller has a compact shape and can be installed in a concealed area. ●It can be linked with a sensor and touch switch. ●It can be easily installed on existing automatic doors. ●The volume of the voice can be adjusted. (Silent to 85dB) ●Speakers (sold separately) can be selected based on the installation environment. ■Improved safety ●Messages can be played when the door opens, enhancing safety on the pocket side. ●It is also ideal as a guidance device for people with disabilities and the elderly.
![Wireless Remote Control Switch [2CH x 3 Point Type] DR-243T](https://image.www.ipros.com/public/product/image/1bd/2000733844/IPROS54988712813938303244.jpeg?w=280&h=280)
The transmitter is designed with a focus on operability, featuring a shape that fits comfortably in the hand.
■2CH3-point type The transmitter is a 2CH 3-point type. The transmitter allows you to select the display of "Open, Stop, Close" and "1, 2, 3" using the included sheet. It is ideal for wireless control of automatic doors, garages, gates, etc. By using them individually, control of up to 6 locations is possible. ■Reach Distance The maximum reach distance is approximately 40m with a specific low power. ■Output Switching Function By changing the settings of the receiver, it can be switched between one-shot output and latch output. ■Number of Registrable Units The receiver can register up to 100 IDs. ■Easy Installation The receiver is compact and can be easily housed within the control unit, with only the antenna being able to be placed outside. (Antenna cable 4m)
